Tender For Sabarimala Devaswom M M Festival In 1201Me Repair And Replacement Of Existing Damaged Electrical Installation To The Temple Structures And Various Buildings In And Around At Sabarimala Supply Of Electrical Materials Reg

Sharing tender

Tender For Sabarimala Devaswom M M Festival In 1201Me Repair And Replacement Of Existing Damaged Electrical Installation To The Temple Structures And Various Buildings In And Around At Sabarimala Supply Of Electrical Materials Reg--- 1 APPENDIX-ISupply of Electrical materials at Sabarimala. 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 2 2.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable 3 4.00 sq mm ISI marked FRLS PVC insulated single core copper conductor cable 4 6.0 sq. mm ISI marked, FRLS PVC insulated,single core copper conductor cable 5 20 mm dia, ISI marked, PVC conduit 6 25 mm dia, ISI marked, PVC conduit 7 20 mm PVC bends 8 25 mm PVC bends 9 20 mm PVC couplers 10 25 mm PVC couplers 11 20 mm PVC junction box, one way 12 20 mm PVC junction box, two way 13 Ceiling rose, 3 pin, 5 amps ISI marked 14 S.P. 5/6 amps, one way modular switch, ISI marked 15 S.P. 15/16 A, one way modular switch, ISI marked 16 3 pin 5/6 amps modular socket outlet, ISI marked 17 6 pin 15/16 A modular socket outlet, ISI marked 18 Modular bell push, ISI marked 19 Stepped type Modular Fan regulator (2 module) 20 Modular blanking plate 21 Modular base & cover plate for 1 module 22 Modular base & cover plate for 2 module 23 Modular base & cover plate for 3 module 24 Modular base & cover plate for 4 module 25 Modular base & cover plate for 6 module 26 Modular base & cover plate for 8 module 27 Modular base & cover plate for 12 module 28 S.P. 5/6 amps,one way switch, piano type ISI marked 29 3 pin 5/6 amps socket outlet, piano type ISI marked 30 Brass pendant holder 31 6 amps. to 32 amps. ratings, SP MCB, C curve,10KVA breaking capacity. 32 Single pole, blanking plate 33 40 amps., 2 pole isolator 34 63 A, 2 pole isolator 35 40 amps., 4 pole isolator 36 63 A, 4 pole isolator 37 100 amps., 4 pole isolator 38 40 amps. rating, 2 pole RCCB, 30mA 39 40 amps. rating, 4 pole RCCB, /30mA 40 63 amps. rating, 4 pole RCCB,30mA each 41 2+2 way, SPN, single door, MCB DB 42 6 way , SPN, Double door, MCB DB 43 8 way, SPN, double door MCB, DB 44 12 way, SPN, double door, MCB DB 45 4 way (4+12), TPN, MCB DB, double door, horizontal type 46 8 way (4+24), TPN, MCB DB, double door, horizontal type 47 4 way (4+12), TPN, vertical type, MCB DB, double door 48 8 way (4+24), TPN, vertical type, MCB DB, double door 49 Straight through cable jointing kit with heat shrinkable kit with ferrules for 3 1/2 X 35 sq.mm 1.1 KV grade cable 50 GI saddle 20mm x 3 mm 51 1.0sqmm ISI marked FR LS PVC insulated single core copper conductor cable 52 24/0.20 sqmm twin core ISI Marked FR LS PVC sheathed round copper conductor cable 53 48/0.20 sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable 54 80/0.20 mm sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable 55 128/0.20 mm (56/0.30 mm) three core ISI marked FR LS PVC sheathed round copper conductor cable 56 80/0.20 mm sqmm four core ISI Marked FR LS PVC sheathed round copper conductor cable 57 128/0.20 mm (56/0.30 mm) four core ISI marked FR LS PVC sheathed round copper conductor cable 58 6 A 3 pin plug top 59 16 A 3 pin plug top 60 2 module Moulded Plastic boxes 61 3 module Moulded Plastic boxes 62 4 module Moulded plastic boxes 63 6 module Moulded Plastic boxes 64 8 module Moulded Plastic boxes 65 10 module Moulded Plastic boxes 66 Normal size 8W BC/ ES(LED) 67 1200mm,LED Tube 68 1x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside(including LED Tubes). 69 2x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes). 70 Surface mounting 40 W LED Batten with output of 4000 lumen for use on 230 V AC supply 71 400 mm sweep Wall Mounting fan 72 250 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C 73 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C 74 450 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C 75 2.5 mfd. Capacitor 76 40 A to 63 A, DP MCB (C curve), 10 kA breaking capacity 77 40 A to 63 A, TP MCB (C curve), 10 kA breaking capacity 78 40 A to 63 A, TPN MCB (C curve), 10 kA breaking capacity 79 40 A TP MCB isolator 80 63 A TP MCB isolator 81 100 A TP MCB isolator 82 25/32 A FP MCB isolator 83 adhesive pvc insulation tape 84 20 mm PVC Junction Box three way 85 20 mm PVC Junction Box four way 86 pvc grip 87 PVC Round block 88 100W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Thirdparty lab to be produced mentioning chip manufacturer) 89 200W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make ree/Lumilled/Nichea with power factor >0.95 at full load, internal surge rotection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer)(colour-Warm) 90 100W LED Street light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Thirdparty lab to be produced mentioning chip manufacturer) 91 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), 300mm down rod , 2 number canopies, shackele kit, Copper winding, 3 number blades and all remaining accessories including safety pin, nut bolts, washers suitable for 230V/240V single phase AC supply 92 1800 lumen round/ square(1X1) recessed fitting made of diecast aluminium, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea 93 4000 lumen (1ft X 4ft) recessed fitting made of crca sheet of thickness 0.5mm, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea 94 1800 lumen round/ square surface mount fitting made of diecast aluminium, having efficacy not less than 100l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea 95 Supplying GLS 60W clear bulb in the existing fitting as required 96 Supplying and40W FT starter in the existing fitting as required(FSU-Bajaj) 97 Supply and providing resistance type regulator for 1200mm sweep ceiling fan and giving connection as required 98 SupplyAluminium Flat Wire 2.5 SERVICE WIRE 99 SupplyAluminium Flat Wire 4MM SERVICE WIRE 100 Supply LED BULB .5W HAPPY POWER 1Y 101 Supply 6A one way bed switch 102 Supply 5 in one socket and switch 20&10A 5in 1 combined unit 240V 50HZ 103 SupplyAluminium Flat Wire 6 MM SERVICE WIRE 104 SupplyAluminium Flat Wire 10MM SERVICE WIRE 105 Flexible Hose 20mm Steel Reinforced 106 LED LAMP 50W 107 LED LAMP 30W 108 Pedestal Fan 109 Sintex Box 20x14 110 Sintex Box 30x20 111 Sintex Box 15x10 112 Industrial Plug 32A 5pin 113 Industrial Socket 32A 5Pin 114 APPENDIX-IILabour engaged for watching and maintenance to the existing electrical installation to the temple structures, various buildings and yard light installed in and around at Sabarimala. Dismantling and removing the damaged accessories from the existing electrical installations and also stacking carefully.Electrician 115 wire manhelper 116 5nos of electricians shouldbe engaged round the clock for fault attending around the temple premises andvarious locations including trekking paths, Pandithavalam etc. as per the directions of departmental officials at site (2 shift / day) for 80 days during the period from 01.11.2025 to 19.01.20265nos of Electrician /Day for 80days 117 Labor engaged for controlling the electrical installation along the trucking path ( Q complex to Sabaripeedam etc…)2nos electrician per day for 66days during the period from 15.11.2025 to 19.01.2026.(2 shift/day) 118 Labor engaged for engaging store keeper 2nos electrician per day for 69 days during the period from 12.11.2025 to 19.01.2026.