Tender For Repair And Maintenance Work Painting Work For Municipal Middle School Perumalpet In Ward No 34 At Vaniyambadi Municipality
Tender Value
6 Lakhs
Estimated cost
Bid Submission
22 Aug 2025
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vaniyambadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Work Painting Work For Municipal Middle School Perumalpet In Ward No 34 At Vaniyambadi Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 2 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete. |
| 3 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 5 | Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 6 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 7 | White washing one coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed |
| 8 | Painting one coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 9 | Painting Black Boardwith Painting of Black Oxide of first quality and of approved colourincluding preparing the surface, clean removal of dirt and including necessary wherever required etc., complete complying with standard specification. |
| 10 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 11 | Supply and fixing of4\"-18WLED tube with fitting inclusive of all charges |
| 12 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch (two way) with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (SD 18) |
| 13 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated CU conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box inflush with wall and covered with hylum sheet of 3mm thick with 5A 3pin non inter locking CS Plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plugpoint SD 10 |
| 14 | Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete .SD 129 |
| 15 | Supply and fixing offitting inclusive of all chargesas per standard specification as directed by the departmentaol officers etc., complete-5Amps Switch |
| 16 | 15Amps Socket |
| 17 | Supply and fixing of 1200 mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (SD 112) |
| 18 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Provision for Art Painting for Compound Wallincluding cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. |
| 20 | Supplyingand fixing of Water Supply fittings as per standard specification as directed by the departmentaol officers etc., complete-25mm PVC Pipe |
| 21 | 25mm PVC Bend |
| 22 | 25mm PVC Tee |
| 23 | 90mm PVC Pipe |
| 24 | 90mm PVC Bend |
| 25 | 90mm PVC Tee |
| 26 | Waste Not Tap-Pn:40 |
| 27 | 25mm UPVC Pipe |
| 28 | 7/20 Aluminium Wire-Pn:204 |
AI Tender Summary
Tender Timeline
Aug 21, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender