Tender For Repair To Joinery Incl Upvc Doors/Windows , Flooring , Tiling , Galvalume Sheet Roofing Etc In Otm Accn & Ge Office At 54 Asp Under Ge (Af) Gurgaon No.1; 1 Schedule-A (B/R Work) 2 Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge. 3 Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (withour taking off shutters from the frame all as specified and directed by Engr-in-Charge. 4 Taking down shutter of any discriptionn.exc 1 Sqmeachcomplete all as specified and directed by Engr-in-Charge. 5 Taking down shutter of any discriptionexc 1 Sqm but n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge. 6 M&L second class Hardwood 35 mmthickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified by Engr-in-Charge. 7 S&Ffactory made 30mm thicksolidcore Flush door shutter with block board with BWP plywood on both side all as specified directed by Engr in Charge. 8 M&L second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified and directed by Engr-in-Charge 9 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing. 10 Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing. 11 S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified ,erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr -in -charge. 12 M&L for 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed by Engr-in-Charge. 13 S&F in repair stainless steel wire cloth with 8% nickle 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge. 14 M&L for preparation of new woodensurfacesof anydescriptionnot otherwise described, over10 cm widthor girth and applying two coat of synthetic enamel paint over one coat of pink wood primer all asspecifiedand directed by Engineer-in-Charge. 15 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge 16 S&F factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. 17 S&F 18mm thickness prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as directed by Engr-in-Charge. 18 S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed by Engr-in-Charge 19 M&L Preparation of old woodensurfacesof anydescriptionnot otherwise described, over10 cm widthor girth and applying one coat of synthetic enamel paint all asspecifiedand directed by Engineer-in-Charge. 20 S&F stain less steel bright polished bow handle solid type150mm grip length fency type complete all as specified and directed by Engr -in -charge 21 S&F stain less steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and directed by Engr-in-Charge. 22 S&F 100mm long medium grade stain less steelbut hinges bright polished fixwith nut and bolt complete all as specified and directed by Engr-in-Charge. 23 S&F 250mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge. 24 Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and directed by Engr-in-Charge. 25 M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. 26 M&L for rendering 15 mm thick in cement motar 1:6 on brick work or concrete surfaces other than fair face of brick work, finished fair & even without using extra cement all as specified and directed by Engr-in-Charge. 27 M&L for rendering 5 mm thick in cement motar 1:3 on ceilingon concrete surfaces, finished fair & even without using extra cement complete all as specified and directed by Engr-in-Charge. 28 M&L for Preparing Newly Plastered Surfaces of WALLS and applyingtwo coat ofexterior grade acrylic emulsion paintover one coat ofJK/cement base puttyall asspecifiedand directed by Engineer-in-Charge. 29 M&L Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge. 30 M&L Preparation of new plaster surfaces of ceiling, and applying two coat of white wash on ceiling all as directed by Engr-in-Charge. 31 Dismantlingof brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified and directed by Engr-in-Charge. 32 M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge. 33 Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness (below above ground floor) and removal of rubbish material outsite MoD land complete all as specified and directed by Engr-in-Charge. 34 M&L 100mm thick Cement concrete type B2 using1:2:4 40 mm graded stoneaggregate as in path finished even smooth with broom finished without using extra cement complete all as specified and directed by Engr-in-Charge. 35 M&L 75 mm thick in PCC 1:3:6 type C-2 using 40mm graded aggregate as in Plinth protectionincluding 6x10mmgrove in every 3Mtr includingbitumen mastic filling complete all as specified and directed by Engr-in-Charge. 36 M&L for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge. 37 M&L glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge. 38 M&Lfor 60mm thick Machine pressed pre casted pressed cement concrete inter locking paver blocks glazedcoloured up to 6mm on the top in any shape and size, strength not less than M-35completed all as specified and as directed by Engr-in-Charge. 39 M&L for sand filling under floors or in foundations incliding watering & consolidation complete all as specified and directed. 40 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 41 S&F 8 to 10mm thick densified reqular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including main T runner of size 24x38mm made from 0.33 mm sheet hot deep galvanized steel sectionmaking good existing frame without disterbing the other false ceiling with all as directed by Engr-in-Charge. 42 M&L for Providing & fixing false ceiling at all heights with Semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 43 S&F insulated PVC wall panelling 40mm thick consisting of PVC insulated panels having expanded polysterene (EPS) stuck to 2mm thick insulated panel with wood grain printed PVC sheet duly fitted into the wall each panel interlock with each other complete all as specified and directed by Engr-in-Charge. 44 S&F PVC Louvers panels on walls duly fitted into the wall each panel interlock with each other complete all as specified and directed by Engr-in-Charge. 45 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge. 46 S&F in repair0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws,complete all as specified and directed by Engr-in-Charge. 47 S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J-type or cranked hook botls and washer in roof, wall and similar work etc all as specified and directed by Engr-in-Charge. 48 Dismantling ofwall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land. 49 M&L for vitrified tiles7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqmin floors etcset and jointed in neat cement slurry andjointed in white/coloured cement to match over and including10 mm thick screed bedin cement mortarin1:4, complete all as specified and as directed by Engr-in-charge. 50 M&L for glazed ceramic coloured designer concept tiles matching with existing tile 600x300x7mm or 450x300x7mm 300x300x7mm size as in walls set and jointed in neat cementslurry over 10mm thickin cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting / dado etcall as specified and as directed by Engr-in-Charge. 51 M&L 20-25 mm thick machine cut Kota stone slab flooring over 15mm thick in CM 1:6cement screed bed and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge. 52 M & L for Granite (of any type) work 16-20 mm thick(table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform, verticle surfaces and any positionin cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl screed bed 10mm thick in CM 1:4 incl chamfering and rounding of edges where requiredall as specified and directed by Engr-in-Charge. 53 M&L for 10 mm thick glossy finsih for parking/ path (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqmin floors etcset and jointed in neat cement slurry andjointed in white/coloured cement to match over and including10 mm thick screed bedin cement mortarin1:4, complete all as specified and as directed by Engr-in-charge. 54 Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and directed. 55 M&L PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed. 56 Material and labour, 10mm thickcement plaster on brick work or over roofsurfacein CM (1:4) mixed with WPC as per manufacturer’s instructions , finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. 57 M&L water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified.(c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. 58 Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. 59 M&L Applingone coat Bitumenwater proofing aluminium heat resistance painton the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. 60 Dismantling mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge. 61 S&F for MS angle iron as in posts, gate, door frame and strutsin fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge. 62 S&F Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and directed by Engr-in-Charge. 63 Supplied only Chain link MS galvanised fencing, any size or type with 2 mm dia galvanised steel wire any size or type all as specified and directed by Engr-in-Charge. 64 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed by Engr-in-Charge. 65 M&L Preparation of new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamel paint complete all as specified and directed by Engr-in-Charge. 66 Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/ loose soil all as specified and directed by Engr-in-Charge. 67 S&Fin repair Aluminium floor door stopper double legged anodised with hard drawn steel springs fixed on doors 100mnm longall as specified and directed by engr in charge . 68 S&F Glass shelf 10mm thick tempered rounded moulded 450*200mm inclding fixing arrangement such as F bracket or SS clamps with fixing on walls all as per sample all as specified and directed byu Engr-in-Charge. 69 S&F in repair, Mortice latch with two levers (vertical type), mild steel body and fixed (length of latch 100mm) completeall as specified and as directed by Engineer-in-Charge. 70 S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed all as specified and directed by Engr-in-Charge. 71 Fixing only in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I,complete all asspecified and directed byEngineer in charge. Note : HDPE Tank will be supplied by the department & will be collected by contractor from MES Yard free for fixing. 72 Fixing only in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I,complete all asspecified and directed byEngineer in charge. Note : HDPE Tank will be supplied by thedepartment & will be collected by contractor from MES Yard free for fixing. 73 S&F in repair 20mm bore , CPVC confirming to IS 15778, SDR 11 pipe first Class with all fittingcomplete fiixed on wall, celling andfloor incl taking down old pipe line complete all as specified and directed by Engr-in-Charge. 74 M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping cill, rounded or chamffered on edges complete all as specified and directed by Engr in Charge. 75 M&L for cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-Charge. 76 S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets completeall as specified and as directed by Engineer-in-Charge. 77 Demolition of reinfroced cement concrete in any descriptionin any position (reinforcement cut as requiredto faciliate the demolition) and removed from MOD Land all as specified and directed by engineer-in-charge. 78 M&L for Formwork to soffits of suspended slabs such as roof slabs ,floor slabs ,landings and similar work, not exceeding 200mm thick horizontal or sloping, complete all as specified and directed by Engineer-in-Charge. 79 M&L steel deformed bars (TMT bars) 10mm dia, and overin reinforcement, cut to length, bent to shape required, incl. cranking, hooking ends, binding with and including mild steel (annealed) binding wire not less than 0.90mm dia or securing with clips complete all as specified. 80 All as per Srl Item no.78 above, but 6mm to 8mm dia bars. Spacer and striups complete all as specified and as directed by Engr-in-charge. 81 M&L for RCC(Nominal mix concrete) A-1, 1:1.5:3 (20mm graded aggregate) in slabs supported on walls,Beams, columns in floors , roofs ,landings ,balconies,canopies, deck slabs and in shelves and the like, complete all as specified and as directed. 82 M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed by Engr-in-charge . 83 Removing/ Re-fixng for stainless steel letter at any size on grinate wall/piller complete all as specified and directed bi Engineer-in-charge. 84 S&F powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottomrail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge 85 S&F powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour anodised aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Noscomplete all as specified and directed by Engineer-in-Charge. 86 M&L in repair fabrication of aluminium composite panel of 4mm thick with .5 mm aluminium core/skin as a tap and bottom layer, middle ;ayer 3mm thick of polythincore (LDPE) and finally with PVDF coating 28 to 32 micron and joints filed with silicon sealant and including aluminium frame of section 37.5mm x 25mm x 1.6mm fixed on the wall/ columns as a cladding and on ceiling of steel structure/ RCC celing withscrew complete incl dismantling of old decayed panels all as directed and as per manufactures instruction, coloured/texture pattern as diesided by Engr-in-Charge all as specified and as directed. 87 S&F aluminium anodized grillas per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge. 88 S&F 5 mm thick tinted glass of selected quality fixed to aluminium frame of any section as in item here-in-before incl snal fit aluminium clips of polyester powder coated along the glass with rubber gasket complete all as specified and directed by Engr-in-Charge. 89 S&F 2mm thickness floor PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete as per specifications and direction of the Engineer-in-charge 90 M&L for retro reflective flex sheet/bord (size as per site requirement ) with printed letter/words (name specified by engr-in-Charge ) pasting on canopy/wall/gates etc upto 15mtr height complete all as specified and directed by Engr-in-Charge. 91 M&L washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster 1:4 (1cement 4coarse sand) furrowingthe under layer with scratching tool applying cement slurry @ 3kg/sqm top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand : 2 stone chipping coloured 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing & washing the top layer with brushes & water to expose the stone chipping and taking down old grit plaster complete all as specified pattern decided by Engr-in-Charge.(payment for providing grooves shall be made separately).Note:- Top layer of shade be of white cement using colouring pigment & stone chipping of desired colour as approved. 92 Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge 93 Note:- The amount of Rs81010.00 against Schedule of Crediton Srl Page145 shall be deducted from the total amount quoted against Sch A
