|
| 1 | M&L for preparation of old decorated plastered surfaces of wall including cornices etc. brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash, complete all as specified and directed. |
| 2 | All as per item No. 1.00 here-in-before but applying one coat of cement base paint on wall surfaces, complete all as specified and directed. |
| 3 | M&L for complete removal of existing treatment wall surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 4 | M&L for preparation of previously painted steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 5 | M&L for preparation of old plastered surfaces of wall, chajja, facia and similar work etc. and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour shade, complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 7 | M&Lfor preparation of newly plastered wall surfaces and applying three coats of white wash, complete all as specified and directed. |
| 8 | M&Lfor preparation of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed. |
| 9 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed. |
| 10 | M&L 15mm thick rendering in CM (1: 4) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L 10mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L 5mm thick rendering in CM (1:3) as in ceiling, chajja, soffits etc, finished surfaces fair and even, complete all as specified and directed. |
| 13 | M&L forpreparation of newly plastered wall surfaces and applying two coats of oil bound distemper over and including a coat of 2 to 3mm thick wall care putty and rubbing the surface with sand paper to obtain smooth surface, complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment on walls and applying two coats of acrylic distemper over a coat of primer over and including 2 to 3mm thick wall care putty, complete all as specified and directed. |
| 15 | M&L for complete removal of existing treatment of ceiling surfaces and applying two coats of oil bound distemper over and including a coat of chalk whitening primer, complete all as specified and directed. |
| 16 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and directed. |
| 17 | M&L for PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, complete all as specified and directed. |
| 18 | S&F mild steel works as in posts and struds in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc and similar work conforming to Fe.290 Gde E-165, complete all as specified and directed |
| 19 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut exc. 30cm long & dia of neck n. exc. 12mm, complete all as specified and directed. |
| 20 | S&F in repair concertina coil fencing with punched tape concertina coil 450-500mm dia, fixed on wall with existing angle iron\"Y\" shaped with horizontal reinforced barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing stud tied with GI staples and GI clipsto retain horizontal including necessary bolts or GI barbed wirw tied to angle iron, complete all as specified and directed.Note :- (i) Barbed wire shall be measured and paid seperately.(ii) Weight of concertina coil shall be measured through BOO. |
| 21 | S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and directed |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed. |
| 23 | M&L for joint free glazed ceramic coloured tilesof size350 x 250 x7mm / 450 x 300 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 24 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed |
| 25 | M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base for flooring etc., complete all as specified and directed. |
| 26 | M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick, light shade, (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 27 | M&L forjoint free non skid ceramic, white, tiles 7 to 8mm thick, (square/rectangular), polished, area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregate) as in hard standing/plinth protection, floor etc., complete all as specified and directed. |
| 29 | M& L chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors ver & including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 30 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed. |
| 31 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed. |
| 32 | Taking down shutter of any description exc. 1 Sqm but n.ex.c 2 Sqm each, complete all as specified and directed. |
| 33 | Taking down shutter of any description exc .1 Sqm & n.exc. 2 Sqm each and refixing in same opening, complete all as specified and directed. |
| 34 | M&L for windows with frame comprising of 3 track sliding window/ventilator made out of aluminium extruded section of bottom frame of weighing not less than 1.174 Kg/RM, top and side frame of weighing not less than 1.174 Kg/RM, the vertical styles of shutters of weighing not less than 0.423 Kg/Rm, top and bottom rail of shutters of weighing not less than 0.368 Kg/Rm, in two pannels and shutter with and including 5mm thick selected quality tinted glass & third one with and incl stainless steel wiremesh, including handles, cleat, glazing clip, special auto lock, dry set rubber gasket, complete all as specified and directed. |
| 35 | S&F factory made 100% solid WPC (wood polymer composite) door frame 125mm x 80mm double rebated mullein section made from wood polymer composite ( single extruded process) material comprising of virgin PVC polymer of \"K\" value 57-60 (suspension grade), calcium carbonate and natural fiber (wood powder/rice husk/wheat husk) and non toxic addictive fabricated with meter joint after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity (screw withdrawal strength of (min 990 N), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class A category with property of being termite/bore proof, water/moisture proof & fixed imposition with SS dash fasteners/hold fast of required dia and length, all as per specifications drawing, complete all as specified and directed.Note :- (i) Manufacturer\"s test certificate and authentication should be produced by the contractor from the manufacturing company.(ii) Hold fast or dash fasteners shall be paid separately. |
| 36 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed. |
| 37 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 38 | S&F MS holdfast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed. |
| 39 | S&F 30mmthick flush door, membrane doors, decorative finish, on one side and polished on other side all as per manufacturers instruction, as per tint/colour, including teak wood lippings, complete all as specified and directed. |
| 40 | S&F 30mmthick factory made glazed and skelton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cutand mitered beads for securing glass/guage etc, complete all as specified and directed. |
| 41 | S&F 100mm size mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 42 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 43 | S&F 75mm longbutt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21, complete all as specified and directed. |
| 44 | S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed. |
| 45 | S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer, complete all as specified and directed. |
| 47 | S&F in repair aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed. |
| 48 | S&F in repair aluminium mortice lock, vertical type, size 75mm (2 levers), complete all as specified and directed. |
| 49 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows and fixed with stainless steel wire staples, complete all as specified and directed. |
| 50 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 51 | S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 52 | S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed. |
| 53 | S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 81 kg and fixed, complete all as specified and directed. |
| 54 | S & F 5.5mm thick selected quality tinted sheet glass and glazing in square fixed with PVC/Neoprene gasket in aluminium frame work, complete all as specified and directed. |
| 55 | S&F in repair vitreous china squatting pan, ‘orissa’ pattern, size 630 x 450mm white, with integral foot rests, and lime concrete bedding etc. (excluding flushing cistern and flush pipe), complete all as specified and directed |
| 56 | S&F in repair vitreous china EWC (padestal pattern) white including seat and cover, flush pipe, \"P\" or \"S\" trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, CP hinges etc including making good distrubed surfaces, complete all as specified and as directed. |
| 57 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve, float and handle and connection to pipes, complete all as specified and directed. |
| 58 | S&F in repair vitreous china wash basin, ovel shape, pastel, flat back of size 580 x 450mm including PVC waste pipe 32mm bore, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed. |
| 59 | S&F PVC connection 15mm size of length 600mm with PTMT nuts, complete all as specified and directed. |
| 60 | S&F in repair of 32mm size PVC solid waste pipe forwash hand basin and sink, 800mm long, complete all as specified and directed. |
| 61 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 62 | S&F in repair 150mm size grating round of PTMT (Minimum weight -100 gms),complete all as specified and as directed. |
| 63 | Taking out old damaged tarfelt or membran of any description including screed bed or bedding layer and removing of debris to a distance exc. 100m and n. exc.250mand cleaning roof surfaces to remove all loose dust etc., roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water using wire brush, brooming down and applying the following treatment all as directed in order of precedence as stated:(a) Brushing neat cement slury with 3.0 kg of cement per Sqm.(b) 15mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compoundas per manufacturer instruction on existing roof surface true to level.(c) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.11 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions.(ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction.(iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017.(iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.(vi) The work shall be executed through authorised applicators of original manufacturer only.(viI) Cost of WPC shall deemed to be included in the unit quoted rate. |
| 64 | S & F in repair 75mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints including necessary nails, plugs and holder bats etc fixed to walls, complete all as specified and directed. |
| 65 | S & F in repair 110mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints including necessary nails, plugs and holder bats etc fixed to walls, complete all as specified and directed. |
| 66 | S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 67 | S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 68 | S&F rotational moulded polyethylene water storage tanks, (made 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed. |
| 69 | S&F rotational moulded polyethylene water storage tanks, (made 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed. |
| 70 | S&Fin repair 20mm boreball brass valves, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass and fixed, complete all as specified and directed. |
| 71 | Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 72 | M & L for brick work with flyash bricks, old size, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed. |
| 73 | M & L for brick work with flyash bricks, old size, straight or curved on plan any radius in half brick thick wall built in CM (1:4), complete all as specified and directed. |
| 74 | Demoliton of cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed. |
| 75 | M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and similar work, complete all as specified and directed. |
| 76 | S&F for 605 x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws, 60x 60cm in size, fixed with nails to timber framework or with staples on snap grid including dismantling of old unserviceable ceiling boards of any description, including cover fillets, complete all as specified and directed. |
| 77 | S&F expanded metal weight n. exc. 4kg per sqm, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed at a height of 12m from floor level complete to steel members, complete all as specified and directed. |
| 78 | M&L providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion (ATT chemical) @ 7.5 litre/Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding ,complete all as specified and directed. |
| 79 | M&L for post construction antitermite treatment at points of contact of wood work by chemical emulsion (ATT chemical) (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 80 | Cleaning and removing all scale and dirt etc, from tanks of capacity exc. 500 & n. exc. 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \"Tank Cleaned on dd/mm/yy\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed |
| 81 | Cleaning and removing all scale and dirt etc, from tanks of capacity exc. 250 & n. exc. 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \"Tank Cleaned on dd/mm/yy\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed |
| 82 | M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, heavy duty, including all conduit accessories with and including concealed pressed steel terminal box of suitable size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole including taking down old unserviceable point wiring of any type, size/description and from any position, complete all as specified and directed.. |
| 83 | All as per item No 82.00 here-in before but for 3 pin 5 Amp socket point on same board, complete all as specified and directed. |
| 84 | All as per item No 82.00 here-in before but for 3 pin 5 Amp socket point on independent board, complete all as specified and directed. |
| 85 | All as per ser item No. 82.00 here-in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed. |
| 86 | All as per item No 82.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 15 Amp 3 pin socket outlet point including PVC insulated 4.0 Sqmm FRLSHtype copper multi stranded conductor as earth wire, complete all as specified and directed. |
| 87 | S&F for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed. |
| 88 | S&F socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed. |
| 89 | S&F switch and socket combination2 in 1, 6 Ampflush type, complete all as specified and directed. |
| 90 | S&F switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed. |
| 91 | S&F ceiling rose surface PVC / Polycarbonate 50mm dia 3 terminals including PVC mounting block white/ivory finish, complete all as specified and directed. |
| 92 | S&F lamp holder, PVC / Polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed. |
| 93 | S&F electronic fan step regulator flush typeAC 230 volt suitable for any type of ceiling fan, complete all as specified and directed. |
| 94 | S&F bell push, flush type 5 Amp, complete all as specified and directed. |
| 95 | S&F bell electric, heavy duty, ding dong type, 230 volts single pole, complete all as specified and directed. |
| 96 | Supply and draw sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduitheavy duty and accessories of not less than 25mm dia ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 sqmm single core PVC insulated unsheathed copper earth continuity, including cutting chases and making good disturbed surface as per existing surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed.Note: (i)Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length. |
| 97 | M&L for sub main wiring with two run of 4 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of4 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed.(Note : Two runs of4 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping and its accessories shall be measured and paid as one length). |
| 98 | S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts,IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed. |
| 99 | S&Fsheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts,IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed. |
| 100 | S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts,IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed. |
| 101 | S&F MCB Triple Pole and Neutral (TPN) of capacity 40 to 63 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixedin proper position including connection and testing , complete all as specified and directed. |
| 102 | S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixedin proper position including connection and testing , complete all as specified and directed. |
| 103 | S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixedin proper position including connection and testing, complete all as specified and directed. |
| 104 | S & F LED light fitting 1 x 9W/10W bulkhead luminaires including LED light driver, holder, connecting up with and including three core flexible copper conductor cable of suitable size including taking down old unserviceable light fittings, complete all as specified and directed. |
| 105 | S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, ACwith driver, holder, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed. |
| 106 | S&F exhaust fan, metal body, AC, single phase, 230V of size 300mm sweep 900 RPMcomplete with louvers and shutter and mounted in suitable opening arrangement in wall and coonecting up including 3 core PVC insulated copper conductor flexible cable of suitable size from ceiling rose to fan including breaking of brick wall and making hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in CM (1:4) white washing matching with existing colour, completes all as specified and directed. |
| 107 | S&Fin replacement bldg security light fitting LED type, 35 watt made up of pressure diecast, aluminium housing, lens embeded PC cover having botton openable seperate driver compactment with IP-66 & IK 08, fixed to wall/ on pole including fixing arrangement with galvanized iron pipe 32mm bore, light grade, brackets, 1.2 mtr length, bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size, complete all as specified and directed |
| 108 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth and n. exc. 10 Sqm on plan, for foundation of pole/stay, or cable trenches etc and getting out in soft/loose soil, complete all as specified and directed. |
| 109 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 110 | Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 111 | Supply and laying double walled corrugated (DWC) HDPE duct pipe of 63mm outer dia conformingto IS, approved colour complete with fittings for cable protection, complete all as specified and directed. |
| 112 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core including taking down old unserviceable UG cable of any description, including taking down old unserviceable cable, complete all as specified and directed.Note :- Excavation and earth work shall be measured and paid seperately) |
| 113 | S&F in repair, plug top 15/16 Amp, 3 pin, 240 volt, complete all as specified and directed. |
| 114 | S&F capacitor for ceiling fan having capacity 2.5 mfd, oil filled, complete all as specified and as directed. |
| 115 | Note: An amount of Rs.33,582.00 on account of Credit Schedule for schedule \"A\" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 116 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
