Tender For Repair And Cleaning Of Sewage Line, Manholes, Septic Tanks, Soakage Wells Etc And Certain Misc Works In Zone ‘A’ And Zone ‘B’ At Shahjahanpur Cantt Under Ge (East) Bareilly; 1 Cleaning /clearing blocked sewage line 100mm to 300mm dia (PVC/ SGSW/RCC hume pipe) any depth by rodding between manhole to manhole manually incl pumping out sludge water from manholes septic tank/soak well etc (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 30 mtr delivery pipe including clearing spot blockages of WC, wash hand basins, sinks floor traps, NT and drainage pipes etc withand incl 2 safaiwala at 0900hrs to 1700 hrs on working days incl disposal of debris spoils and sludge hygiencially complete all a specified and directed.(Notes:- i) The contractor /his authorise supervisor of the work will report daily at complain cell AGE B/Rat0830 hours to receiveday to day complaints.ii) All sewage complaints must be attended immediatly on receipt but not later than 24 hours. iii) Recovery (penalty ) for not attending complaint beyond 24 hours shall be Rs. 100.00 per compaints per day delayed 2 Digging out sludge etc from oxidation pond, septic tank, sump well, man holes including depositing in pits where directed to a distance exc 50m but n exc 250m complete all as specified and directed .Note- The unitrate quoted under this item shall deemed to include all the arrangement ofnecessary T&P with man and materialfor lifting up sludge from oxidation pond, septic tank, sump well, man holes,excavation ofpit ,deposing sludge and cover with earth complete all as specified and directed. 3 Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete. 4 M&L cementconcrete 1:2:4 tpe-B1 as in landings, cover slabs (for manholes etc) Chula hoods, chajjas, water through managers shelves and similar articles with plain faces set in cementmortar 1:4 complete all as specified. 5 M&L precast cement concrete with outer MS lining & reinforcement of size exc 0.3 sqm and n exc 1 sqm,75 mm thick with handle,etc 6 M&L mild steelbars (TMT) 10mm dia, and overcut to lengthbent to shaperequired includingcranking, bendingspirally for hopingends forcolumns, hookingends and bindingwith andincludingmild steelwire annealed not less than 0.9 mm dia or securing with clips 7 Excavatingin trenches , not exceeding 1.5 mtr widebut not exceeding1.5 m in depthfor foundation etc or for shafts, well cess pits manholes, pier holes etc and gettingout in soft/loose soil completeall as specified. 8 All as per Srl item No 7 here in before but exc 1.5 m but n exc 3 m in depth 9 Demolition and breaking up drain pipes 200mm internal diaof pipe (Salt glazed stone ware) , AC or Reinforced concrete) set in cement mortar. 10 Demolition and breaking up drain pipes 150mm internal diaof pipe (Salt glazed ware , AC or Reinforced concrete) set in cement mortar. 11 M&L200mm boreRCC NP2 stone ware drainpipe laidin trenchesand jointedas specified. 12 M&L 150mm bore RCC NP2 stone waredrain pipes laid intrenchesand jointedas specified. 13 M&L plaincementconcrete(1:4:8) type D2 (using 40mm graded stone aggregate)bedto 200mm bore drain pipes including packingunderand hunchingagainst thesidesofthe pipesafter they arelaidand tested in. complete all as specified and directed. 14 M&Lplain cementconcrete(1:4:8) type D2 (Using 40mm graded stone aggregate) bed to 150mm bore drainpipes includingpacking under hunchingagainst the sides of pipes afterthey are laidand tested in complete all as specified and directed. 15 Retuning, fillingin includingspreading, levellingwateringand wellrammingin layer not exceeding25cm thick in soft/loose soil completeall as specified. 16 Removingexcavatedmaterialssoils not exceeding50m anddepositingwhere directed at a levelnot exceeding1.5m abovethe startingpoint complete all as specified. 17 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level). 18 M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed. 19 Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd. 20 M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed. 21 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for. 22 M&L for cement concrete (1:5:10) type E-2 as infoundation filling and mass concrete 23 M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mmmicron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where requiredover 10 mm thick rendering in CM 1:4 includingintegral waterproofing compound 3% and taking down existing plasteringas per manufacturer instruction and complete all as specified and directed 24 Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles 25 M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. 26 M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed 27 Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. 28 M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement 29 M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified 30 M&L for two coats of cement base paintincl preparation of newsurface of wall complete all as specified and as directed. 31 M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified 32 M&L preparation of old decorated surfaces & applying one coat of white wash on ceiling complete all as specified and directed. 33 M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed. 34 M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd. 35 Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises 36 M & L Glazed ceramic coloured tilesin vertical surface 350 mm x 250 mm x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white cementor colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed. 37 M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to matchcoloured tiles including 15 mm thick cement screed bed in CM 1:6complete all as specified and as directed. 38 M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etcincluding 15 mm thick screed bedin CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement incluto matchcoloured tiles complete all as specified and as directed. 39 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. 40 S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. 41 S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC C channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing. 42 S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed. 43 S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 44 S&F, 150 mmaluminium handles cast type, anodised complete all as specified and as directed. 45 S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. 46 Supply only plastic water closet seat cover closed pattern with flat bottom and coverand mild steel chromium plated or aluminium hinging device 47 S&F in repair vitreous china squatting pan orissa pattern size 580mm*440mm white with integral foot rests excluding flushing cistern and flush pipe all as specified and directed 48 S&F in repair for CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed. 49 Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed 50 All as above herein before but 20 mm dia 51 S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 52 Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceilingand wall all as specified and dircted 53 S&F, GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors. 54 Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceilingand wall all as specified and dircted 55 Dismantling ofexisting water tanks capacityn exc 500 ltr and removing to store 56 Dismantling ofexisting water tanks capacityexc 500 ltr n exc 1000Ltsand removing to store 57 S&F rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoistedand fixed in position all as pacific SSR Part- I 58 S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoistedand fixed in position all as pacific SSR Part- I 59 S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms). 60 S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 61 S&F in repairvitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified 62 S&Fin repairs 15mm bore pillar tap cast copper allloy with capstan headChromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. 63 S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified. 64 S&F in repair15mmbore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms). 65 Taking down old 110/75mm borePVC(SWR) pipes in any position .complete all as specified and directed. 66 S&Fin repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed. 67 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches orall as specified and directed. 68 S&F 75 mm bore.PVC(SWR) junction single (single T)equal or unequal with access door.complete all as specified and directed. 69 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints fixed to wall all as specified and directed. 70 S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed. 71 S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed. 72 S&F 110 mm dia PVC (SWR) vent cowl. .complete all as specified and directed. 73 S&F 110 mm PVC (SWR) bend any radius.complete all as specified and directed. 74 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.complete all as specified and directed. 75 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed 76 S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 77 Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed 78 S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose with chromium plated nuts complete all as specified and directed. 79 S & F in Repair 10 ltrs capasityPVC valveless syphonic action typeflushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high densityor PVC 32 mm dia for low level cistern complete all as specified and as directed. 80 S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) 81 S&F (in repairs) angle cock cast copper alloy chromium plated fancy type screwed both end for iron pipe or or brass ferrulefor 15 mm bpre of pipe complete all as specified and as directed. 82 S&F (in repairs) Stop cock (Concealed)cast copper alloy chromium plated ,screwed both end for iron pipe or or brass ferrule with long shank and cupfor 15 mm bpre of pipe complete all as specified and as directed. 83 S&Fin repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified 84 S&F (in repairs) Bib taps cast copper alloychromium plated ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..
