|
| 1 | Disconnecting and taking downfans in any specification (wall/ exhaust / industrial air circulator etc) carefully for replacement of Unsv spares/ painting / re-location / open to body for re-winding incl removing toburn out winding cleaning prepairing for paintingetc and taking safe custody for re-fixing etc complete all as specified and directed. Note :(i) Quoted rate shall be included cost of transportation charge from site to workshop and back (if required). (ii)Required spares shall be measured against respective items. |
| 2 | M&L for re-fixing tofan in any specification repaired under above item No 1on given location with fixing accessoriesand making connection using three core flexiblecopper cable drawn through in PVC flexible conduit pipe incl cleaning oiling/ greasing/ replacing minor spares as condensor/ connecting cable / Top plug / rubber packing washer/ fan canopy / mouting clamp with nut bolt washer etc complete all as specified and directed. |
| 3 | M&L for painting to fan ( wall mouting/ exhaust / industrial air cerculator) body with sweep, stand etc all ,using shenthic enamel paint in two coats (one as finishing) over one coat red oxide primer spray by spray gun afterremoving/ scraping /cleaning toold fadded paint layers making smooth surface andSr No marking in different colour with std size of letter complete all as specified and directed.Note :Colour of paint shall be approved by Deptt. |
| 4 | M&L for re-winding to burn out winding of exhaust fan motor size of sweep upto 450 MM single phase electric driven heavyduty in any specificationusing super enamelled insulated copper wire with insulated material , varnishing, heating in existing qty, gauge, no of turns etc incl removing burn out winding repacement of bearing, packing, bushes nut bolt washer, re-assembling as same etcmaking serviceable complete all as specified and directed. |
| 5 | All as above but here -in- before wall mounting / air cerculator etcfan motor size of sweep above 450 to 650 MMcomplete all as specified and directed. |
| 6 | Supply and fixing in replacement spares parts as mentioned below sl No. (a) to (f) suitable for fan (ceiling/ wall/ exhaust / air cerculator /desrt cooler etc)) in any specification/ make /model etc in original manufacture complete.(a) Ball bearings No 6200 /6201/6202/6203/ 6204 incl greasing / packing etc complete. |
| 7 | (b) Heavy duty rubber seal/ packing washer in round shap. |
| 8 | (c)Bushes suitable as above |
| 9 | (d) Blade set for Ceiling fan 1200 mm with titing screw. |
| 10 | (e) PVC sweep/ blade set for wall mounting fan/ air circulator 450-650 mm with titing screw. |
| 11 | (f) GI\"U\" Clamp (set of two )with nut boltwashers and rubber packing with split pin etc complete. |
| 12 | Supply and fixing stepped in replacementstepped typefan regulator makeflush type and connecting up complete all as specified and directed. |
| 13 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades and depositing it at MES store for NA complete all as specified and directed. |
| 14 | Supply new ceiling fan in size 1200 MM sweepwhite colourBEE 5 star rated copper wound energy saving with set of sweep/ extension rod / \"U\" clampand other accessories single phase 50 HzsMin air delivery 210 CFM with service value 6.00 BEE and Brush less direct current motor (BLDC) incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe complete. Note: (i) quoted rate include marking MES no. on ceiling fan. (ii) Quoted rated shall be included the cost of GI clamp made out strip in size 32 x6 MM with nut bolts washer etc all. |
| 15 | Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 16 | Supply and fixing in replacement of wall mounting fan heavy duty 450 mm sweep non capacitor bracket mounted type copper wound motor ISI marked 4 star rated energy savingwith fixing accessories completemaking necessary electric connection complete all as specified and directed. Note ;Old fan shall be deposited by contractor in MES Yard. |
| 17 | Supply and fixing in replacement exhaust fan 450 mm sweep steel body heavy duty with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type incl making hole in brick wallplastering colour coading and all site requiredwork for disturbed surfacematching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed. |
| 18 | All as above item No 17 but here-in-abiveexhaust fan 300MM sweep heavy duty steel bodywith louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type complete all as specified and directed. |
| 19 | All as above item No 17 but here-in-abiveexhaust fan 300MM sweepplastic bodywith louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type complete all as specified and directed. |
| 20 | Supply & fixing in replacement to fan condensor/ capacitors in rating 2.5 to 3.5 MFD complete all as specified and directed. |
| 21 | Supply only PVC insulation tap in 25 mm width 25 Mtrs long suitable for upto 1.1 KV ISI marked complete all as specified and directed. |
| 22 | Supply and fix in replacement motor for Air curtain made out of MS/CRCA sheet of minium thickness 18 gauge finished with two coats of red oxide primer and final coats of synthetic enamel paint (oven baked) with MS -CRCA 18 gauge squareperforated suction grills , aluminium alloy fans and single phase electric motor nozzels etc complete with fittings and accessories so as to produce 1-1.5 M/sec air velocity at floor level for door opening in size 7 feet x 4 feet (52\" x 90\" ) complete all as specified and directed. |
| 23 | M&L for re-winding to burn out winding of air curtain unit motor for anysize of single phase/ three phase electric driven heavyduty in any specificationusing super enamelled insulated copper wire with insulated material , varnishing, heating in existing qty, gauge, no of turns etc incl removing burn out winding replacement of bearing ,packing, nut bolt washer, re-assembling as same etc making serviceable complete all as specified and directed. |
| 24 | Supply and fixing in replacementextension rod for ceiling fan made out by light grade galvanised water tube15 MM dia of bore in required length up to 1.5 Mtrs longincl cutting /making hole etcas site required complete all as specified and directed. |
| 25 | Supply and fixing temper proof energy meter in basic current rating 5 to 30 Ampsand maxium400 % , 220 volts single phase two wireconforming to STC with making all electric connection and mounting on teak wood board in suitable sizecomplete all as specified and directed.Note ;Old meter shall be deposited by contractor in MES Yard. |
| 26 | Supplying and fixing smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition complete all as specified and directed. |
| 27 | S&F in replacementLED bollard 10 watt with coverage of 360º lighting area and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and directed. |
| 28 | Taking down old unsv fitting and supply and fixing recess mounted LED downlight square/ round shape capacity 18 watt with PDC aluminium body and high transmittance diffuserand connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. |
| 29 | Supply and fixing low energy consumption 9W LED Inverter Bulb with 3 dimmable mode operation, 240Volts, 50Hz white light having brightness 900Lumen, with 4-10hrs power backup depending on different mode of operation complete all as specified and directed. |
| 30 | Supply and fixing in replacement LED inverter batten works on AC supply in Normal mode and DC supply in inverter mode ,with inbuilt battery back up of upto 4 hours with high efficiency and high lumen output complete all as specified and directed. |
