Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Deployment of Facility Manager (FM) for heading the entire teamand single point of contact & overall incharge of FM on site operators and reporting to Engineer-in-charge or hisrepresentative. (Note: Facility Manager is to be deployed onmonthly basis only) (Analysed rate) |
| 2 | Deployment of 1 (one) no. carpenter (skilled manpower) and 1(one) no. helper (unskilled manpower) in general shift for day to day maintenance work related to carpentary work like repairing of door, window, fixing of door and window fittings & other works as per instruction of EIC as and when required as per instruction of EIC. (Analysed rate) |
| 3 | Deployment 01 (one) Plumber (skilled manpower) and 01 (one) helper (unskilled mapower) for day to day maintenance works related with plumbing works in Two Shifts as per instruction of Engineer-in-charge. (Analysed rate) |
| 4 | Deployment 01 (one) Sweeper (unskilled mapower) for sanitary pipe line maintenance works as and when required in general shift as per instruction of Engineer-in-charge. ( Analysed rate) |
| 5 | Deployment 01(oneWelder) (skilledmanpower)and 01(one) helper (unskilledmapower) for maintenance works related with welding works related to plumbing, MS door/ window/ grill repairing work or other civil repairing work on requirement basis in General Shift as per instruction of Engineer-in-charge.Including welding machine and all tools and tackles (cost of welding rod will be paid separetly) (Analysed rate) |
| 6 | Deployment 06 (six) semiskilled mapower for day to day operation various valves points, submersible pump motors, operation of various fountains & sprinkler system in Two Shifts as per instruction of Engineer-in-charge. (Analysed rate) |
| 7 | Lifting of submersible pump motor set with chain pulley mounted on tripod or other mechanical means including necessary tools all complete upto depth of 100 m. (Analysed rate) |
| 8 | Lowering of submersible pumpmotor set with chain pulley mounted on tripod or other mechanical means including necessary tools all complete upto depth of 100m. (Analysed rate) |
| 9 | Providing and fixing unplasticised Polyvinyl Chloride (UPVC) column pipe for Submersible Pump,This includes jointing of pipes & fittings and testing of joints complete as per direction of Engineer-in-Charge. 38 mm nominal dia pipes (Astral Product code M071140305 or Equivalent) ( Analysed rate) |
| 10 | Flushing of bore hole by drilling machine.( Analysed rate) |
| 11 | Providing of Nylon rope 12 mm dia for holding the submersible pump-motor set as per instruction of Engineer-in-charge.( Analysed rate) |
| 12 | Providing of 50 mm dia CI Adopter as per instruction of Engineer-in-charge.( Analysed rate) |
| 13 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. (Refer CPWD DSR 2023-1.1.18) Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil (Refer CPWD DSR 2023-2.6.1) |
| 15 | Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. (Refer CPWD DSR 2023-2.27.1) |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-4.1.2) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-4.1.3) |
| 18 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-4.2.2) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.(Refer CPWD DSR 2023-4.3.2) |
| 20 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-4.4.1) |
| 21 | Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used as per directions of Engineer-in-Charge.(Refer CPWD DSR 2023-4.18) |
| 22 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-5.1.2) |
| 23 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Refer CPWD DSR 2023-5.2.2) |
| 24 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(Refer CPWD DSR 2023-5.3) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete(Refer CPWD DSR 2023-5.9.1) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (Refer CPWD DSR 2023-5.9.3) |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)(Refer CPWD DSR 2023-5.9.4) |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers(Refer CPWD DSR 2023-5.9.5) |
| 29 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(Refer CPWD DSR 2023-5.12) |
| 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(Refer CPWD DSR 2023-5.22.6) |
| 31 | Providing and fixing in position copper plate as per design for expansion joints.(Refer CPWD DSR 2023-5.25) |
| 32 | Providing and filling in position, blown bitumen in expansion joints.(Refer CPWD DSR 2023-5.26) |
| 33 | Providing and filling in position bitumen mix filler of proportion 80 kg. Of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints.(Refer CPWD DSR 2023-5.27) |
| 34 | Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints.(Refer CPWD DSR 2023-5.28) |
| 35 | Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm thick.200 mm wide(Refer CPWD DSR 2023-5.29.2) |
| 36 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.300 mm wide.(Refer CPWD DSR 2023-5.43.2) |
| 37 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)(Refer CPWD DSR 2023-6.1.2) |
| 38 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)(Refer CPWD DSR 2023-6.4.2) |
| 39 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)(Refer CPWD DSR 2023-6.12.2) |
| 40 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.cement mortar 1:4 (1 cement : 4 coarse sand)(Refer CPWD DSR 2023-6.13.2) |
| 41 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)(Refer CPWD DSR 2023-7.1.1) |
| 42 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)(Refer CPWD DSR 2023-7.2.1) |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm (Refer CPWD DSR 2023-8.2.2.2) |
| 44 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. Granite work (Refer CPWD DSR 2023-8.3.2) |
| 45 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (Refer CPWD DSR 2023-8.6) |
| 46 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminiummposite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all theerformance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. (Refer CPWD DSR 2023-8.32) |
| 47 | 9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.20.2 30mmthickincludingISImarkedStainlessSteelbutthingeswith necessary screws. (Refer CPWD DSR 2023-9.20.2) |
| 48 | Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window upto 2.50 sqm). (Refer CPWD DSR 2023-9.147.A3.1) |
| 49 | (Refer CPWD DSR 2023-9.158.2)Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 18 mm thick.(Refer CPWD DSR 2023-9.158.2) |
| 50 | Supply & fixing of maple hardwood flooring 21 mm thick as per directon of EIC .(Analysed Rate) |
| 51 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Refer CPWD DSR 2023-10.1) |
| 52 | (Refer CPWD DSR 2023-10.5.2)Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 53 | (Refer CPWD DSR 2023-10.6.3)10.6 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides end by end locks mounted on specially designed pipe shaft with brackets, side guides and complete including the cost of providing and fixing necessary27.5cm long wirearrangementsforinsideandoutsidelockingwithpush andpulloperation springs grade No.2 and M.S. top cover of required thickness for rolling shutters. |
| 54 | (Refer CPWD DSR 2023-10.7)10.7 : Providing and fixing ball bearing for rolling shutters |
| 55 | (Refer CPWD DSR 2023-10.8.1)10.8: Extra for providing mechanical device chain and crank operation for operating rolling shutters.10.8.1:Exceeding 10.00 sqm and upto 16.80 sqm in the area. |
| 56 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (CPWD DSR -2023 Code No. 10.28) |
| 57 | Brick on edge flooring with bricks of class designation 75 including cement slurry etc. complete in cement mortar with F.P.S. bricks 1:6 (1 cement: 6 coarse sand)(Refer CPWD DSR 2023 code11.1.2 |
| 58 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (CPWD DSR -2023 Code No. 11.3) |
| 59 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick (CPWD DSR -2023 Code No.11.26.1) |
| 60 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(CPWD DSR -2023 Code No.11.27) |
| 61 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. CPWD DSR-2023-Code 8.31 |
| 62 | Providing and laying Glazed Ceramic floor tiles(thickness to be specified by the manufacturer) conforming to IS : 15622, of approved make, in all colours, shades except White, Ivory, Grey, Fume Red Brown, of any size as approved by Engineer-in-charge laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matchingpigments etc., complete. (CPWD DSR -2023 Code No.11.37) |
| 63 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (CPWD DSR -2023 Code No. 11.41.2) |
| 64 | (CPWD DSR -2023 Code No. 11.42)11.42: Deduetfor not using 20mm thick cement mortar 1:4 (1 cement :4 coarsesand ) bedding in laying of floor tiles. |
| 65 | (CPWD DSR -2023 Code No. 11.43)11.43: Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. Adhesive per sqm of tile area, in average 3mm thickness. |
| 66 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm(CPWD DSR -2023 Code No.11.46.2) |
| 67 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester topoat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch inorizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(CPWD DSR -2023 Code No. 12.50) |
| 68 | 12.58 Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm intrue horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.58.18 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. |
| 69 | (CPWD DSR -2023 Code No. 13.1.2)12 mm cement plaster of mix : 1:6 (1cement : 6fine sand) |
| 70 | (CPWD DSR -2023 Code No. 13.7.2)12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) |
| 71 | (CPWD DSR -2023 Code No. 13.16.1)13.16 6 mm cement plaster of mix: |
| 72 | (CPWD DSR -2023 Code No. 13.41.1)13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than50 gram/litre, of approved manufacturer and of required shade and colour all complete toachieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cementprimer having VOC content less than 50 gram/litre |
| 73 | (CPWD DSR -2023 Code No. 13.47.1)13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 74 | (CPWD DSR -2023 Code No. 13.50.2)13.50 Applying priming coat:13.50.2 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 75 | (CPWD DSR -2023 Code No. 13.62.1)13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 76 | (CPWD DSR -2023 Code No. 13.63.1)13.63 Painting with aluminium paint of approved brand and manufacture to give an even shade .13.63.1 Two or more coats on new work |
| 77 | (CPWD DSR -2023 Code No. 13.69.1)13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture :13.69.1 New work |
| 78 | (CPWD DSR -2023 Code No. 13.71)13.71 Lettering with black Japan paint of approved brand and manufactur |
| 79 | (CPWD DSR -2023 Code No. 13.81.1)13.81 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats) |
| 80 | (CPWD DSR -2023 Code No. 13.82.2)13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour13.82.2 Two coats |
| 81 | (CPWD DSR -2023 Code No. 13.85.3)13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 82 | (CPWD DSR -2023 Code No. 13.91)Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 83 | (CPWD DSR -2023 Code No. 13.99.1)13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.99.1 One or more coats on old work |
| 84 | (CPWD DSR -2023 Code No. 13.100.1)13.100 Painting with aluminium paint of approved brand and manufacture to give an even shade:13.100.1 One or more coats on old work |
| 85 | (CPWD DSR -2023 Code No. 13.105)13.105 Re-lettering with black Japan paint of approved brand and manufacture. |
| 86 | (CPWD DSR -2023 Code No. 13.111.1)13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 87 | (Refer CPWD DSR 2023-14.72) Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 88 | (Refer CPWD DSR 2023-14.81)14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
| 89 | (Refer CPWD DSR 2023-14.82)14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge |
| 90 | (Refer CPWD DSR 2023-14.89) Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.14.89.1 2mm (for corrugated roof sheets) |
| 91 | (Refer CPWD DSR 2023-15.2.2)15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix |
| 92 | (Refer CPWD DSR 2023-15.12.1)15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1 Of area 3 sq. metres and below |
| 93 | (Refer CPWD DSR 2023-15.13.1)15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 Of area 3 sq. metres and below |
| 94 | (Refer CPWD DSR 2023-15.23.1)15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm |
| 95 | (Refer CPWD DSR 2023-15.56)Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 96 | (Refer CPWD DSR 2023-16.18)16.18 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.16.18.1 With G.I. barbed wire |
| 97 | (Refer CPWD DSR 2023-16.53)16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately |
| 98 | (Refer CPWD DSR 2023-16.60.1)16.60 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).16.60.1 Overhead informatory road signage |
| 99 | (Refer CPWD DSR 2023-16.68)16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 100 | (Refer CPWD DSR 2023-16.70.2)16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 101 | (Refer CPWD DSR 2023-16.89)16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 102 | 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made26.86.1 Frame size 45 x 70 mm |
| 103 | 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.87.1 30 mm thick |
| 104 | 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):2l.1.1 For fixed portion.2.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 105 | 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 106 | 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings andthedirectionsof engineer-in-charge.(Costof aluminiumsnap beading shall be paid in basic item):21.3.1 With float glass panes of 4.0 mm thickness |
| 107 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.CPWD DSR 2023 Code 13.80 |
| 108 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes12.41.2 110 mm diameter |
| 109 | 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories forunplasticised R igidPVC rainwaterpipes conformingtoIS :13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.12.42.3 Single tee with door 12.42.3.2 110x110x110 mm |
| 110 | CPWD DSR -2023 Code No.12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend |
| 111 | 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories forunplasticised R igidPVC rainwaterpipes conformingtoIS :13592Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.12.42.6Shoe (Plain)12.42.6.2 110 mm Shoe |
| 112 | 12.43 Providing andfixingunplasticised-PVCpipeclipsofapproveddesignto unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete.12.43.2 110 mm |
| 113 | 17.7Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 114 | 17.34 Providing and fixing toilet paper holder :17.34.1C.P. brass |
| 115 | 17.8 Providing and fixing whitevitreous chinapedestal for wash basincompletely recessed at the back for the reception of pipes and fittings. |
| 116 | 17.10 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:17.10.1 Kitchen sink with drain board17.10.1.1 510x1040 mm bowl depth 250mm. |
| 117 | 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :17.32.2 Rectangular shape 453x357mm |
| 118 | 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :17.32.4 Rectangular shape 1500x450 mm |
| 119 | 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws withconcealed fitting arrangement of approved quality and colour.17.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 120 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 17.78 |
| 121 | 18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 18.13.1 25 to 40 mm nominal bore |
| 122 | 18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :18.13.2 50 to 80 mm nominal bore |
| 123 | 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):18.31.1 100 mm diameter |
| 124 | 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):18.31.3 150 mm diameter18.31.3.1 Class I |
| 125 | 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):18.31.6 300 mm diameter18.31.6.1 Class 1 |
| 126 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes12.41.2 200mm diameter |
| 127 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes12.41.2 250mm diameter |
| 128 | 17.36 Providing and filling the joints with spun yarn, cement slurry and cement |
| 129 | (Refer CPWD DSR 2023-9.70.2) Providing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 130 | (Refer CPWD DSR 2023-9.62.2)Providing ISI m arked oxidised M.S.sliding door bolts with nuts and screws etc. complete |
| 131 | (Refer CPWD DSR 2023-9.63.2) ProvidingISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete |
| 132 | (Refer CPWD DSR 2023-9.66.1)Providing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 133 | (Refer CPWD DSR 2023-9.84)Providing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 134 | (Refer CPWD DSR 2023-9.88) : Providing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 135 | (Refer CPWD DSR 2023-9.101.2)Providing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 136 | Supply of 1 mm thick laminate (Refer CPWD DSR 2023-9.127.2) Providingdecorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of aproved quality |
| 137 | SupplyProviding factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, havingsmooth gradualslopecurvaturefor easydrainageofwaterandduly reinforced by 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 11551 complete with protective Gelcoat U/V coating on Top for complete resistance from the extreme of temperature, |
| 138 | Supply Stonedust |
| 139 | Providing 6 mm thick plywood of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethan primer (fittings to be paid separately). Analysed Rate |
| 140 | Providing12 mm thick plywood of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). Analysed Rate |
| 141 | Providing 19 mm thick plywood of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) Analysed Rate |
| 142 | Supply wall Paper |
| 143 | 17.13 Providing white vitreous china water closet squatting pan (Indian type) |
| 144 | 17.15 Providing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 145 | 17.20 Providing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 146 | 17.23 Providingwhite vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. |
| 147 | 17.28 ProvidingP.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 148 | 18.54 Providing and fixing PTMT bib cock of approved quality and colour. |
| 149 | 17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 150 | 17.70 ProvidingPTMT Bottle Trap for Wash basin and sink. |
| 151 | 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials withsnapfittin gsofapprovedqualityand coloursweighing not less than 105 gms |
| 152 | 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms |
| 153 | 17.75 Providing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60gms. |
| 154 | 17.76 Providing and fixing PTMT urinal cock of approved quality and colour. |
| 155 | Providing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 156 | 18.7 : ProvidingChlorinatedPolyvinylChloride(CPVC ) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with o ne stepC PVC solven t cement and testing of joints com plete as per direction of Engineer in Charge. (Internal work Exposed on wall)18.7.1: 15 mm nominal outer dia .Pipes. |
| 157 | 18.7 : ProvidingChlorinatedPolyvinylChloride(CPVC ) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with o ne stepC PVC solven t cement and testing of joints com plete as per direction of Engineer in Charge. (Internal work Exposed on wall)18.7.2 20 mm nominal outer dia .Pipes. |
| 158 | CPWD DSR -2023 Code No18.8 ProvidingChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20 mm nominal outer dia Pipes |
| 159 | 18.17 Providinggun metal gate valve with C.I. wheel of approved quality (screwed end):18.17.125mm dia.Gun metal gate valve with wheel |
| 160 | 18.17 Providinggun metal gate valve with C.I. wheel of approved quality (screwed end):18.17.3 40 mmnominal bore |
| 161 | 18.17 Providing gun metal gate valve with C.I. wheel of approved quality (screwed end):18.17.4 50 mmnominal bore |
| 162 | 18.17 Providinggun metal gate valve with C.I. wheel of approved quality (screwed end):18.17.6 80 mmnominal bore |
| 163 | 18.18 Providing and ball valve (brass) of approved quality complete :18.18.1 High or low pressure with plastic floats:18.18.1.1 15 mm nominal bore |
| 164 | 18.21 Providinguplasticised PVC connection pipe with brass unions :18.21.2 45 cm length |
| 165 | 18.22 ProvidingC.P. brass shower rose with 15 or 20 mm inlet:18.22.1 100 mm diameter |
| 166 | 18.48 Providingpolyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 167 | 18.49 ProvidingC.P. brass bib cock of approved quality conforming to IS:8931 |
| 168 | 18.50 ProvidingC.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 169 | 18.51 Providing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 170 | 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 171 | 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 172 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 173 | 18.58 Providing and fixing PTMT grating of approved quality and colour. |
| 174 | 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85gms. |
| 175 | 18.65 Providing and fixing PTMT soapDish Holder havinglength of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 176 | 18.75 ProvidingandfixingPTMT extensionnippleforwatertankpipe,fittingsof approved quality and colour. |
| 177 | 18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.18.62.3 25 mm nominal bore, 152mm long, weighing not less than 440gms |
| 178 | 17.35 Providing and fixing soil, waste and vent pipes:17.35.1 100 mm dia.17.35.1.1 Sand cast iron S&S pipe as per IS: 1729. |
| 179 | 18.56 Providing and fixing PTMT pillar cock of approved quality and colour . |
| 180 | 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 181 | 17.69 Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour. |
| 182 | DerivedRate Providing 32 mm dia CP Waste Coupling for wash basin and sink as per instruction of EIC. |
| 183 | Providing CP brasspillar cockJaquar ARI CHR 39011 or equivalent of approved quality . |
| 184 | Derived Rate Providing wall mixture 3 in 1 system with provision of overhead sh ower with elbowcuppling and wall flange ( jal,jaguar,Mark, or equivaent mark) complete as per instruction of EIC |
| 185 | Analysed Rate Providing C.P.Bib cock with wall flange jaguar make continental 047 KN model or equivalen |
| 186 | Analysed Rate ProvidingPressmatic basin pillar cock auto closing system PRS-031 JAQUAR make or equivalent as per instruction of EIC. |
| 187 | Analysed Rate Providing two way bib cock with wall flange JAQUAR make Florentine 5041N model or equivalent complete as per instruction of EIC. |
| 188 | Analysed Rate Providinghand shower (Health Faucet) (ABS Body) with 1 meter long easy flex tube in chrome finish and wall hook JAQUAR make allied ALD 585 model |
| 189 | Analysed Rate Providing overhead shower (OHS-CHR-1989) 100mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system and shower arm casted (model no. SHA 477) 190 mm long light body round shape for wall mounted showers with wall flange all JAQUAR or equivalent make |
| 190 | Analysed Rate for uPVC pipe 25 mm dia (Based on item no. 18.7.3 of DSR CPWD 2023) |
| 191 | Analysed Rate for uPVC pipe 32 mm dia (Based on item no. 18.7.3 of DSR CPWD 2023) |
| 192 | Analysed Rate for uPVC pipe 40 mm dia (Based on item no. 18.7.5 of DSR CPWD 2023) |
| 193 | Analysed Rate for uPVC pipe 50 mm dia (Based on item no. 18.7.6 of DSR CPWD 2023) |
| 194 | Fooging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc).(Analysed Rate) |
| 195 | General pest controlwith Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.)(Analysed Rate) |
| 196 | Rodent control by providing equiptment like Glue Trap,rodent box,zinck phosphate, and rat run at Mega Sports Complex as per direction of EIC. |
| 197 | Cockroach Control by providing materials like gel and spray in boys hostel and Girls hostel at Mega Sports Complex under JSSPS,Ranchi |
| 198 | Antitermite Treatment with chloropyriphose (20 % EC)(20 mlchloropyriphose mixed with 1 Litr turpentine oil )as & when required during contract period according to direction of EIC(Treatment to be done using spray machine along with proper safety provisions like mask etc.)(Analysed Rate) |
| 199 | Total impact of GST for the purpose of CTC |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
