Tender For Repairs To Certain Roads At Technical And Domestic Areas At Af Station Under Ge Avadi
Tender Value
73 Lakhs
Estimated cost
Bid Submission
03 Sep 2025
0 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Certain Roads At Technical And Domestic Areas At Af Station Under Ge Avadi
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairsto potholes any depth, not exceeding 1 Sqm each including sweeping ,free from dust and mudor water, scoring sunken surfaces in roads, paths, etc. by cutting around edges to at least 25mm in depth, making goodby applying tack coat of paving bitumen of grade VG-30 at 5 Kg per 10 Sqm, putting and filling pot holes withpremixed bitumen mix as specified for SDAC ,(including supply of SDAC) depth of potholes not exceeding 30mm complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for preparing existing black top surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with mechanical blower or air Compresorto remove all loose dirt etc.complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for applying evenly a priming / tack coat with bituminous primer of paving bitumen of grade VG-30 at the rate of 5 kg per 10 sqm over bituminous surfaceby using pressure sprayer machine complete all as specifiedand as directed |
| 4 | M&L for Bituminous premixed semi dense asphaltic concrete (SDAC) by using Hot mix plant ,40 mm consolidated thickness with 5.5 %binder content in weight of total mix (Paving bitumen VG-30) and filler of cement content as per design mix (not less than 2%) spread by using mechanical paver, rolled and consolidated to required camber and gradientcomplete to a uniform surface by using Tandom Vibrator power roller 8 to 12 tonne capacitycomplete all as specified and directed by Engineer-in-Charge |
| 5 | Note : (a) Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus sideadopted. (b) SDAC shall be as per MORTH specification(c) Laying shall be done by means of self-propelled mechanical paver,finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing.(d) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only (e) The job mix shall be designed from the Government Engineering Colleges ,Wing of CME Pune and Highways Research Station / IIT Chennai only, job mix formula shall be approved by GE before incorporation. (f) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account. |
| 6 | (g) Contractor quoted rate shall be for5.5% binder content .If the binder content shall be less than5.5% by weight of total mix ,price adjustment shall be made for less bitumenat the rate of Rs 55/kg .However no price adjustment ifthe binder content shall be more than as specified and no other claim whatsoever on this account shall be allowed and admissible |
| 7 | M&L for providing and applying 2.5 mm thick road marking (Retro reflective) centre line, strips, stop lines, arrows etcexceeding 10 cmin widthof specified shade or colour by using hard thermo plastic material applying on road surface by using fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operatorincluding preparing and cleaning the road surface of all dirt,seals, oil, grease and foreign material etc.complete allas per Manufacturers specifications / instruction complete all as specified and directed by Engineer-in-Charge and in accordance with the manufacturer\"s specifications. |
| 8 | S&FCATEye Solar reflective type of double side metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA strip lens reflectors of model no. DA 972.0 or equivalent make approved by GE fixed with and including MS Stud of suitable sizes as per Manufacturers instructions and as directed. |
| 9 | M&L for demolition of cement concrete of any description (unreinforced) in ground, floors and pavings not exceeding 15 cm thickness (below or above ground level) including removing off debries complete all as specified. |
| 10 | M&L for plain cement concrete 1:4:8type D2using 40mm graded stone aggregate as in flooring complete all as specified and directed. |
| 11 | M&L for plain cement concrete 1:2:4, type B0 (using 12.50 mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates coping including weathering, slightly rounded or chamfered angles and throating including formwork complete all specified and directed. |
| 12 | M&L for Chequered cement concrete colouredtiles, machine pressed of size 25cm x 25cm x 22mm thick with grey cement and pigments, set ,jointedin neat cement slurry and pointed with coloured cement to match with colour of tile, laid over and including 15mm thick screed bed in cement mortar 1:4 completeall specified and directed. |
| 13 | M&L for 60 mm thick machine pressed rubber mouldedprecast concrete interlocking paver block factory Manufactured (ISI marked) and any shape and size confirming to ISI 15658-2006 of M-35 graded,with grey cement andwithout pigment as in floor, payment etc complete all as specified and directed. |
| 14 | M&L for sand filling under floor, sand cushioning including watering and consolidation, complete all as specified and directed |
AI Tender Summary
Tender Timeline
Aug 20, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender