water supply scheme Pattan Town under AMRUT-2.0 including 05 years operation and maintenance- 1 Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 2 All kinds of soil: 1 meter from cutting edge 3 Ordinary Rock 4 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil: 5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 6 Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8328 7 150 mm dia Ductile Iron Class K - 7 Pipes 8 250 mm dia Ductile Iron Class K - 7 Pipes 9 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 10 150 mm dia pipes 11 250 mm dia pipes 12 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 13 80mm dia 14 Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523: Upto 600 mm dia. 15 Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm,conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job. 16 Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job. 17 150 mm dia 18 250 mm dia 19 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge. (All Kinds of Soil) 20 Extra forevery additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material: (All Kinds of Soil) 21 Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. 22 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mmnominal size) 23 Providing & Laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering, finishing and reinforcement. All works upto plinth level in 1:1.5:3 mix (1 Cement : 1.5 Sand : 3 Graded stone aggregates) 24 Providing & Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering,All works upto plinth level in 1:1.5:3 mix (1 Cement : 1.5 Sand : 3 Graded stone aggregates) 25 Providing & Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering,All works upto plinth level in 1:3:6 mix (1 Cement : 3 Sand : 6 Graded stone aggregates) 26 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and einforcement, including admixtures in ecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. 27 All works upto plinth level 28 All works above plinth level upto floor V level 29 Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) 30 Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein. 31 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 32 Reinforced cement concrete work in Beams, suspended floors, roofs having slope upto 15o, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor v level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 mix (1 Cement : 1.5 Sand : 3 Graded stone aggregates) 20mm nominal size Crushed. 33 Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 34 Reinforcement for RCC works including straightening , cutting, bending and placing in position all complete (TMT). (100 Kgs/cum) of RCC Items 35 Centering and shuttering including strutting, propping etc. and removal of form for: 36 Foundations, footings, bases of columns etc. for mass concrete. 37 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 38 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 39 Suspended floors, roofs, landings, balconies and access platforms. 40 Columns, pillars, piers, abutments, posts and struts. 41 Weather shades, Chajjas, corbels etc incl. edges 42 Edges of slabs and breaks in floors and walls under 20cm 43 Arches, domes, vaults upto 06m span 44 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured):Suspended floors, roofs, landings, beams and balconies (plan area to be measured) 45 Extra for shuttering in circular work (20% of respective centering and Shuttering items) 46 Foundations 47 Walls 48 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 49 Suspended floors, roofs, landings, balconies and access platforms. 50 Weather shades, Chajjas, corbels etc incl. edges 51 Domes 52 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 53 Extra for brick work with common burnt clay bricks/cement concrete bricks in 54 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge 55 Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil. 56 12mm thick cement plaster finished with a floating coat of neat cement of mix 1: 4 mix (1 cement : 4 fine Sand). 57 12mm thick cement plaster of mix 1: 4 mix (1 cement : 4 fine Sand). 58 12mm thick cement plaster of mix 1: 6 mix (1 cement : 6 fine Sand). 59 Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.(1 kg of water proofing material in 50 kg of cement) 60 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 61 150mm dia Class II 62 250mm dia Class II 63 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 64 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. 65 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 66 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete.Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 67 Finiishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 68 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 69 Provision for Submissionof Vetted Design/ Detailed CAD Drawings from DIQC/ NIT including Soil Testing and Mix-Dsign etc. Complete Job. 70 Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete 71 Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. 72 Welded 73 Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 74 1.00 mm thick with zinc coating not less than 275 gram/m2 75 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 76 Providing and fixing 1st quality ceramic glazed floor tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment of matching shadecomplete. 77 Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): 78 KD/ Silver wood 79 Providing and fixingglazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes incl ISI Marked pressed butt hinges bright finished of required size with necessary screws 80 KD/ Silver wood 81 Providing and fixing panelled glazed shutters for doors, windows and clerestory windows incl ISI marked MS pressed but hinges bright finished of required size with necessary screws, 35mm thick silver wood/ KD 82 Providing and fixing wire guaze shutters using galvanized MS wire guage of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows incl ISI marked MS pressed but hinges bright finished of required size with necessary screws, as per direction of incharge Engineer; KD/ Silver wood 83 P/F of Float glass panes on top of window3.5 mm thick incl all carriage upto site of work and beading etc as per req at site complete job 84 Providing and fixing of plain eves boarding of 2nd class kailwood 40mm thick and 300mm wide 85 Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 86 75x63x3.2 mm 87 100x63x3.2 mm 88 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 89 150x10 mm 90 200x10 mm 91 Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge 92 Anodized (AC 15) aluminum 93 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 94 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 95 50 x 12 mm 96 Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. 97 With stainless steel grade 304 wire gauge with wire of dia 0.50 mmWith 2nd class teak wood beading 62x19 mm 98 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good thewall etc. 99 PN-16 pipe , 32mm OD(SDR-7.4) 100 Providing & Installing uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 110 mm dia with all necessary arrangements & fittings including Tees, Elbows & End Caps wherever required complete job. 101 Providing and fixing brass bib cock of approved quality. 102 20 mm nominal bore 103 Providing and fixing brass stop cock of approved quality. 104 20 mm nominal bore 105 Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 liter low level white vitreous chinaflushing cistern and CP flush bend with fittings and C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: 106 W.C. pan with ISI marked white solid plastic seat and lid. 107 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever required 108 White Vitreous China Surgeon type wash basin size 660x460mm with a pair of 15 mm C.P. brass pillar taps with elbow includingoperated levers. 109 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete:Flexible pipe 110 32 mm dia 111 Providing & Fixing bottle trap for wah basin or sink. 112 Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings. 113 Providing & Installing 50 Ltr Geyser / Water Heater with all necessary arrangements complete Job 114 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever requiredKitchen sink with drain board 115 510x1040mm bowl depth 200mm 116 Road restoration:Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 117 Bituminous road. 118 Laying, spreading and compacting stone aggregate of specified sizes toWBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to propergrade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering andcompacting to the required density 119 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge 120 Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M. /W.M.M. @ 0.4 Kg/sqm. 121 Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. 122 Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With medium setting bitumen emulsion On bituminous surface @ 0.25 Kg/sqm 123 Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. 124 Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. 125 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking 126 Stone aggregate 40 mm nominal size and above avg lead upto 20 km 127 Stone aggregate 40 mm avg lead upto 20 km 128 CARRIAGE OF MATERIALS By Manual Labours including loading unloading and stacking for an avg lead of 500 mtrs 129 150mm dia DI K7 130 200mm dia DI K7 131 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking 132 Cement/ Steel upto an avg lead of 30 kms 133 Sand and Agg (20mm) for an avg lead of 30kms 134 Bricks for an avg lead of 50kms 135 40mm Agg for an avg lead of 30kms 136 P/f of 0.60mm in width soffit/ sheet (corrugated) for covering of gables, the job includes cost of 25mm dia angle iron support 137 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 138 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.GROUP B 139 Wiring for circuit/ submain wiring longwith earth wire with the following sizes of FRLS PVC nsulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 140 2X1.5sq.mm+ 1X 1.5 sq. mm earth wire 141 2X2.5sq.mm+ 1X 2.5 sq. mm earth wire 142 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 143 32mm 144 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 145 5/6 A switch 146 3 pin 5/6 A socket outle 147 15/16 A switch 148 6 pin 15/16 A socket outlet 149 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 150 Providing and fixing extra conduit down rod of 20 mm dia, 2 X 10 cm length, wiring with 2 X 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) 151 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required 152 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. 153 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450mm sweep 154 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 155 32 A TP&N 156 63 A TP&N 157 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 158 6 way , Double door 159 Providing and installing 8W round led ceiling light Complete Job 160 Providing and installing 200mm Exhaust Fan Cut out size 9.4x9.4 Square inches/ Watt 32/ 1350/ Air delivery 520 suitable for kitchen bathroom and office 161 Providing and installing Electric Ceiling Fan/ 1200mm BEE Star Rated Ceiling Fan 162 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/ m2 163 P/L of pre caste cement concrete rings incl. all carriage with cement concrete lids complete job 164 Operation and Maintenance period for 05 years 165 Year Ist 166 Year 2nd 167 Year 3rd 168 Year 4th 169 Year 5th
