|
| 1 | P/ITC of factory assembled floor mounted type totally closed Control pannel/outdoor type feeder piller,double door made 2 mm CRCA sheet duly primed & painted (with tapered drip roof top) for S/Pump set having 100 Amps04 nos insulated aluminium bus bars, R-Y-B LED indicators,40 mm x 40 mm x 5 mm MS angle, 600 mm long pedestal and hinged door of same material shall be provided on the front, with neccessary handle ,sealing matrial, gasket shall be provded on door complete i/c earth studs, paintings and installation with cement concrete foundations (1:3:6) 30 cm below ground level 30 cmabove the ground level i/c finishing etc as reqd.(Minimum Size of feeder pillar is 600 mm x 500 mm x 300 mm) I/c one Nos three phase star -delta starter for 15 HP Pump Make-Hevells,L&T,1 Nos VAF + PF meter,1 nos 100 A, 4 pole isolator.make-Havells) ,arrangement for incoming / outgoing cabling / cable termination, earthing stud, locking, interconnection etc. as required.as per direction of engineer in charge. |
| 2 | Supplying, installation, testing & commissioning of 15 HP/11 KW three phase, 415 volts, 50 Hz Horizontal openwell Submersible pump set in existing sump, delivery 100 mm x 100 mm, discharge 38-15 LPS, 16-36 mtr head range including,suitable size all fittings in all respect, including GI Nippals/fittings,8 mm diaround steelflexible PVC coated wire ropewith bottom clamp for holding the pump set and , connection etc.complete as required as per direction of engineer-in charge pump type of make Crompton/ Kirloskar/ Duke/ taximo. |
| 3 | Supplying, installation, testing & commissioning of 5 HP/3.7 KW three phase, 415 volts, 50 Hz Horizontal openwell Submersible pump set in existing sump, delivery 80 mm x 65 mm, discharge 10-14 LPS, 18-24 mtr head range including,suitable size all fittings in all respect, including GI Nippals/fittings,8 mm diaround steelflexible PVC coated wire ropewith bottom clamp for holding the pump set and ,DOL three phase starter suitable for 5 HP motor including connection etc.complete as required as per direction of engineer-in charge of make Crompton/ Kirloskar/ Duke/ taximo.. |
| 4 | Supplying & Laying one number PVC Insulated and PVC sheathed / XLPE Power cable of 1.1 KV grade of following size Al armoured cable direct in ground including excavation, refilling the trench etc as required, but excluding sand cushioning and protective covering. make-Havells/Polycab(I) 3.5X35 SQ MM. |
| 5 | Supplying & fixing of 3 x 4 sqmm flat submersible cable (standard insulation) including connection etc. as required |
| 6 | Earthingwith G.I. earth pipe4.5mtr long x 40mm dia including accessories and providing masonary enclosure with cover platehaving locking arrangement and watering pipe etc. withcharcoalor coke and salt complete as required. |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required |
