Tender For Spl Repair Of Security Fencing, Mw And Rw At Mil Stn Sgnr; 1 Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. 2 Dismantling Posts or struts (wood, steel or RCC) any section ,including taking out embedded portion and making good disturbed ground post embedded in concrete complete all as specifed and directed. 3 M&L PCC 1:3:6, Type C2 using40mm graded stone aggregate as filling in post hole / mass filling complete all as specifed and directed. 4 M&L PCC 1:2:4 (40mm graded stone aggregate) type B2, as in foundation of posts and struts complete all as specifed and directed. 5 M&L mild steel work i.e. Angle iron/flat ironas in post and struts (Angle Size upto & above65x65x6 & FI 40x6 mm)in fencing includingcutting tops to shape, drilling holes, notching for wire etcconforming toFe-290 grade E-165 complete all as specifed and directed. 6 M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps, bases, splices, all lattice bars, cutting tops to shape drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specifed and directed. 7 M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St. 240 complete all as specifed and directed. 8 S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel seet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specifed and directed. 9 S&F Pre-painted galvatume aluminium zinc coating GI based plain steel seet 0.50mm thick for Ridge of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specifed and directed. 10 M&L Preparation of new steel primed surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specifed and directed. 11 S&F10mm dia MS round bar for fixing of chain link fencing with post complete all as specifed and directed. 12 M&L Preparation of new steel primed surfaces of any description, n exc10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specifed and directed. 13 Dismantling of fencing wire mesh of any type and size complete all as specifed and directed. 14 Supply only chain link fencing galvanised mild steel hot dipped (IS-2721) of 4 mm dia of mesh size 100x100 mm complete all as specifed and directed. 15 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wirecomplete all as specifed and directed. 16 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10mm complete all as specifed and directed. 17 S&F for Rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 grade E-165 complete all as specifed and directed. 18 S & F flat iron strip for supporting chain link fencing complete all as specifed and directed. 19 Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specifed and directed. 20 M&L brickwork with sub class `B Bricks, straight or curved on plan exc 6m meanradius, built in CM 1:6complete all as specifed and directed. 21 M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finishedfair and even w/o using extra cement complete all as specifed and directed. 22 M&L twocoat of cement base paint to new surfaces of wallsincluding preparation of surfaces complete all as specifed and directed. 23 Taking down unserviceable MS steel Gate/Door of any description, type and size by straightening stiles/ rails and welding hinges/hold fasts and joints includingand refixing after making serviceable/ functional complete in all respects all as directed complete all as specified. complete all as specifed and directed.Note : Rates are included in reinforcement/emp of JCB or Crane and operator to dismantle/taking down the MS Gate/Door, welding works/demolition of reinforced cement concrete column/pillarsetc. 24 M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as specifed and directed. 25 M&L for surface excavation n exc 30cm deep and averaging 15cm deep and getting out complete all as specifed and directed. 26 Removal of excavated material soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specifed and directed. 27 Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified complete all as specifed and directed. 28 M&L for hardcore of broken bricks gauge exc 63 mm not exc 100 mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to true surface complete all as specifed and directed. 29 M&L 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base of floor, filling and mass concrete complete all as specifed and directed. 30 M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specifed and directed. 31 M & L granite (of any type)work16 to 20 mm thick(table rubbedand polished) in cooking platforms gate pillars and like in cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all as specifed and directed. 32 M&L Colured30 cm x 30 cm x 1 cm thickNon skid (Hi Traffic grip tiles)set jointed and pointed in neat cement slurry in floors over 20 mm of screed bed in CM 1:4 including coping at edges in PCC Type B1 (1:2:4) complete all as specifed and directed. 33 M&L precast machine pressed rubber moulded coloured concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, set, jointed & pointed in neat cement slurry in floor/ pavings/ path etc with grey cement and pigment including 25mm thick sand cushioning complete all as specifed and directed. 34 M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match complete all as specifed and directed. 35 Fixing only hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR including drain pipe 3 mtr complete all specified and directed. 36 Supply and fix Voltage stablizer for qutomatic operation, 5 KVA single phase naturally air cooled indoor type and disigned for input variation between 160V - 270V with outdoor voltage stabilized at 230v upto 15 amp and above capacity for compatibel devices and output stabilised voltage 230 volt upto 15 amp and above capacity complete all specified and directed. 37 S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steeldia 25mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and coversincluding necessary connections, PVCflexible pipes are used in pannel board while connecting the cable complete all as specified and directed. 38 S & Fsub-main two single core cables PVC insulated and un-sheathed 4 sqmm FRLSH including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 4.0 sqmm copper conductor single core wire conected by common earth al as specified including 20mm dia concealed PVC conduit, medium grade, ISI marked complete all as specified and directed.Note : Two lengths of 4.00 sqmm cable and one length of 4.0 sqmm earth cable along with PVC conduit will be measured as one running length. 39 S&F Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed. 40 S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in -Charge. 41 S & FMCB ‘C’ series type suitable for 240 volts,10 KA,AC supply SPN 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. 42 S & FMCB ‘B’ series type suitable for 240 volts,10 KA,AC supply 6 to 32 single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
