Years maintenance ,Repairs, Supply Of Pure Water Tankers And Other Necessary Items For Garden And Street Fountains In The City= 1 Cleaning ground Ivl/elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. Tank capacity up to 5,001 to 7000 litre. BDV 42.40-As directed by Engineer in charge. (SSR No.: 42.40) 2 Cleaning ground Ivl/ elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. v) Tank capacity upto 10,001 to 15,000 litre. BDV 42.42 As directed by Engineer in charge. (SSR No.: 42.42) 3 SUPPLY OF 5000 LTR CAPACITY PURE WATER WITH MAN FOR FILLING WATER IN CSMC LIMIT AS DIRECTED. [AS/LOWEST QUOTATION] (SSR No.:) 4 Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.61BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.61) 5 Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.63BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.63) 6 Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.65 BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.65) 7 Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.66 BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.66) 8 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 42.55- As directed by engineer-in-charge. (SSR No.: 42.55) 9 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.57BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.57) 10 Providing and fixing on walls/ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5 42.59BD.V S page 551 and as directed by Engineer 11 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. BDV 5 42.60 BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.60) 12 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. BDV 42.37 - As directed by Engineer in charge (SSRNo. 42.37) 13 Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. BDV 42.36-As directed by Engineer in charge.(SSR No.: 42.36) 14 P/F 15 MM STAINLEES STEEL BRASS NOZZELS WITH NECESSARY DRILLING, WELDING TO DOME FOUNTAIN ROUND PIPES AS DIRECTED BY ENGR IN CHARGE [AS PER SANCTION RATE OF 15 TH FINNANCE TENDER] 15 supplying and erecting LED Square/circular max.25Wdown lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having systern lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD <10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70850, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete 1.NO.2-1-6] (SSR No.:) with 3 years warranty. [SSR 16 Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately per specification No: WG-MA/CC. as [ele.ssr-1-1-7 2022-23] (SSR No.: 1-1-7) 17 Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVCinsulated wire laid In provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW [ELE.SSR 2022-23] (SSR No.: 1-3-1) 18 Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (SSR No.: 1-3-6) 19 Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (SSR No.: 1-3-7) 20 Supplying and erecting integrated LED flood light fitting Max. 50W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD 10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70850, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. (SSR No.: 2-4-13) 21 Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min, efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 50,000 Hrs. at L70850, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.(SSR No.: 2-1-2) 22 Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching ON and switching OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V/10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box.(SSR No.: 4-8-6) 23 Supplying and erecting four pole power contactor 430 V, 40 A for time switchcomplete erected on provided wooden block/box, with necessary materials.(SSR No.: 4-8-5) 24 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (SSR No.: 5-3-2) 25 Supplying, erecting & marking TPMCB 40A to 63A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (SSR No.: 5-3-11) 26 Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 KA (Ics 100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase. barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(SSR No.: 5-5-1) 27 Supplying erecting CRCA sheet metal enclosures of 1.2mm thickness with20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame.(SSR No.: 5-4-11) 28 Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.(SSR No.: 9-1-1) 29 Supplying & erecting Float sensor switch for water level controller workingon 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body.(SSR No.: 12-4-28) 30 Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 hp (SSR No.: 12-4-3) 31 Providing temporary illumination consisting of water proof HMI Par Light,4000 w, 230v, 50Hz, colour temp 6500k housing of pressure die cast aluminium alloy [multi colour] complete erected with mains, switchgears with continuous earth wire erected and dismantled with using scaffolding up to three days(SSR No.: 14-1-19) 32 Making trench in soft soll having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR (SSR No.: 16-1-1) 33 Rewinding of electric motor above 7.5 H.P. upto 10 H.P. three phase up to1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year (SSR No.: 18-1-12) 34 Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/S HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP 35 supplying and erecting minimum Three & above star rated submersible pump set of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 110 to 510 LPM discharge at 107 to 30 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP (SSR No.: 12-2-10) 36 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm/kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. BD) 31.09 As directed by Engineer in charge. (SSR No.: 31.09) 37 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black Amba White / Cat bary brown / RBI red /Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. BDM 3 33.35 Bd.M. 3 B/Page No. 380 (SSR No.: 33.35) 38 REPAIRS OF COMPRESSIOR, COILS, CONSOL BOX ETC FOR SIDDHRTH MUSICAL FOUNTAINS WITH NECESSARY ACCESSARY BY EXPERT TEAM AS DIRECTED BY ENGINEER IN CHARGE [JOB WORK] (SSR No.:) 39 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with Iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. BDW 46.39 - As directed by Engineer in charge. (SSR No.: 46.39)
