Construction Of Ms Gunesthang At New Site- 1 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. 2 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. ORDINARY ROCKS 3 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. HARD ROCK ( BLASTING PROHIBITED) 4 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.ALL KINDS OF SOIL 5 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. ORDINARY ROCKS 6 Providing laying of dry stone soling (any thickness) on horizontal level including cost of stone. 7 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) : 8 Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with. Cement mortar 1:6 (1 Cement : 6 coarse sand). 9 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 11 Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. 12 Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.. 13 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. 14 Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide 15 Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) 16 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) 17 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 18 Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete. 19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including priming coat with cement primer 20 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood 21 Providingandfixingglazedshuttersfordoors,windowsandclerestorywindows using4mmthickfloatglasspanes, includingISImarkedM.S.pressedbutthinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood35 mm thick 22 Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windows andclerestorywindows fixingwithbutthingesof requiredsizewithnecessary screws,excludingpanellingwhichwillbepaidforseparately,allcompleteasper directionofEngineer-in-charge.(Note:-Butthingesandnecessaryscrewsshallbe paid separately) 23 Providing and fixing of wooden panelling of 12mm plywood with TNG 4 vide including polishing complete job 24 providing and fixing of laminated readymade wooden flooring 8mm thick action tessa AC4 including fixing in position complete job 25 Providing & fixing false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595x595 mm of approvedtexture, design and patterns having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on inter-lockingmetal T-Grid of hot dipped galvanised iron section of 0.33mm thick(galvanized @ 120 grams per sqm including both sides) comprising ofmain-T runners of size 15x32 mm of length 3000 mm, cross - T of size15x32 mm of length 1200 mm and secondary intermediate cross-T ofsize 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameterM-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mmlength and L-shape level adjuster of size 85x25x2 mm. Galvanised ironperimeter wall angle of size 24x24x0.40 mm of length 3000 mm to befixed on periphery wall / partition with the help of plastic rawl plugs at450 mm center to center and 40 mm long dry wall wood screws. Thework shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG.false ceiling tiles. 26 Carriage of Cement and steel by an average lead of 190 kms by MT 27 Carriage of Sand and Stone aggregate by an avg lead of 15 kms by MT 28 Carriage of stone by an average lead of 10 kms by MT 29 Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge,complete with; 2nd class kail wood 30 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 32 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 33 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 34 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 35 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 36 providing and fixing flow trap of pvc 37 Providing and fixing soil, waste and vent pipes 100 MM 38 Providing and fixing soil, waste and vent pipes 75 mm 39 Providing and fixing plain bend of required degree. 100 mm dia pvc 40 Providing and fixing plain bend of required degree. 75 mm dia pvc 41 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,25MM 42 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,32MM 43 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 44 Providing and fixing of pipe with heat wire 25x13mm nitrile insulation pipe, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of engineer in- charge. 45 Providing and fixing of insulation for water storage tank with 25mm nitrile sheet, rock wool, GI insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of engineer in- charge. 46 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 gms. 47 Providing and fixing C.P Jalli 48 Providing and fixing C.P Brass angle valve for basin, mixer and geyser. 49 42Providing and fixing C.P Brass close hole basin mixer piller tape of approved quality and make 15mm nominal bore of Standard back type. 50 Wiring for light point, 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required. 51 Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in existingrecessed PVC conduit including sheet as required. 52 Supplying and fixing 0f 1’’ 3/4 pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required. 53 Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.. 54 Supply and fixing of combined 3 pin 240 volt 20 amp. Socket outlet with safety shutter and 20 amp. 240 volt single pole mounted in recessed including complete MS box complete as required. 55 Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutters and 10amp 240 volt single pole mounted in recessed including m.s box complete as required 56 Supplying and fixing following size/ modules GI box along with modular base and cover plate for modular switches in recess etc.as required: 3 modular 57 Supplying and fixing following size/ modules GI box along with modular base and cover plate for modular switches in recess etc.as required: 6 modular 58 Supplying and fixing following size/ modules GI box along with modular base and cover plate for modular switches in recess etc.as required: 12 modular 59 Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp 60 Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. B) Double pole 63 Amp 61 Wiring for change over 63 amp. And installation with complete accessories and hole on the wall as required 62 Supply and fixing the followinglight fixtures including all accessories like electronic ballasts coms etc, complete as required concealed / tube lightning 20 watt 3000k, round led luminaries as per Philips 63 Providing and fixing of ceiling fan of approved brand : philips, Crompton, Havels etc and making good the surface ,Complete job 64 Supply of 1100volt grade aluminium conductor KPLE insulated pvc sheath arranged complete as per specification as required 25 sqmm 65 Supply and fixing of following single pole and netural sheet steel MCB distribution box 240 volts on surface recess complete with tinned busbarnetural link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 12 way double door SPN 66 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 gradedstone aggregate 40 mm nominal size derived from natural sources) 67 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size) 68 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including Primer , Hot finished welded type tubes 69 Providing and laying 60mm thick faciory made cement in required colour andpattern over and including 50mm thick compacted bed of coarse sand, filling theconcrete interlocking paver block of M -30 grade made by block making machinewith strong vibratory compaction, of approved size, design & shape, laid jointswith line sand etc. all complete as per the direction of Engineer-in-charge. 70 Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) 71 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 gradedstone aggregate 40 mm nominal size derived from natural sources)
