|
| 1 | B/R PORTION |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish of the premises complete. |
| 3 | M&L 25mm PCC 1:2:4 Type B-0 (Using 12:5mm stone agg) as in sub basefloor , complete all as directed and specified . |
| 4 | M&Lcoloured/printed non skid ceramic tiles 7 mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of450x300x7mm / 350x 250x 7 mm / 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | M&L for 18-20mm thick granite stone (slab) of any colour/type,(table rubbed and polished) work as infloors/ vertical surfaces, cooking platforms and like, set in neat cementincluding pointing in white cementwith admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed. |
| 7 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations. |
| 8 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. |
| 9 | M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 11 | Taking down(Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion completeall as specified and directed. |
| 12 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colourPVC sheet reinforced with MS Square tube supply and fixing as specification and drawing. |
| 13 | S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat mouldedand wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing. |
| 14 | S&F 125 mm long stainless steel butt hinges medium weight with stainless steel screw complete. |
| 15 | S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete. |
| 16 | S&F Aluminium alloy anodised barrel towerbolts of extruded section 150 mm long and fixed complete. |
| 17 | S&F factory made steel box type ventilator having box type frame and shutters including MS grill of 10mm sq bar welded with FI frame and 4.8mm thick double glazing securing with 10mm MS hollow section with rubber gasket and all connected accessories complete all as specified.Note:- Glazing and fly proofing shall be measured and paid for separately against relevant items of this schedule. |
| 18 | S&F for4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads/ MS square tube in square panes notexc 0.50 sqm each fixed with steel frame work complete all as specified and directed. |
| 19 | S & F stainless steelwire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. |
| 20 | Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 grade, all as specified and directed. |
| 21 | Dismantling wall and ceilingboards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thicknessincludinggrid work/aluminium frame work, cover fillets complete all as specified. |
| 22 | S&F 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber/steel frame work fixed in ceiling complete all as specified and directed. |
| 23 | M&L for preparing of new or previous untreated steel surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc andapplying two coat of synthetic enamel paint completeall as specified and directed. |
| 24 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 25 | M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed. |
| 26 | Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified. |
| 27 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. |
| 28 | M&L for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6as per manufacturer\"s instruction, finished fair and even without using extracement complete all as specified and directed. |
| 29 | M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cementcomplete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately. |
| 30 | M&L for rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished Even and Smooth without using extra Cement complete specified. |
| 31 | Supply only integral water proofing compoundall as directed. |
| 32 | M&L preparation of newly plastered wall surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturer\"s instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. |
| 33 | M&L for preparation of newly plastered ceiling surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturer\"s instruction on new surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. |
| 34 | M&L preparation of old plastered ceiling surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturer\"s instruction on old surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. |
| 35 | Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 36 | M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm graded aggregate) complete all specified and directed. |
| 37 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed. |
| 38 | Formwork to sides and soffits of floor orslab, roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc |
| 39 | S&F in repair PVC flushing cistern 10 ltr capacity white with all internal fittings including brackets PVC connection 45cm long including nut and PVC washer at both ends including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed. |
| 40 | S&F in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover andchromium plated jet including PVC connection, fixed complete including demolition of old unserviceable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed. |
| 41 | S&F in repair Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed. |
| 42 | S & F Vitreous china wash hand basin coloured, flat back type of size 550mm x 400mm including waste pipe & plug, porcelain stopper, 32mm dia PVC waste pipe with CP brass coupling and set of bracket complete all as specified and directed. |
| 43 | S&F Vitreous china wash basin, white, table top, size 135x420x420 including 32mm dia PVC waste pipe with CP brass coupling fixed in repairs complete all as specified and as directed. |
| 44 | S&F in repair Vitreous China urinals of minimum size 580x380x350 mm, crystal white, HALF STALL URINAL, with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, trap, grating and Union for discharge pipe. (Including fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed. |
| 45 | S & F in repairs Stainless Steel Wall Mount Case with Soap Dish & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge . |
| 46 | S&FCP health faucet of 1.25Mtr long CP flexible tube with necessary fittings complete all as specified and directed. |
| 47 | Taking up or down 15 mm dia steel tubing in wall, ceiling or floor and connections, including cleaning for refixing or removal to storeetc complete. |
| 48 | All as item No. 47 above but 20 mm dia of pipe. |
| 49 | S&F 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 50 | All as per item No.49 above but bore of pipe 20mm dia pipe. |
| 51 | Cutting chases, pinning for concealed water tubing andmaking good to facing where required and pointing in cement mortar 1:3 ,cutting exc 10cm but n.exc 20cm girth all as specified and as directed. |
| 52 | S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 53 | S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long betweenflanges with chromium plated bracket and fixed all as directed. |
| 54 | S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water storage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed. |
| 55 | S&F 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water storage tanks of capacity 500 litres capacitycomplete all as specified and directed. |
| 56 | S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 57 | S&F 2000mm x 600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 58 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 59 | S&F in repair 15mm dia 450mmlong PVC connection with brass nut and washer complete all as specified and directed. |
| 60 | S&F in repair 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete. |
| 61 | S&F in repair stop valve/angle valve, fancy type, chromium plated, cast copper alloy screwed down, high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed. all as specified & directed. |
| 62 | S & F in repairs two way Angle valve 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions. |
| 63 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwed down for15 mm GI bore pipe complete all as specified and directed. |
| 64 | S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed. |
| 65 | Supply and fixingin repairShower Rosebrass chromium plated 125mm size with armsuitable for 15mm dia pipe all as specified and as directed. |
| 66 | Dismantling ofPVC drain pipes, jointed in cement mortar and taking out of renches, if required complete all as specified and directed. |
| 67 | S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 69 | PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 70 | PVC (SWR) 110mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 71 | PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 72 | PVC (SWR) 110mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 73 | PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. |
| 74 | PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. |
| 75 | S & F PVC (SWR) vent cowl, size of bore 75mm |
| 76 | S&F in repairs CP grating round suitable for 110 mm dia and connecting up, fixed in repairs. |
| 77 | M&L PVC (SWR) floor trap 110 mm dia including jointing with solvent cement complete. |
| 78 | M&L PVC (SWR) Gully trap 125/110 mm setting and jointing with solvent cement complete. |
| 79 | M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring including finishing even and smooth without using extra cement complete all as specified and directed. |
| 80 | Supply only Fine aggregate (sand) for sand cushioning |
| 81 | M & Lfor Chequered cement concrete tiles 30cm x30cm x 25mm thick with grey cement and no pigments , set, jointed and pointed in neat cement slurry in floors over 20 mm screed bed in cement mortar 1:6 chequared tiles complete all as specified and directed. |
| 82 | Excavating in trenches, n. exc 1.50m wide and n. exc 1.50min depth; for foundation, etc. or for shafts, wells, sewage line, cesspits, manholes, pier holes, etc. n. exc 10 Sqm on plan and getting out in any type of soil etc complete all as specified and directed. |
| 83 | M&L for Concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in plain cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate, complete all as specified and as directed. |
| 84 | Supply and fixing for double wall corrugated HDPE non pressure pipe suitable for sewage/ waste etc of size DN/ID 150mm, dim 195mm and wall thick e4 min-1.5mm and e5 min-1.00mm all as per IS16098 (part-2), including jointing rings and necessary machinery to joint the sewers in-situ in trenches, including preparation of internal surfacecomplete all as specified and directed .Note:- Excavation and earth work including return filling shall be measured and paid separately. |
| 85 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed. |
| 86 | Removing of excavated material (soil) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre high from the starting point, complete all as specified and as directed. |
| 87 | Cutting into existing manholes for connecting new drains 150mm dia, making good to pipes and rendering, cutting out existing benching for and forming channel (1/2 round or 3/4 section) in plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate, finishing surfaces and reforming benching as required, complete all as specified and as directed. |
| 88 | E/M PORTION |
| 89 | Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified. |
| 90 | M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cableunsheathed as earth continuity cable including concealed pressed steel GI terminal boxes of suitable way with 3 mm thicklaminated sheed cover for mounting of switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a)One light /fan/ point controlled by one nos, one way 5/6 Amps switch. |
| 91 | (b)All as per srl item No 2.00 here-in-before but using One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch. |
| 92 | (c) All as per srl item No 2.00 here-in-before but usingOne 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch. |
| 93 | All as per srl item No 2.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 2.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch complete all as specified. |
| 94 | S&F in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified. |
| 95 | S&F in replacement of piano type socket outlet flush type, 3 pin 2-in-1, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. |
| 96 | S&F in replacement of piano type switch socket combination flush type, 2-in-1 3 pin, 6/16 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. |
| 97 | S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/ bakelite, isolated body 230 volts AC, 50 Hz complete all as specified. |
| 98 | S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and including casing caping ISI marked of suitable size and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. |
| 99 | S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 1.5 sqmm complete drawn in and including casing caping ISI marked of suitable size and its accessories along with 1x 1.5 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. |
| 100 | S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. |
| 101 | S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 240 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified. |
| 102 | S&F in replacement of sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SP 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified. |
| 103 | S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified. |
| 104 | S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified. |
| 105 | S&F in replacementLED tube light fitting 1x20/ 22 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells/Phillips/Wipro |
| 106 | S&F in replacement of LED bulk head light fittings weather proof, anti corrosion wall/ceiling mounted opel colour decorative, round shape/ oval shaped with PC cover suitable for & including 10 watts LED lamp, lamp holders complete with all accessories all as specified. |
| 107 | S&F in replacement of LED tube light fitting, box type 230 volts AC suitable for & including 9/10 watts LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make- Havells/Phillips/Wipro |
| 108 | M&L for taking down existing Exhaust fanand submitted toE/Msubdivision with all the connected accessories, all as per direction of engr-in-charge. |
| 109 | Supply and fix electric water heater, Horizontal storage type steel body with copper inner tank and 2 KW heating elementcapacity 50 litre, BEE 4 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed. Make-Bajaj/ Racold/ Havells/ Crompton |
| 110 | M&L for taking down existing Geyser of any capacityand submitted toE/Msubdivision with all the connected accessories, all as per direction of engr-in-charge. |
| 111 | Supply and fixing of exhaust fan 230 mm sweep 220 V, single phase 50 Hz metallic body 4 blades along with bird repellers including cutting chases/glass and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener. Complete all as specified and as directed. Note- Work includes making hole in wall and making good disturbed surface using cement mortar. Make- Ventil AirDB Havells/ or equivalent in Hindware/Bajaj/Crompton |
| 112 | M&L for fixing of steel louvers with aluminium flaps self opening type of size suitable to accommodate exhaust fan of suitable size for fixing on wall along with gitties and screws. Complete all as specified and as directed. |
| 113 | S&F in replacement LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed |
| 114 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified. |
| 115 | Note:-An amount of Rs. 28,412.00 on account of credit schedule for Sch \"A\" Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. |
