Requirement Of Indure Make Spares For Ash Handling System Of U 5 And 6 (2X660mw), Csctpp, Rrvun, Chhabra. Requirement Of Indure Make Spares For Ash Handling System Of Unit 5 And 6 (2X660mw), Csctpp, Rrvun, Chhabra. , Spare For 150 Nb Dome Valve Assy. , Top Plate With Bolt , Dome With Shoulder Bolt , Pivot Shaft (Ss 304) , Seal Retaining Ring (Ss 306) (1 Set Of 2 Nos) , Drive Shaft , Small O-Ring , Large O-Ring , Shaft Seal (1 Set Of 4 Nos.) , V-Ring Seal (1 Set Of 2 Nos.) , Insert Ring (Ci Fg -260) , Self Lubrication Bearing (1 Set Of 2 Nos.) , Pneumatic Actuator , Inflatable Seal , Spare For 200 Nb Dome Valve Assy. , Top Plate With Bolt , Dome With Shoulder Bolt , Pivot Shaft (Ss 304) , Seal Retaining Ring (1 Set Of 2 Nos.) , Drive Shaft , Small O-Ring , Large O-Ring , Top Plate Gasket Set , Shaft Seal (1 Set Of 4 Nos.) , V-Ring Seal (1 Set Of 2 Nos.) , Spigot Piece , Insert Ring (Ci Fg -260) , Self Lubrication Bearing (1 Set Of 2 Nos.) , Pneumatic Actuator , Inflatable Seal , Spare For 300 Nb Dome Valve , Pivot Shaft , Seal Retaining Ring (1 Set Of 2 Nos.) , Drive Shaft , Small O-Ring , Large O-Ring , Shaft Seal (1 Set Of 4 Nos.) , V-Ring Seal (1 Set Of 2 Nos.) , Self Lubrication Bearing (1 Set Of 2 Nos.) , Pneumatic Actuator , Inflatable Seal , Esp Field Spares , Timer Card 18 Channel , Flow Pad For Flow Pad Assembly , Spares For 100 X 200 Nb Feeder Ejector , Throat , Mounting Plate , Nozzle Plate With Nozzle , Nozzle (1 Set Of 16 Nos.) , Hydro Mix Dust Conditioner Assembly No. A-435 , Blade Paddle , Blade Support , Shaft 100 Nb Pipe , Gland Follower , Nozzle , Front End Shaft Drive , Front End Shaft Driven , Rear End Shaft Drive , Rear End Shaft Driven , Main Support Plate , Gland Plate , Ash Slurry Disposal Pump A-918-321 Spares , Shaft Collar , Discharge Seal Ring , Liner Motor Side , Impeller Spacer , Liner Suction Side , Outer Shell Engine Side , Suction Seal Ring , Inner Shell Seal (1 Set Of 2 Nos.) , Inner Shell , Shaft Sleeve , Lantern Ring (1 Set Of 4 Nos.) , Gland Half (1 Set Of 4 Nos.) , Impeller Spacer , Stuffing Box , Pump Shaft Key , Pump Shaft , Labyrinth Lock Nut , Bearing Housing , End Cover (1 Set Of 2 Nos.) , Labyrinth (Drive End) , Shim Set (1 Set Of 2 Nos.) , Piston Ring (1 Set Of 4 Nos.) , Bearing Seal (1 Set Of 2 Nos.) , Labryrinth , 400 Nb X 250 Nb Flanged Reducer With Adaptor Coupling ( Ash Slurry Suction) , 400 Nb X 200 Nb Flanged Reducer With Adaptor Coupling ( Ash Slurry Discharge) , Ash Slurry Sump Isolation Plug Valve , Plug , Guide (Lower) , Guide (Upper) , Pinion , Bevel Gear , Valve Stem , Spares For 200 X 250 Nb Hydro Ejectorassembly , 200 X 250 Nb Hydro Ejectorassembly , Throat (216-012) , Throat Increaser (218-010) , Intermediate Wear Piece(216-013) , Inlet Piece (216-010) , Nozzle Inlet(216-011) , Nozzle Plate (216-302) , Throat Increaser (211X-012) , Nozzle Tip Ceramic Lined Ss-410 (216-301) , O-Ring (1 Set Of 5 Nos. ) , Coupling (200 Nb)(A-608-R) , Coupling(150 Nb)(A-606-R) , Ring Flange(216-015) , Half Flange (216-014) , Spares For 200 X 200 Nb Hydro Ejectorassembly , 200 X 200 Nb Hydro Ejectorassembly , Throat (216-012) , Throat Increaser (218-010) , Intermediate Wear Piece(216-013) , Inlet Piece (216-010) , Nozzle Inlet(216-011) , Nozzle Plate (216-302) , Nozzle Tip Ceramic Lined Ss-410 (216-301) , O-Ring (1 Set Of 5 Nos. ) , Coupling (150Nb) (A-606-R) , Ring Flange(216-015) , Half Flange (216-303)
