|
| 1 | Supply and delivery of Light Commercial Vehicle with following Specifications |
| 2 | Displacement (CC) / Engine capacity.-700 CC - 1250CC |
| 3 | Max Power-20-30BHP @ 2500 rpm and above |
| 4 | Max Torque-500NM @ 2000 rpm and above |
| 5 | Type of fuel-Diesel |
| 6 | Load Capacity-2 cu. m |
| 7 | Vehicle emission Norms-BS - VI |
| 8 | No of cylinder in engine-2 - 4 cylinder |
| 9 | Length of chassis-3800 mm - 3950 mm |
| 10 | Width of chassis-1500 mm - 1550 mmGround clearance. 150 mm - 165 mm |
| 11 | Fuel tank capacity-Diesel - 30 Ltrs to 40 ltrsCNG - 12 -25kg |
| 12 | Size of Tyre\"s & No\"s-145 R 12 - 5Nos |
| 13 | wheel base-1900 mm - 2250 mm |
| 14 | Gross vehicle weight-1550 kg - 1900 kg |
| 15 | Clutch-Single plate dry friction diaphragm |
| 16 | Transmission System-Manual |
| 17 | No of speed/ forward gears-4 Nos Speeds(4F+ 1R) |
| 18 | Type of Steering-Manual / Power |
| 19 | Speed Governors-Shall be Fitted |
| 20 | Pay Load-800Kg to 1000Kg |
| 21 | Tipper body length-2100 mm-2200mm, Mild steel |
| 22 | Tipper body Width-1400 mm -1500mm, l4ild steel |
| 23 | Tipper body Height-750mm- 950 mm, Mild steel |
| 24 | Side portion (LH&RH)& rear doors Sheet thickness-2 mm, Mild steel |
| 25 | Tipper body top sheet including frame sheet thickness-1.6mm, Mild steel |
| 26 | Tipper Body Top Lid Sheet thickness-1.2mm, Mild steel |
| 27 | Tipper Container-Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and lockingsystem. A partition should be provided on the middle of container along the vertical lenqth of the body. |
| 28 | Tipper Body Top Lid main Sheet thickness-75x40x6mm |
| 29 | Hyd rau lic cylinder make-Reputed Make |
| 30 | Hydraulic system driven-Main Engine |
| 31 | Pump Make-As per IS standard |
| 32 | Painting-Should be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistancefor weatherizing and breakage. The color shade should be as per norms. |
| 33 | Lettering-To be carried out as directed by Dept officers |
| 34 | Tipper body rear door-Shall be with necessary lockinq facility |
| 35 | Side safety guard-Shall be provided as per RTO requirement |
| 36 | Additional conditions-Vehicle with fuel sensor and GPS tracking. |
| 37 | Warranty Distance/Year-2500KM/12 months whichever isearlier. |
