Tender For Repair To Water Proofing Treatment, Galvanised Sheeting And Other Connected Repairs In The Area Of Age B/R H/L Under Ge Deolali
Tender Value
1.10 Crore
Estimated cost
Bid Submission
17 Sep 2025
0 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
deolali → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Water Proofing Treatment, Galvanised Sheeting And Other Connected Repairs In The Area Of Age B/R H/L Under Ge Deolali As Per Tender Documents
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 2 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC (1:2:4 ) using 20 mm graded stone aggregate/ brick work CM (1:4) and plastering the surfaces with CM (1:4) on both side where required cost of the same shall be deemed to be included in quoted rate completeall as specified and directed. |
| 3 | M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with Fixed with L-type orJ-type or crankedhook bolts type bolts or cranked hook bolts etc complete all as specified and directed. |
| 4 | All as per Item No. 3 above, except for sheets. Complete all as specified and as directed by the Engineer-in-Charge |
| 5 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and directed. |
| 6 | Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc completeall as specified and as directed |
| 7 | Dismantling battens for tiles of any size spaced exc. 15cm of any description of any size incl tilting fillets, single if any complete all as specifiedand directed. |
| 8 | Dismantling timber scantlings 40 sq.cm and over in section, in any position from unframed work as in roof members complete all as specified and as directed. |
| 9 | S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. |
| 10 | M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 11 | Dismantling water tank of capacity exc 500 ltr andnot exc 1000 ltr capacity of anytype i.e. PVC/RCC/MS complete all as specified and directed. |
| 12 | Dismantling water tank of capacity exc 250 ltr andnot exc 500 ltr capacity of anytype i.e. PVC/RCC/MS complete all as specified and directed. |
| 13 | S&F rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20 mm bore complete all as specified and directed. |
| 14 | S&Frotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed. |
| 15 | Fixing only PVC water tank of capacity 1000 Ltrs and ball valve complete all specified and directed. |
| 16 | Fixing only PVC water tank of capacity 500 Ltrs and ball valve complete all specified and directed. |
| 17 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 18 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 19 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 20 | Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. |
| 21 | Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. |
| 22 | Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. |
| 23 | S&F15mm bore galvanised steel tubes, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 24 | S&F20mm bore galvanised steel tubes, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 25 | S&F25mm bore galvanised steel tubes, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 26 | S&F in repair 25mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 27 | S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 28 | S&F in repair 15mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 29 | Taking down carefully existingunserviceable bitumen felt/ APP membrane including demolition of cementplaster/PCC padding (any number of layers ofanythickness of cement plaster or PCC padding ) including demolition of PCC padding etc and removing of the rubbish to a distance not exceeding500m from the building and depositing complete all as specified anddirected. |
| 30 | M & L for 10mm thick rendering in cement mortar (1:3) on roof slab top and sides, finished even and smooth without using extra cement, mixed with waterproofing compound at the rate of 200 ml per 50 kg of cement, complete all as specified and as directed.Note: Waterproofing compound shall be measured and paid for separately. |
| 31 | M&L for providing plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate for filleting, benching, coping of chajjah top/junctions, padding concrete below roof treatment, etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm completeall as specified andas directed . |
| 32 | Supply only integral liquid water proofing compound ISI Marked complete all as specified and as directed. |
| 33 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applyingwater proofing treatment as under :-(a) Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster.(b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen-based prefabricatedfive layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary of surface complete as per manufacturers instructions.(c)Apply two coats of bitumastic-alminium paint over the membrane over non assesible roof surfaces complete all as per manufacturer\"s instructions and as directed . |
| 34 | Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 35 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 36 | All as per item No.35 above, but except burnt bricks. complete all as specified and as directed. |
| 37 | Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 38 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position complete all as specified and as directed. |
| 39 | M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick walls/concrete surfaces and finished even and smooth without using extra cement in any position complete all as specified and as directed. |
| 40 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed. |
| 41 | M & L for applying 1.5mm thick wall care putty on wall surfaces to achieve a smooth and even finish, including preparation of surface, complete all as specified and as directed |
| 42 | M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. |
| 43 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed. |
| 44 | M&L for Preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 4.65 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 8.35 sq.m/litre/1 coat complete all as specified and directed. |
| 45 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 46 | M&L Glazed ceramic coloured tiles of size 600x300x7mm/450x300x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick cement plaster backing coat as in CM (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 47 | M&L for non skidjoint free ceramic colouredtiles of size 600mm x 600 mm7 to 8mm thick (coloured) (Square/rectangular) as in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 48 | All as per Sl item No 47 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 49 | M&L for8 mm thick (square/rectangular) Vitrified ceramic tiles double charged area of each tile exc 0.18 sqm but notexc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 50 | All as per Sl item No 49 above, but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 51 | M&L for8 mm thick (square/rectangular) ceramic tiles area of each tile exc 0.42 sqm but n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 52 | All as per Sl item No 51 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 53 | M&L for non skidceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) size of tile 300mmx300mm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 54 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 55 | All as per item No54 above,but as in skirtingover 10mm thick backing coat in CM (1:4). complete all as specified and as directed. |
| 56 | M&L for machine cut cudappa stone slab 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 57 | M&L for Granite Ist Quality Z black 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonework as insteps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. includingincluding cutting andpolishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 58 | Rounding off one edge of stone slabs, such as those used in steps, cooking platforms, and similar situations, complete all as specified and as directed . |
| 59 | M&L for precast cement concrete interlocking tiles 60 mm thick Rouber mould with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 60 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 61 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate ) as in sub-base/foundation filling and mass concrete/ finished to receive floor treatment etc complete all as specified and directed. |
| 62 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 63 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m complete all as specified and directed. |
| 64 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including making good all disturbed portion. complete all as specified and directed. |
| 65 | S&F powder coated aluminium sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.20mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37. complete all as specified and as directed. |
| 66 | S&F for powder coated aluminium ventilator shutters, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh 0.36mm nominal dia of wire andaverage width of aperature 1.20mm, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as. specified and directed. |
| 67 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed. |
| 68 | Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 69 | S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 38 mm x 1.5mm and cross Tee of size 38 mm x 38 mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 38 mm x 38 mm x 2mm fixed to wall perimeter at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed . |
| 70 | M&L for 4mm thick non asbestos fibre cement building boards of make \"E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed . |
| 71 | M&Lof false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame workfor seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as specified and directed.Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made flat from wall to wall without considering step(s). |
| 72 | S&F for 5 to 8 mm thickinterlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge including dismantling of old unserviceable board any type . |
| 73 | S&F for 0.50 mm thick GI channel of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed. |
| 74 | S&F for Powder Coated (minimum thickness of powder coating 50 micron) anodised aluminium frame and shutters for doors, windows, ventilators, room partitions with one or more rebates including joining glazing clips, rubber packing, cleat for fixing roller etc, incl all accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass panes in frame complete all as specified and as directed. Note : (i) Glass pane/ wire cloth will be measured and paid separately.(ii) The quoted rate shall be inclusive of cost of rubber beading and aluminium glazing clips, hinges,aluminium handle the same shall not be measured and paid separately. (iii) All other minor details including cost of locking arrangement shall be inclusive in the quoted rates. |
| 75 | M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips for aluminium/MS windows etc in square in n exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 76 | Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed . |
| 77 | S&Ffactory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame.The thickness of shutter is edges painted by matching colour of PVC lining ofplain/prelim coloured PVC sheet using etc complete as per manufacture specification. complete all as specified and as directed .Make : ECHON/Sintex/Rajshree/Navratan |
| 78 | S&F factory made 100 % plain solid wood plastic composite (WPC) flush type shutter of 18mm thickness consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame.The thickness of shutter is edges painted by matching colour of PVC lining ofplain/prelim coloured PVC sheet using etc complete as per manufacture specification. complete all as specified and as directed .Make : ECHON/Sintex/Rajshree/Navratan. |
| 79 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters,complete all as specified and as directed . Make :Hexa, Hettich, Hafele |
| 80 | S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, complete all as specified and as directed .Make :Hexa, Hettich, Hafele |
| 81 | S&F brass floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 82 | S&F 100 mm long Extruded stanless steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 83 | S&F 75 mm long stainless steelhandles designer type, fabricated type polished complete all as specified and as directed. |
| 84 | S&F 100 mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed. complete all as specified and as directed. |
| 85 | M&L for 250mm long stainless steel , sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed. complete all as specified and as directed. |
| 86 | M&L for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 87 | S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed |
| 88 | S&F 100 mm size aluminium anodized handle complete all as specified and directed |
| 89 | S&F 125mm size Hasp and staple, safety type,brass with mild steel hinge pinincluding bolt to hinge plate and fixed with screwscomplete all as specified and as directed . |
| 90 | S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified and as directed. |
| 91 | S&F 150 mm long Extruded aluminium alloy handles , fabricated type anodised complete all as specified and as directed. |
| 92 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii)Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates. Make : ECHON/Sintex/Rajshree/Navaratan |
| 93 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii)Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates. Make : ECHON/Sintex/Rajshree/Navaratan |
| 94 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii)Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates. Make : ECHON/Sintex/Rajshree/Navaratan |
| 95 | S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. Note : Stainless steel butt hinges and necessary SS screws shall be paid separately |
| 96 | M&L for Prelaminated particle board of 9mm thick, interior grade prelaminated both sides with decorative choice laminations with teak wood leaping fixed with screws as in cupboard shutters, bed room, kitchen, aluminium partition andinternal shelves complete all as specified and directed |
| 97 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples/welding to iron shutters/fixing to aluminium windows complete all as specified and as directed. |
| 98 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 99 | M&L for complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder including filling of cracks/holes by crack filler, removing unnecessary nails complete all as specified and directed. |
| 100 | M& L for applying two coats of oil-bound distemper (light shade) at the rate of 8.35 Sqm per litre for two coats on wall surfaces already prepared with wall putty, including one coat of interior wall primer at the rate of 10 Sqm per litre, complete all as specified and as directed |
| 101 | M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of exterior emulsion paint (light shade)@ 4.65 Sqm per litre for two coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces including filling of cracks/holes by crack filler complete all as specified and directed. |
| 102 | M&L for preparation of old decorated plastered or unplastersurfaces of walls and applying one coat of exterior emulsion paint (light shade)@ 9.30 Sqm per litre by using roller to prepared external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces including filling of cracks/holes by crack filler complete all as specified and directed. |
| 103 | Providing and fixing factory made single extruded WPC (Wood polymer composite) solid decorative both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. Note : Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 104 | S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. |
| 105 | S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 106 | S&F 100 mm long Stainless steelbutt hinges fixed with SS star headed full threded screw complete all as specified and as directed. |
| 107 | S&Fstainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. |
| 108 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as specified and as directed. |
| 109 | S & F powder coatedaluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements including necessay jointing cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle 02 Nos,Mortice lock, 200 mm long tower bolt 02 Nos,Double action floor spring heavy duty,SS hinges etc for Each doorwith and including tintet sheet glass of 5.50 mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat of aluminium frame 101.6x44.45mm and thickness of aluminium member not less than 1.40mm thick complete fitting and fixture complete all as specified and as directed. |
| 110 | M & L for preparing newplastered surface and applying threecoats of white wash on ceilling. complete all as specified and as directed. |
| 111 | S&F 150 mm size designer handle stainless steel cromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed. |
| 112 | S&F 30 mm continious ( piano) width of flap ( when open), hinges mild steel, bright finish or electrogalvanised, complete all as specified and as directed. |
| 113 | M&L for fabrication & fixing to horizontal & vertical shelves/partations/sides/top/bottom/back sides etc for Modular Kitchen cabinet/wardrobe/cupboard/drawers made out of 17/18 mm thick HDHMR boards (Water/termite proof) with plain on both sides of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping edges should be provided PVC taping to match the colour of board all around complete all as specified and as directed. (Make : Action tesa/Kitply or Archid) |
| 114 | M&L for fabrication & fixing to frontside/ all exposed sides of Modular Kitchen cabinet/wardrobe/cupboard/drawers made out of 17/18 mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all aroundcomplete all as specified and as directed. (Make : Action tesa/Kitply or Orchid) |
| 115 | S&F Stainless steel Z type hinges 100 mm longmedium weight fixed with SS star headed screw as in Kitchen cabinet cupboardshutters complete all as specified and as directed. |
| 116 | M&L for Preparation of old surfaces by cleaning to remove loose particles, dust etc, cutting grooves again, remove loose particles, dust etc properly filing cracks/damaged portions/hollow areas/gaps of RCC and masonary up to 15 mm to 20 mm width and 10 mm to 15 mm deep by using polymer modified cement mortars and making good, of any height including necessary scafolding and as per manufacturers instructions.complete all as specified and as directed. |
| 117 | M&L for prepration of preparation of New/old decorated plastered or unplastered surfaces of walls/chajjas by cleaning to remove loose particles, dust, latance etc., Filling of holes/Cracks with CNS filler material. Applying one priming coat ofSMART CARE DAMP PROOF with thinner at the rate of 0.40 Ltr/Sqm (0.20Ltr Smart Damp Proof : 0.20Ltr Water). Applying second coat ofSMART CARE DAMP PROOF after 05 to 06 Hrs at the rate of 0.40 Ltr/Sqm, and apply the third coat after 6 to 8 Hrs once the second coat is dry at the rate of 0.40 Ltr/Sqm all as directed of any height and as per manufacturers instructions. complete all as specified and as directed.Make : M/s Asian Paint/Berger/ Pidilite Industries Ltd/ STP Ltd./Choksey. |
AI Tender Summary
Tender Timeline
Aug 20, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 24, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender