Tender For Maintenance of Drain (Repair And Strengthening Of Drain In A, B, C And D Block Sector-47) Noida - Earth work in excavation by machanical means (Hydraulic excavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contrator has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas pipe line etc. using utility detecting machine before start of excavation and shallstart excavation only after getting permission of Engineer-in-charge. 2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand AOR 6.1.1 3 Taking out existing CC interlocking Paver Blocks from footpath/central verge, including removal of rubbish etc. disposal ofunserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge (DSR 2016/ I.No. 16.83/P-280) 4 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost) 5 P/L factory made coloured chamfered edge cement concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, caompacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate/vibrator filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufactures specifications & Direction of Engineer in charge 60mm thick C.C. paver block of M-35 grade with approved colour, design & pattern. DSR-2018/I.No-16.91) 6 Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminium sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - Ill of ASTM-D-4956-01 as approved by Engineer-in-charge letters, borders etc. as per IRC 67- 2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage. 7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exccding 30 cm in depth, 1.5m in width or 10 sqm on plan) including disposal of excavatedlead upto 50 mtr. & lift upto 1.5Mtr. dispose earth to be leveled & dressed. : All kinds of soil. The Contractor has to detect Different utilities like sewer line, water Supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-Charge 8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) DSR 18/I.No. 4.1.8/P- 9 Providing & Laying in position cement concrete of specefied grade excluding the cost of centring and shuttering - All work upto plinth level -1:2:4 (1cement : 2 C-sand : 4 graded stone agg. 20MM N.S.) (DSR 16 I.No. 4.1.3 P-85) 10 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222) 11 Neat cement punning. 12 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. 13 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x450x50 mm, reinforced with 8 mm dia four no longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 14 Providing and placing in position 100 mm thick factory mademachine batched & machine mixed Precast RCC RectangularCovers on drains of footpath of various sizes, of M-25 gradecement concrete for RCC work,including cost of centering,shuttering,reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/con both ways , neat cement punning on finished surface,properly encased on all edges with 1.6 mm thick, 100 mm wideMS sheet duly painted over priming coat ,reinforcement to bewelded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etci/c cost of cartage, all leads & lift, handling at site etc. allcomplete as per direction of Engineer-in-Charge.
