Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #50792025

Tender For Repair Of Path Hard Standing Drain And Culverts Security Fencing Boundary Wall And Cleaning Maintenance Of Sewage Lines Manholes Septic Tank Including Sanitary Fittings And Other Connected Works In South Camp 4 Afsr Map Teacher Colony Tech

Issued by Statutory Bodies & Commissions/Committees · bamrauli, Uttar Pradesh
Tender Value
49 Lakhs
Estimated cost
Bid Submission
09 Sep 2025
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bamrauli → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Repair Of Path Hard Standing Drain And Culverts Security Fencing Boundary Wall And Cleaning Maintenance Of Sewage Lines Manholes Septic Tank Including Sanitary Fittings And Other Connected Works In South Camp 4 Afsr Map Teacher Colony Tech Area New P

BOQ

Name of Work:REPAIR OF PATH, HARD STANDING, DRAIN AND CULVERTS, SECURITY FENCING, BOUNDARY WALL AND CLEANING MAINTENANCE OF SEWAGE LINES MANHOLES SEPTIC TANK INCLUDING SANITARY FITTINGS AND OTHER CONNECTED WORKS IN SOUTH CAMP, 4 AFSR, MAP, TEACHER COLONY, TECH AREA, NEW PROJECT AND PERIODICAL SERVICES IN TECH AREA, PERIMETER WALL, GATE, SECURITY WALL AND CERTAIN MD/OTM ACCN AT AGE B/R-II UNDER GE (AF) BAMRAULI
Sl. No. Item Description
1Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.
2Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, Arches etc and removal of debrishes from site complete all as specified and directed.
3M&L for brick work with sub class ‘B’ bricksstraight or curved on plan exceeding 6m mean radious, built in cement mortar (1:6) complete all as specified and directed.
4All as per item No. 3 above but except bricks (Bricks shall be obtained from demolition. Rates for segregation of old bricks, stacking, cleaning etc. shall be included in this item.)
5M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:4), complete all as specified and directed.
6All as per Item No 5above but except bricks (using old serviceable bricks), complete all as specified and directed.
7Taking down cement plaster of any description including racking out joints, hacking for key, scrubbingdown with water etc and prepare to receive new plaster complete all as specified and directed.
8M&L for 15 mm thick rendering in CM (1:4)on external surface fair/other than fair faces of brick wall finished even and smooth without using extra cement etc complete all as specified and directed.
9M&L for 15 mm thick rendering in CM (1:4)on external surface fair/other than fair faces of brick wall /concrete surfacefinished even and smooth without using extra cement etc complete all as specified and directed with mixing of WPC @ 3% by weight of cement or as per manufacturers instruction.Note : WPC shall be measured and paid seperately as supply only under respective items of this Schedule
10Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
11M&L forNon Skid ceramic coloured tiles 300mmx300mmx 7 to 8 mm thick(square/ rectagular) joint free asin floors etc. setand jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade tile laid over and including 15mmthick screed bed layer in CM (1:6) etccomplete all as specified and directed.
12M&L for glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.(Premium quality).
13Supply only Integral waterproofing compound as per latest specifications,complete all as specified and directed.
14M&L for Keyed pointing in cement mortar (1:4) to brick wall of drains complete all as specified and directed.
15M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.
16M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain finished surface even & fair complete all as specified and directed.
17M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. (inner girth only measured)
18Add or deduct from item No. 17 for each 25mm girth or part thereof over or under 30cm inner girth (inner girth only measured).
19M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
20Dismantling of mild steel or structural steel work wrought iron, including doors, gates, but excluding framed truss and dismantling of CI work and removing complete all as specified and directed.
21S&F mild steel framed work such as grills, gratings etc with ends of bars shoulders or reveted, forged into spikes, framed guard bars, railings, ladders and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
22All as per ser item No 21 above but fixing only.
23Demolition ofreinforced cement concrete of any description and in any position as in ground foors complete all as specified and directed.
24M&L for reinforcement cement concrete pre-cast reinforcement cover slab (1:2:4) type B-1 using( 20 mm graded crushed stone aggregate) as in manhole cover of any size including RCC ring/Frame and MS frame set in CM(1:4) etc complete all as specified and directed.
25M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
26Dismantlingstone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.
27M&L for machine pressed precast concrete interlocking paver block of coloured rubber moulded glossy finish with Grey cement and pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed.
28M&L for machine pressed precast concrete interlocking paver block of colouredrubber moulded glossy finish with grey cement and pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed.
29Ditoo as per item No 28 above but fixing only. complete all as specified and directed.
30M&L for preparation of new concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed.
31M&L for preparing new plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed.
32M&L for preparing, plastered or unplastered of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
33De-silting and cleaning of existing rain water drain and removing the earth / sand / silt and shrub and other materials etc complete to a distance exc. 250 m but n. exc 500 mtr and depositing where directed at a level n. exc. 1.5 m above the starting point, complete all as specified and directed.
34Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
35S&F mild steel workas in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
36All as per item No 35 above but fixing only.
37M&L for two coats of synthetic enamel paint on new steel surfaces of any description over and including a coat of red oxide primer including preparation of steel surface complete all as specified and directed.
38M&L for preparation of old steel surfacses of any description and applying one coats of synthetic enamel paint etc complete all as specified and directed.
39S&F in repair of galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tyingat crossing with provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured), complete all as specified and directed.
40All as per item No 39 above but fixing only.
41S&F in repair of concertina coil 600mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wirerazor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fastener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed. (ii) Angle iron shall be measured paid separately underrespective item of schedule of works.
42S&F in repair of chain link mild steel galvanized fencing of mesh size 50mmx50mm and not less than 3mm dia hot dipped GI wire fixed and binding with GI wire complete all as specified and directed.
43M&L for cleaning and clearing of underground sewage line (including manholes by taking off manhole covers and re-fixing the same after cleaning) of any description underground any depth by removing any type of blockage including de-silting and de-chocking manually by providing rodding and flushing after cleaning including clearing of manholes and as directly by Engr-in-Charge, from the following size/bore of sewage lines :-
44(a) Upto 100mm bore pipe.
45(b) Upto 150mm bore pipe.
46(c) Upto 200mm bore pipe.
47(d) Upto 300mm bore pipe.
48M&L for cleaning of blockage manually by rodding, pumping etc and removing the deposited sludge/solid/liquid material, outside MOD land, complete allas specified anddirected from the following :-
49(a) Water Closet (Indian or European), P or S trap & CI pipe line upto first Manhole.
50(b) Floor/Nanhi trap, of Kitchen/Bathroom upto gully trap (excluding gully trap).
51(c)Gully trap upto first Manhole.
52Supply and fixing in replacement of non functional salt glazed stone ware pipe of 100mm bore grade \"A\" ISI Marked, 60 cm in length incl PCC 1:3:6, Type C-2 bed and haunching as required incl jointing with existing line, excavation in soft/loose soil and geeting out, returning, filling in and well ramming the soil and removal of surplus spoil to a distance n. exc 50 mtr and deposited where directed etc, complete all as specified and directed.
53All as per item No 45 above but bore of pipe 150mm, complete all as specified and directed.
54Excavation in soft/loose soil for getting out puncturing or existing damaged/broken or otherwise nonfunctional RCC drain pipe (one piece) 300mm bore and supply and fixing RCC drain pipe 300mm bore class NP-2 with collars etc, complete incl PCC 1:3:6, Type C-2 bed and haunching as required incl jointing with existing line, excavation in soft/loose soil and geeting out, returning, filling in and well ramming the soil and removal of surplus spoil to a distance n. exc 50 mtr and deposited where directed etc, complete all as specified and directed.
55Dewatering of septic tank and manholes any size and cleaning by taking out sludge from septic tanks and monholes of any depth, in foul conditions andconfined places, getting out and removing the sludge to a distance exc 250m and n. exc 500m and deposited where directed in and including borrow pits and covering the borrow pits with 20cms thick layer of soil complete all as specified and directed.
56S&F in repair of vitreous china squatting pan Orissa Pattern size 580x440mm white with integal foot rest (excluding flushing cistern and flush pipe) including connection to trap andflushing pipe complete including trap, set with cement concrete complete all as specified and directed.
57S&F in replacement of vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe)including plastic seat cover and making good the floor with adjacent floor finishing and makingconnection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n.exc 50m etc complete all as specified and directed.
58S&F in repair of vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed.
59M&L for plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceas in repair complete allas specified and directed.
60S&F in repair of 10 liter PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and 600 mm long PVC connection complete all as specified and directed.
61S&F in repair of vitrous china urinal, bowl type of size 410x355x265mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against walls in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal backin cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern,trap and waste pipe compete all as specified and directed
62M&L for cutting into existing manholes of internal dia 100mmfor connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.
63All as per item No 55 here-in before but internal dia of pipe 300mm, complete all as specified and directed.
64S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
65Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).
66M&L for 100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
67M&L for 75mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
68S&F in repair of 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured)etc complete all as specified and directed.
69S&F in repair of 75mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured)etc complete all as specified and directed.
70S&F in repair of 100mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.
71S&F in repair of 75mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.
72S&F PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
73S&F PVC (SWR) 110mm dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
74S&F 110mm bore PVC soil waste/Vent pipe in any length withor without ears with cement joints laid in trenches or in floors complete all as specified and directed. (Excavation and earth work shall be measured and Paid separately).
75All as per Item No 67 above but 75mm bore of pipes, complete all as specified and directed.
76S&F 75mm dia PVC(SWR) bends any radius complete all as specified and directed.
77S&F 110mm dia PVC(SWR) bends any radius complete all as specified and directed.
78S&F in repair of 75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed.
79S&F in repair of 110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed.
80M&L for repairs to sunken portion/floor including demolition of existing PCC,WC,P/S Trapand removing the material outside MD land and cleaning with the wire brush to dry and applyingone coat of URP incement in ratio 1:1 @ 1liter per Sqm. After drying of this process applyingtwo coats of pidifin2K @ 01 liter/Sqm for two coats and minimum time gap between each coat is 4 hours and 15 mm thick rendering in CM 1:4 including finished even & smooth without using extra cement complete all as specified and directed. Notes:- (a) Area of measurement will be floor area which includes side walls of the sunken portion (a) The pidifin2k chemical treatment shall be carried out by authorized technicians ofDr Fixit(b) 10 years written guarantee (from the certified date of completion of work) shall be obtained from the Dr Fixit and submitted by the contractor.
81M&L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed
82Excavating in trenches soft/loose soiln exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.
83Excavating in trenches soft/loose soil n. exc 1.5m wide and exc 1.5m in depth but n.exc 3 meter ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5m but n.exc 3m in depth and getting out complete all as specified and directed.
84Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
85Removing surplus excavated soil/earth to a distance not exc.50M and deposited where directed at a level not exc.1.5 M above the starting point.
86M&L for salt-glazed stoneware drain pipe grade \"A\" 150mm bore, ISI marked, jointe with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
87M&L for concrete bed(40mm graded crushed stone aggregate) to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using complete all as specified and directed.
88Cleaning of Septic tanks of 150 uesrs capacity by dewatering all the water, taking out the sludge/night soil, in order to remove all stacked mud/sludge etc., cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as specified and directed.
89Clearing the urinal blockage of any length and dia by roding and removing the materials (sludge) to a distance not exceeding 500m complete all as specified and directed.
90Clearing of WC blockages up to 1st manholeof any length and dia by roding and removing the materials (sludge) to a distance not exceeding 500m complete all as specified and directed.
91Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as required complete all as specified and directed.
92All as per item ser No 84 above but internal dia of pipe 200mm complete all as specified and directed.
93S&F 150x150mm cast iron gully traps, square or round mouthed, type \"P\" including demolition of old/damaged gully trap complete all as specified and directed.
94M&L for TMT bars 8mm dia cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
95M&L for pre-cast cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate) as in cover slabs including necessary from work etc, set in CM 1:6 complete all as specified and directetd (form work shall be included in quoted rates),(reinforcemntbe measured and paid seperately)
96M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) of 75mm thick as in Path / PCC floor,finished even and fair including demolishing old cement complete all as specified and directed.
97M&L for PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate), 100mm thick, as in hard standing finished even and smooth without using extra cement including demolishing old concrete complete all as specified and directed.
98M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection including making 10mm thickjoints filledwith bituminous & sandmixture (1:7) not exec 3.00 mt intervals, corners andfinished even and smooth without using extra cement including demolishing old concrete complete all as specified and directed.
99Cleaning of Rain Water pipes and removing the materials (sludge) to a distance n exc 50m, complete all as specified and directed.
100Complete removal of trees/plants growth on bldg\"s roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs up to the roots and removing the material (Branches and plants ) to a distance n exc 50Mtr complete all as specified and directed.Note : Work to be carried out up 15mtr height of thebldg.
101Cleaning of non accesible Roof/ roof sheeting ,sorrounding area mud, tree leaves etc including water outgoing holes at any height of bldg, removing the materials (sludge) to a distance n exc 50m, complete all as specified and directed.
102Removal of excavated soil to adistance exc250 m & n.exc 5 Km and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.
103M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
104Excavating in post holes (or similar holes) each not exc0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in hard/dense soil, complete all as specified and directed.
105M&L for PCC 1:3:6 Type c2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed by the Engr-in-Charge.
106Demolition of PCC in ground floor & pavings n.exc 15 cm thickness below or above GL, complete all as specified and directed.
107M&L for hardcore of guage exc 63mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
108M&L for sand filling under floor including watering and consolidating complete all as specified and directed.
109M&L for rubber moulded coloured chequered cement concrete tiles 22-25 mm thick of any shape and size not less than 0.09 sqm in each tile, set and jointed, pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed in cement mortar (1:6) complete all as specified and directed.
110S&F rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails &guides for sliding doors, fixed with angle cleats or other connectin plates coomplete all as specified and directed.
111S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
112Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers and completely removing silt, soil, mud sludge, vegetation growth etc and removing the same to out side MoD land all as directed by Engr-in-Charge for any width of drains and depth exc. 1.00 Mtr but n.exc. 2.0 Mtr complete all as specified and directed.
113Dismantling of PVC pipe of any dia with fitting complete all as specified and directed.
114S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealted with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.
115S&F PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cemnt complete all as specified and directed.
116S&F 150mm dia PVC (SWR) bends complete all as specified and directed.
117Fixed only chain link fencing including line wires, any mesh, sice and tupe to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and directed.
118Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed.
119M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.
120M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.
121M&L for applying three coats of white wash on ceiling incl preparation of new plastered surfaces usingcomplete all as specified and directetd.
122M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over 1.5 mm thick wall care putty using complete all as specified and directed.
123M&L for preparation of old decorated surface of wall incl cornice etc and applying one coat ofoil bound distemper in any colourcomplete all as specified and directed.
124All as per item No 116above but two coats of oil bound distemper in any colour on wall complete all as specified and directed.
125M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care puttycomplete all as specified and directed.
126All as per item No 118 above but on ceiling complete all as specified and directed.
127M&L for preparation of old treated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed.
128All as per item No 120 above but on steel surface complete all as specified and directed.
129M&L for brooming down plastered/unplastered old decorated surface of walls and applying one coat of cement base paintcomplete all as specified and directed.
130M&L for brooming down plastered/unplastered old decorated surface of walls and applying two coat of cement base paintcomplete all as specified and directed.
131M&L for preparation of old decorated concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
132M&L for preparation of old treated wooden surface of any description over 10 cm width or girth and applying one coat of synthetic varnish using Mechanical means complete all as specified and directed.
133M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent saltand treating oil and greasy spots and applying one coat ofweather proof paint (Exterior emulsion paint)complete all as specified and directed.
134M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1.5 mm thick putty, complete all as specified and directed.
135M&L for preparation of old surfaces of wall projection,face of chajja,projected face of roof slab and face and sides of sunshade etc by brooming down or steel wire brushing, scrapping down any type applying one coat of exterior emulsion paint complete all as specified and directed.
136M&L for preparing old decorated plastered or unplastered surfaces of walls, wall projection, face of chajja, projected face of roof slab and face and sides of sunshade etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent saltand treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) in camouflage pattern Using Mechanical means (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed.
137All as per item No 129 above but two coat fo weather proof paint(Exterior emulsion paint) in camouflage pattern over onecoat wall putty of minimum 1.5 mm thick using Mechanical means (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed.complete all as specified and directed.
138M&L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.
139M&L for preparation of old treated steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint in camouflage pattern complete all as specified and directed.
140Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.
141S&F of 12 mm thick plain toughened glass in doors/ windows framing doors handle, suitable hinges, rubber beading, floor spiring and all necessary fittings complete Including dismantling of old glass any type complete all as specified and directed.Make- 1 Saint Gobin 2 Asahi 3 Atul Glass Industries 4 Golden Fish 5 Modi Guard 6 Hindustan Pilkington Glas.
142M&L for 4.0 mm thick sheet glass tinted colour frostedordinary quality and glazing with oil puttycomplete all as specified & directed.
143M&L for servicing and making functional of steel sliding shutter of hanger any size with oiling / greasing also replacement of worm out component with new component, complete all as sppecified and directed by Engr-in-Charge. Note : (a) This item shall be doneon quaterly basis or as directed by JE/AGE.(b) Supply of new components shall be measured and paid seperately.
144Supply only the following New component required for smooth functioning of shutter as mentioned.
145(a) Supply only MS/cast iron required as per requirement of replace to existing which are clause.at site eg pin, nut bolt, crank, wheel/ spandle locking arrangement complete including necessary welding complete all as specified and directed.
146(b)Supply only bearing big exc 75 mm dia and not exc 150 mm dia size shape as per existing sample complete all as specified and directed.
147(c) Supply only bearing small upto 75 mm dia of size as per existing sample complete all as specified and directed.
148M&L for preparing newplaster,brick or conc surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of floor coat emulsion paint over a coat priming paints plastercomplete all as specified and directed.
149Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

AI Tender Summary

OUR REF NO 50792025
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 09-09-2025
Authority
Authority Name Military Engineer Services
Work Description Repair Of Path Hard Standing Drain And Culverts Security Fencing Boundary Wall And Cleaning Maintenance Of Sewage Lines Manholes Septic Tank Including Sanitary Fittings And Other Connected Works In South Camp 4 Afsr Map Teacher Colony Tech Area New P
Basic Detail
Tender No 8976/E8
Bidding Type Tender
Location
City bamrauli
State Uttar Pradesh
Key Dates
Publish Date 21 Aug 2025
Submission Date 09 Sep 2025
Open Date 11 Sep 2025
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
56164c3c-df7d-4095-ba0e-51aa360e5d77.html
BOQ_813823.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 21, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 09, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 11, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

56164c3c-df7d-4095-ba0e-51aa360e5d77.html

xls

BOQ_813823.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders