Tender For Electric Work Of Asangvi Jat Branch, Sangli-Maharashtra

Tender For Electric Work Of Asangvi Jat Branch => Limited; 1. PVC wires- FR - RR Cable Unilay/ Finolex /any other approved by consultant. 2. Cables - Polycab / Finolex 3. Telephone &CoaxialCable - RR Cable / Finolex / Polycab 4. Casing & Capping - Modi / Presto-plast. 5. PVC pipe/ accessories - Presion / Finolex 6. Al. lugs - Dowels / CTI / Jaison 7. Cable glands - HMT/ Jainson / Braco 8. Switches (Modular) - Legrand Myrius ,Arteor,Mylinc 9. Switches-regular - ------------ 10. MCB/DB - Legrand, C&S 11. Light Fittings - Wipro / Philips 12. Ceiling Fan/Wall Fan - Crompton High Speed / Bajaj Ultima 13. Exhaust Fan - Almonard / Havel’s/Crompton 14. Earth strip/wire - EC Grade Or equivalent 15. DATA UTP CABLE / INFORMATION OUTLET - D-LINK/ MOLEX 16 4+1 Camera cable/Cat-6 - Finolex / R.R. 17. Any other - TO BE APPROVED BY CONSULTANT B POWER SUPPLY AND BRANCH ELECTRIFICATION 1.0 MDB SITC of 6 way VTPN MCB incomer double door DB with the following Incomer :- 63A 4P MCB Outgoings :- 40A 3P MCB -1 Nos(LDB Input ) 63A SPMCB - 1Nos(UPS INPUT) 16Amp SP MCB-3 (Power point & Signboard) 40A SP MCB-1No (Inverter Input) 25Amp SP MCB-4No (Spare) Set 1.0 1.2 LDB SITC of 4way TPN MCB DB double door type with the following Incomer :- 40A 4P RCCB -30MA Outgoings :-10A SPMCBs- 8 Nos for lighting circuits Nos. 1.0 1.3 UPS DB INPUT Supply, installation, testing and commissioning of 2 way SPN MCB DB type with 63Amp DP MCB Nos. 1.0 1.4 UPS DB OUTPUT Supply, installation, testing and commissioning of 8 way SPN MCB DB with Incomer 1 No. 40A, DP Isolator, Outgoings 6 Nos 10A SP MCBs Nos. 1.0 1.5 INV DB INPUT Supply, installation, testing and commissioning of 2 way SPN MCB DB type with 40Amp DP MCB Nos. 1.0 1.6 INV DB OUTPUT Supply, installation, testing and commissioning of 6 way SPN MCB DB with Incomer 1 No. 16A, DP Isolator, Outgoings 4 Nos 10A SP MCBs. Nos 1.0 1.7 MAIN SWITCH. Supply and installation of 150 Amps MCCB with Enclousre suitable for cable termination etc.complete at Meter board. Nos 1.0 1.8 MASTER SWITCH Supply, installation, testing and commissionin of 1 No. 40A, contactor switch in LDB and 1No 6Amp Switch with modular box & plate.( Near Entrance Door to Cut off all the lighting load when branch is closed) Nos. 1 2.0 POWER POINTS 2.01 RAW POWER POINTS a. SITC of Modular Type AC box with 20A SP MCB & power socket (for AC) Nos. 0.0 b. SITC of 16 Amps Power outlet/Modular Type with 16 Amps switch and socket for Note counting and Power points. Nos. 2.0 c Supply and providing 1Nos. 5A multi pin socket with 1 No. 6A SP control switch and mounted in a suitable switch board including all inter connections Nos. 5.0 3 UPS POWER POINTS a. Supply and providing 3 Nos 5A multi socket with 1 No. 16A SP control switch and mounted in a suitabel switch board including all inter connections (All work stations, Switch should be at top of the table and sockets at below the table) Nos. 5.0 b. Supply and providing 2 Nos 6A multi pin socket with 2No. 6A SP control switch and mounted in a suitable switch board including all inter connections. (EPABX,SECURITY ALARM) Nos. 4.0 c. SITC of 16A /6A modular socket outlet with 16A SP switch with in suitable switch baord (for data rack) Nos. 2.0 4.0 LIGHTING AND FAN POINTS Supply of all materials and wiring for light/fan/5A on board points using 1.0 Sqmm PVC insulated standard copper conductor wire for individual lights and 1.5 Sqmm wire for group light points along with.1.0 sqmm insulated earthing wire through 20/25mm dia rigid PVC conduits of ISI grade with all accessories including fixing modular switches ceiling roses etc. where ever necessary. a. One light point controlled by one No. 6A switch Nos. 20.0 b Secondary Light Point (loop point) Nos 0.0 c One Ceiling fan points controlled by one No. 6A Switch with step Regulator Nos. 5.0 d One exhaust fan point controlled by one No. 6A switch at lighting control board and socket at Exhaust fan. Nos. 2.0 e One 6A on board plug point Nos. 8.0 f Call bell point excluding supply of bell for Managers cabins. Set 1.0 g Wall Fan Point Nos 0.0 5.0 SUBMAIN CIRCUITS Supply of all materials and wiring for circuit maing, using the following sizes of PVC insulated copper wire through 20mm dia rigid PVC conduit ISI black with all accessories under surface conduit system with G.I. spacer saddles or in recess as required. a. Raw power mains running -3 run 1.5 Sq.mm Copper wire Mtr 110.0 b Lighting Main running -3 run 2.5 Sq.mm Copper wire Mtr 140.0 c SIGNAGE BOARD Main running -3 run 2.5 Sq.mm wire Mtr 25.0 d UPS Input + O/P Main running - 3Core 6.0 Sq.mm copper flexible cable Mtr 8.0 e UPS OUTPUT Point running- 3 core 1.5 Sq.mm copper wire Mtr 140.0 6.0 CABLES Supply and laying the following sizes of Copper cables including necessary supports etc a 4 core 10 sq.mm copper armoured cable (From meter board MCCB to MDB) Mtr 35.0 7.0 CABLE TERMINATIONS Supply of all materials and providing end terminations for the following sizes of PVC cable using suitable glands and sockets a 4 core 6/10 sq.mm cable Nos. 4.0 b 1.5/2.5/4.0/6.0 sq.mm cable 3/4 core. Nos. 12.0 8.0 LUMINAIRES AND FANS Supply, installation, testing and commissioning of the following luminaires/ fans using suitable mountings, 3 - core extension wire, Cool white lamps, MS tube down rods etc. complete as required. a 20W LED WIPRO/PHILIPS slim line WIPRO-WRF-82136 EBQ Nos 16.0 b Recessed / surface luminaires with Angle /Batten holder with 9W LED Bulb etc complete. Nos 4.0 c. 300mm heavy duty exhaust fan Nos. 2.0 d 48 High speed ceiling fan white colour with necessary down rod and fastener hook clamp etc. complete. Nos. 5.0 9.0 VOICE SYSTEM (TELEPHONE) a. Supply and laying 2 pair un armoured telephone cable Through 20mm rigid PVC conduit ISI black Mtr 125.0 b. Supply and providing telephone outlet points using RJ-11 modular sockets / jack within suitable switch board Nos. 5.0 c. Supply and providing Telephone Terminal box, sheet Steel Powder coated with 10 Pair Crone including all terrminations and PVC box and hardware etc complete. Nos. 1.0 10.0 EARTHING 10.1 EARTHING STATIONS a. Supply of all materials and providing standard plate earthing stations using 300x300x3.2mm copper plate earth electrode as per BIS specifications (UPS+ General) Earthing should be done infornt of consultant or his representitive. Nos. 2.0 11 EARTHING CONDUCTORS Supply and laying the following sizes of bare copper earthig conductors in PVC conduit pipe including terminations, bracing the joints etc. as per standards. a. 16 Sq.mm copper single core with copper lugs at both ends Mtr 60.0 12.0 DATA CABLING WORK a Supply and laying of CAT-6 UTP cable of MOLEX/DIGILINK/AMP make through 25mm rigid PVC conduit ISI black. Mtr 150 b Supply and fixing MOLEX/DIGILINK make single port IO with TR Box.CAT-6 Nos 6 c Supply and fixing 7 feet / 2 meter long patch chord. Nos 7 d Supply and fixing 1 meter long patch chord. Nos 9 e Supply and fixing 6U WALL Rack Nos 1 f. Supply and fixing of Cantiliver Tray Nos 1 g Supply and fixing 24 port patch panel.- CAT-6 Nos 1

INR 750 /-

INR 2.0 /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB