|
| 1 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (DAR-2.1.1) |
| 2 | Providing and laying cement concrete 1:6:12( 1 cement : 6 find sand : 12 graded brick aggregate 40 mm nominal size) Including supply of all material, labour, T&P, curing, cost of formwork complete in all respect in foundation and under floors. (S.I. No.273) |
| 3 | M-150 class brick work in 1:6 cement and course sand of 2.25 fineness modules mortor in foundation and plinth including supply of all materials, labour and tools and plants etc .complete in all respect required for proper completion of the work & as per direction of Engineer-in-charge. (S.I.No. 305 b) |
| 4 | First Class brick work in 1:4 cement and coarse sand mortor in super structure including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 11/2 brick thick including suply of all material labour amd T&P etc.required for proper completion of work. (SI 309(3)) |
| 5 | Class M-150 brick work in 1:4 cement and coarse sand of 2.25 FM in super structure in half brick thick wall including supply of all materials, labour and tools and plants etc. required for proper completion of the work.(SI No.303+309+310) |
| 6 | First Class brick work in 1:4 cement and coarse sand mortor in super structure including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 11/2 brick thick including suply of all material labour amd T&P etc.required for proper completion of work. (SI 309(3)) Excluding cost of bricks. |
| 7 | Filling of cartage earth in trenches or in under floor in layer not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering etc. complete. |
| 8 | Sand filling in plinth and under floors including watering, ramming, consolidating and dressing complete including supply of all materials, labour and T&P etc. required for proper completion of work. . ((SI NO255+ Mat.sl no 19) |
| 9 | P/L of Plain cement concrete with cement, approved coarse sand and 2cm (3/4\") gauge approved stone grit in the proportion of 1:2:4including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . (SI NO 279 .b) |
| 10 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone grit in the proportion 1:2:4 (1 cement: 2 coarse sand: 4 aggregate) in raft excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG binding wire andnecessary centering and shuttering etc. and also including supply of all materials labour and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150 as per direction of Engineer-in-charge.(S.I,.No.287+475.00diff of 40 mm&20 mm ) |
| 11 | Same as above item No. (4) but R.C.C. work 1:2:4 in lintel of doors and windows.(SI No.283) |
| 12 | R.C.C work with cement, approved coarse sand and 20mm gauge approved graded stone grit in the proportion of 1:2:4 in slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials ,labour and T & P etc. required for proper completion of work.(SI NO 284) |
| 13 | Cost cement concrete work 1:2:4 in bed block with 1 cement 2 coarse sand and 4 stone grit 20 mm gauge..... complete work. (SI.No. 282) |
| 14 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\") gauge approved stone grit in the proportion 1:2:4 (1 cement: 2 coarse sand: 4 aggregate) in beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG binding wire andnecessary centering and shuttering etc. and also including supply of all materials labour and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150 as per direction of Engineer-in-charge.(S.I,.No.285) |
| 15 | Same as above item No. (4) but R.C.C. T-Beam slab in 1:2:4 (SI No.288) |
| 16 | R.C.C. work with cement, approved coarse sand and 2cm (3/4\") gauge approved stone grit in the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . (SI NO 289) |
| 17 | \"Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ run ways, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer DSR 16.43.2 |
| 18 | Mild steel or iron in plain work such as reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for 8proper completion of work, supply of steel, its wastage, bend, hooks and authorized overlapping shall be measured up to floor two level for proper completion of work. (S.I.No. 504) |
| 19 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods gratings etc. (When not included in an overall rates) wrought to required form including supply of steel and its wastage including cost of bolts nuts if required for and welding grinding and making holes as required for proper completion of work. (S.I.No. 502) |
| 20 | Mild steel or iron work in heavy size such as trusses build up gates record racks roof work gates etc. wrought to required form including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work. (S.I.No. 503) |
| 21 | Same as above item No. 17 but Fabrication of Z section windows operable including necessary steel fittings. (SI.No. 502(D)) |
| 22 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.10.5.2 Using flats 30x6mm for diagonal braces and central cross piece |
| 23 | Supply and fixing of Barbed wireincluding supply of all materials labour and T&P etc. required for proper completion of the work. |
| 24 | Supply and fixing of R.S.J. ISMB 200 X 100 MM wrought to required form including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work. (S.I.No. 503) |
| 25 | Supply and fixing tubulor trusses including carting upto site and welding in required shape and also including supply of pipes, bolts, nuts etc. and their fixing required for proper completion of the work. (SI.No. 503) |
| 26 | Providing and fixing precoated galvanised iron profile sheets(32 mm depth, covered width of 1006 mm Total width 1090 mm, 251 mm pitch with two stiffening ribs & anti capillary flute) 0.50 mm (+0.05 %) total coated thickness with zink coating 120 grams per sqm as per IS:177,in 240 mpa steel grade,5-7 microns primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protected gaurd film of 25 microns minimum to avoid scratches during transportating and should be supplied in single length upto 12 meter or as directed by Engineer in charge. The sheet shall be fixed using self drilling/ self taping screws of size (5.5x55 mm)with EPDM seal,complete upto any pitch in horizontal /vertical or covered surfaces,excluding the cost of purlins.rafters and including cutting to size and shape wherever required .(DSR No.12.50) |
| 27 | Providing and fixing precoated galvanised steel sheets roofing Ridges Plain (500-600 mm)0.50 mm (+0.05 %) total coated thickness with zink coating 120 grams per sqm as per IS:177,in 240 mpa steel grade,5-7 microns primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling/ self taping screws complete.(DSR No.12.51.1) |
| 28 | Supply and fixing rolling shutter of approved make made of 80x1.25 mm (3\"x18 gauge) cold rolled MS lath interlocked throughout their entire length and joined together at the end by end locks and material on specially designed pipe shaft with bracket side guides and arrangement for inside and cut side licking with push and pull operation complete including cost of Providing and fixing 27.50 cm long wire spring grade-II and 1.25 mm thickTop cover. (DAR 10.6.1) |
| 29 | Providing and fixing ball bearing for rolling shutter. (S.I. 523) |
| 30 | 12 mm thick plaster with cement mortarin proportion of1:4 cement and course sand of 2.25 F.M. .(SI 584+C/Sand difference) |
| 31 | Add for extra labour and material for plaster over rough face of one brick thick wall. (SI NO 596 ) |
| 32 | Same as above item No. 7 but 06 mm thick cement plaster in ceiling with 1:3 cement fine sand & mortar(DSR 13.6.1) |
| 33 | Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. (Hardoi-598) |
| 34 | Making drip course in sunshade or FACIA as per direction as Engineer-In-Charge including supply of all material, labour etc. required for proper completion of work. (Chapter_13_Item_15) |
| 35 | 40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) laid over 15 cm thick base concrete 1:6:12 (1 cement : 6 fine sand : 12 graded brick aggregate 40 mm nominal size) and finished with floating coat of neat cement including fixing of glass strips. (Excluding cost of glass strips) (SI No. 665+273) |
| 36 | Same as above item. No. 32 but 40 mm thick C.C. floor without base concrete . (SI No. 665-14.71) |
| 37 | Same as above item No. 30 but 2.5 cm thick floor with 08 cm base concrete. |
| 38 | Providing and fixing glass strips 5.5 mm thick and 35 mm depth in joints of floors.(SlNo.631b ) |
| 39 | 20 mm cement plaster in dado and skirting 1:2consisting of one part of cement and 2 part of approved course sand laid in pannels,finished with3 mm floating coat of neat cement or cement andmarble dust in ratio 5:1 including supply of all materials, labour and T&P etc. required for proper completion of work(DSR NO.13.9.2) |
| 40 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 120 mm thick cement mortar 1:3 (1 Cement : 3 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (Chapter_13_Item_8) |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DAR 11.37.A |
| 42 | Providing and laying Vitrified tiles in floor without lean concrete of 600x600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with 20 mm thick base 1 :3 (cement and course sand) based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. (Chapter_13_Item_13) |
| 43 | Providing and fixing 1st quality Vitrifiedfloor tiles (size 600x600 mm) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.11.49.2 |
| 44 | Providing and laying brick bat coba water proofing treatment with minimum thickness of 75mm at Khurra and minimum top slope of 1 in 80 over the existing cleaned R.C.C. roof slab spread with acrylic polymer cement slurry (mixed with acrylic polymer water proofing compounds) laid over the prepared surface a layer of 100mm thick (minimum-ave.) brick bat coba laid over the mortar layer to get required gradient for adequate drainage. The voids between brick bats are to be kept between 15mm to 20mm wide. These joint are to be filled with acrylic cement, finished with 20mm thick acrylic cement mortar 1:4 (1 cement: 4 coarse sand) including giving guarantee of 10 years. Written guarantee on stamp paper testing etc. all complete as per specification, drawing and instructions of engineer-in-charge. |
| 45 | Supply and fixing of 10 cm dia internal P.V.C. down pipes complete with rose heads, bends, M.S. clamps 2.5x3mm fixed to walls by 15 cm long 6 mm dia nail sand including repair of plaster pointing etc. if damaged during fixing of the pipes including cost of fail material labours tools and plant etc. required for proper completion of work. (NS) |
| 46 | Supply and fixing 15 mm dia M S Clamp hexagonal box type fan hook with 12mm dia round bar complete with all materials labour and T&P etc. required for proper completion of work. |
| 47 | Supply and fixing of 6 mm thick A.C. sheet in joints of C.C. floor... |
| 48 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per (Cost of aluminium snap beading shall be paid in basicitem): ii) With float glass panes of 5.5 mm thickness (10.30.2) |
| 49 | Supply and fixing of panes of glass with Atul or equivalent I.S.I. marked quality putty brads and spring complete.thickness 50 mm. thick. (S.I.No. 812A) |
| 50 | White washing three coats inner side of toilets to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter on new surface. (NBO 18.11+18.130 |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over & including water thinnable priming coat with cement primer including cost of all materials labour T&P etc. required for proper completion of work.(Chapter_15_Item_7) |
| 52 | Finishing walls with water proof cement paint of approved quality such as super snowcem durocem super quality of required shade two Coats on undecorated wall surface to give an even shade after throughout brushing the surface to remove all dist and remains of loose powdered material including curring and cost of all materials labour, T&P etc. complete.(S I 660) |
| 53 | Finishing walls with Putty approved brand andmanufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. (Chapter_15_Item_27Agra 2020) |
| 54 | Finishing wall with acrylic smooth exterior water proof paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ( ace Adv. walmasta) Asian, berger coat of sandtax matt weather coat of approved quality with priming coat on new surface with this paint dirt and remains of loose powdered materials including curring and cost of all materials. (SI 13.46.1) |
| 55 | Painting two coat over primer coat on steel and other metals surface brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matters sand papering and scraping including cost of all materials, labor and T&P etc. for proper completion of the work.ISI 641+642) Yr 2020 |
| 56 | Painting new iron work in small areas or new wood work with one coat of ready mixed primer paint and two coat of approved superior quality ready mixed paint or varnish and a final coat with valspar or other approved high grade enamel paint superior synthelic clear varnish, including supply of all material, labour and T&P etc. required for proper completion of the work paint to be used should confirm to ISI No. 103-1950 paint and shade will be approved by the E/I. (SI No. 641+642) |
| 57 | Painting two coats over priming coat on new steel or wood surface including priming coat with superior syntheic enamel such as Berger, Asian, Neroluc LUXOL 3,Hi-gloss apcolite superlac, DULUX specified burshing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labour tools and plants etc. required for proper completion of the work. (S.I. No.641+642) |
| 58 | Providing and fixing 15 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 16 mm nominal outer dia Pipes(Chapter_20_Item_2A) |
| 59 | Providing and fixing 20 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes (18.8.2) |
| 60 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (Chapter- 23_Item_16) |
| 61 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (Chapter_23_Item_54) |
| 62 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Chapter- (Chapter_23_Item_14) |
| 63 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.(17.1+17.18) |
| 64 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid(Chapter_19_Item_18) |
| 65 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single of 15 mm C. P. brasspillar taps ( Chapter_19_Item_5) |
| 66 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre PVC. automatic flushing cistern(Chapter_19_Item_2A) |
| 67 | Supply and fixing of 100 mm nihani trap PVC completed inall respect as per directed LMR |
| 68 | Providing of fixing toilet paper holder 17.34.1 CP brass LMR |
| 69 | Supply and fixing 10 cm. dia C.P jali complete in all respect as per directed LMR |
| 70 | Providing and fixing of C.P. brass towel rail 750x20mm together with pair of C.P. brass brackets to fit the towel rail. (Chapter_ 22 _Item _32) |
| 71 | Supply and fixing of soap dish complete in all respect as per direted LMR (138x120x75)mm (7509-2021mat) |
| 72 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm (Chapter_ 24 _Item _23b) |
| 73 | Construction masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 for stop cock, with C.I surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete etc complection of the work E/I S.I. No. DSR 18.32 |
| 74 | Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (c ) For 1000 litres. (Chapter_19_Item_2C |
| 75 | Dismentalling on brick work or stone work in lime or cement mortar and inclduging stacking material as directed byEngineer-in-charge with in a distaance of 60 Meters.(SI : 692)Lakhimpur |
| 76 | Dismantling of Brick onedge pavement.including stacking of servieable materials and disposal of unservieable materials with in distance of 50 m as directed by E/I(N.S.) Lakhimpur |
| 77 | Relaying of Brick onedge pavement.with old bricksincludingpreparing base and supply of all materials, labour and T&P et. required for proper completion of work.(labour only Lko mord 412) |
| 78 | Construction of embankment in ordianry soil with approved material obtained from available land as permitted and approved by Engineer-in-charge and as per Technical Speciation clause 301.3.4.1 with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 as per Technical Specification clause 301.5 |
| 79 | Providing , laying ,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-0100 kN static roller in stages to proper grade and camber, applying and brooming , crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 1as per Technical Specification Clause 405 |
| 80 | Providing , laying ,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-0100 kN static roller in stages to proper grade and camber, applying and brooming , crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2as per Technical Specification Clause 405 |
| 81 | Supply and laying of Factory made 80 mm thick Interlocking cement concrete tiles (30 mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles,levelling and dressing of surface to required level and slope,filling joints with fine sand including the cost of materialslabour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.[Chapter 20 Item no.1] |
| 82 | P/L of Plain cement concrete with cement, approved coarse sand and 2cm (3/4\") gauge approved stone grit in the proportion of 1:2:4including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . (SI NO 279 .b) |
| 83 | Maintenance cost of 1st year @ 0% cost of work on item No.75 to 82 |
| 84 | Maintenance cost of 2ndyear @0.25% cost of work on item No.75 to 82 |
| 85 | Maintenance cost of 3rd year @0.50% cost of work on item No.75 to 82 |
| 86 | Maintenance cost of 4th year @0.75% cost of work on item No.75 to 82 |
| 87 | Maintenance cost of 5th year @1.00% cost of work on item No.75 to 82 |
