Tender For Furnishing Jagadhari Branch => Limited; 1(i) Providing & Fixing false ceiling at 9’-0” ht. (as per drg.) of India Gypsum Ltd. using 12.5mm thick Gypboard, paper tape, jointing compound, G.I. Sections to be placed at 4’-0” C/C in one direction and at 1’-6” C/C in other direction. The false ceiling shall be finished properly after cutting / making holes for fixing light fixtures including three coats of oil bound distemper paint etc. complete as per drgs. 800 Sqft. ii Making Cove in Gyp false ceiling (1-6 widthXRft). 130 Rft. iii PPGI METAL SHEET FALSE CEILING: Providing & fixing in position false ceiling in Armstrong 600 x 600 mm PPGI Metal microlook lay-in standard perforated / plain tiles silhouette 38 made of 120 gsm pre-painted galvanised iron, Grade-GPL as per IS277 (2018) with coating durability as per IS 4246 color as approved by Bank/architect with 15mm exposed grid system (Grid frame shall have black groove at bottom) by Armstrong Co. with suspenders. Making necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for A.C unit . 790 Sqft. 2 i TOUGHENED GLASS DOORS & PARTITION (for Bank entry and Manager Cabin): Providing & fixing 12 MM thick toughened glass for door and fixed glazing, with complete patch fittings such as handles, lock and L-brackets etc. The job shall also include etching design. 320 Sqft. ii P/F floor spring for toughened glass doors. 4 Nos 3 Providing and fixing wooden partition made of internal frame of alum sections of size 1.75x1.75 placed at 2’-0” c/c vertically and horizontally finished with 9mm thick commercial ply on both sides with 1.00 mm thick laminate on both sides with horizontal grooves. These partitions shall have 5.00 mm / 12mm thick glass as mentioened below (etching as per design) above 2’-6” ht. or 4’-0” ht with beading ½”x1 1/2” . The rate of partition shall include providing & fixing wooden door finished with laminate on both sides and partly glass, but with complete hardware required such as latches, stopper. The low ht. partition shall have MDF-wood gola of size 3” x 0.5 to 0.75 which shall be polished as per shade reqd. 3(i) Low ht. partitions with 12 mm thick glass. 200 Sqft. (ii) Full ht. partitions with/without 5 mm thick glass. 150 Sqft. (iii) a) Cash-Cabin’s pts (7’-3” high) 60 Sqft. (iv) b) Cash cabins’ as well as single windows’ front ptn. with 12mm th. Glass. 50 Sqft. (v) Partition in strong room. 130 Sqft. (vi) Rear partition. 60 Sqft. (vii) Cost Mortice locks (with handles) 6 No (viii) Cost of Multipurpose locks for storages, drawers etc. 40 No (ix) Cost door closers. 5 No (x) Cost floor springs. 0 No (xi) Cost of Knight Latches 1 No 4(i) P/F wall paneling on alum section frame 1” x 2” placed @ 2’- 0” c/c horizontally & vertically @ 1’-0” C/C, finished with 9mm thick Bison board, 1.00 mm thick laminate as per design, the low ht paneling shall be closed with 2” x 1” MDF wood beading, which shall be polished as per color scheme. 990 Sqft. ii Making cove / box 9 deep paneling. 120 Sft. iii Pin-up board finished with cotton cloth & rubber wood beading. 40 Sqft. 5(i) Banking Counters with 1½” thick post-form factory made Tops: Providing & fixing Banking Counters (SW) as per design, 2’- 6” ht. & 3’-3” ht. (2 heights). The banking counters shall have the provision to adjust the key board, drawer, storage & complete (full length & width) shelf for CPU at bottom and foot rest. The banking counters shall be made of 19mm thick commercial board/Commercial ply, with teakwoodpolished margin / PVC margins. The counter shall be finished externally with 1mm thick laminate of approved shade / colour, handles, magnet catchers, hinges. Inside of drawers, & all internal table surfaces, storage cabinet portion etc. shall also be finished with 8mm thick laminate of approved color. 12 Rft. 6 Tables with 1½” thick post-form factory made Tops: Providing & fixing office tables with/without drawer and storage below of size 2’-4½” (wide or as mentioned in layout plan), 2’-6” (high) with the provision of key board, with sliding channels, complete (full length & width) shelf for CPU at bottom and foot rest. The table shall be made of 19mm thick commercial board/commercial ply; 1mm thick laminate on external surfaces, teak wood polished margins / PVC margins which are to be polished complete hardware such as hinges, catchers and handles. All internal surfaces of tables drawers, storage cabinet portion shall also befinished with 8mm thick laminate of approved color. 7 Side Rack with 1½” thick post-form factory made Tops: Providing and fixing side rack, 2’-3” ht. as per design. These racks shall have two drawers with storage below and be made of 19mm thick commercial board / commercial ply; 1mm thick laminate on external surfaces finished with teak wood polished margin / PVC margin, handles, catchers, hinges etc. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 18 Rft. 8 STORAGE CABINETS: with 1½” thick post-form factory made Tops: Providing and fixing storage cabinets low ht and full ht x 16 (Deep) along the walls/partitions, as per interior drawings, using 19mm board / ply for carcase, shutters, vertical and horizontal partitions, 6mm ply for the back and 1mm High Gloss laminate of approved shade on vertical and horizontal visible surfaces. The shutters shall be overlapped on the carcase. The width of the shutter shall be between 12 to 15 or as per divsion / site conditions. All the exposed edges of the board shall be provided with wooden lipping 19mm x 3mm / PVC lipping, duly polished painted in desired shade. All inner surfaces shall be provided with 0.8mm thick laminate of desired shade, design. The cabinet shall be complete with handles / knobs, and magnet catchers etc. to the satisfaction of the Architect/Engineer. 550 Sqft. 9 Cash Counters with 1½” thick post-form factory made Tops: Providing & Fixing Cash – counters 2’-9” wide, with two levels i.e. 2’-6” & 4’-0” ht. The lower portions top & all other exposed surface shall have 1mm thick laminate (inside & outside) and golas/margins. The lower portion on cashier side there will be provision of 3 nos. drawers with sliding channels of Ebco. for cash, stationery, key board, etc. rubber -wood beadings / gola etc. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 5 Rft. 10 Manager Table with 1½” thick post-form factory made Tops: 6X3 Providing & fixing Branch Manager table 2’-6” ht. size as per drgs. having drawer/s, storage cabinet, key board, with sliding channels, foot rest complete width, space for CPU, the table shall be made with 19mm thick com. Board / commercial ply externally finished with 1 mm thick laminate, hardware, such as handles, catchers, hinges etc. shall be provided as per requirement. All internal surfaces of table, drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 6 Rft. 11 Providing & fixing writing stand of size 4’-0” x 1’-0” x 1’-7 ½” high (face area) as per design drg. Made of 19mm th. Com. Board / ply, 1 mm th. Laminate with teak wood / PVC margin lipping etc. 4 Rft. 12(i) Providing & fixing notice board of size 2’-6”x 4’-0” finished with ivory colour 1mm th. laminate, 3/8x1” th. polished teak wood beading on all sides. 1 No (ii) Providing & fixing soft boards of size 3’-6”x 2’-0” (covered with openable glass shutters) on 10mm th. comm. ply 12mm th. soft board finished with cotton fabric , 1”x2” rubber wood beading. 1 No 13 Providing & Fixing cheque drop box and complaint box of size 18” x 27” laminated with 1mm th laminate internally & externally. 2 No 14 Painting work on walls & cemented ceiling in whole premises with oil bound distemper paint and enamel paint on shutters kainchi gate, grills and doors & snowcem paint on external walls with complete base preparation, complete grinding, a Oil bound distemper 2000 Sqft b Enamel Paint 500 Sqft c Snowcem paint on external walls 100 Sqft 15 P/F zebra blinds of vista / Mac of approved shade / colour. 0 Sqft. 17 Providing & supplying dressing table with mirror of size 1’- 0”x5’-0” including sitting desk for lockers room. 1 No 16 Dismantling of existing tables, counters, side racks, cash counters, wooden partitions, central AC Ducts, machines, electrical, UPS, data cabling, telephone pts, electrical fittings etc. and disposal of unwanted material, malba except reusable items. 1 JOB 17 Providing & fixing in position Aluminium Composite Paneling, partitions & rolling shutter box paneling (ACP) with framing of Aluminium Tube sections of min 1.5 * 1 and 18 gauge 2-0 C/C both ways. ACP to be in 2 width panels or distributed equally. Panels to be fixed to the frame with 3M or equivalent adhesive. Joints to be finished with Silicon based sealant (Black colour). ACP thickness of 3mm minimum. Aluminium foil thickness to be min 0.20 mm on both sides. Alstrong, ALEX, Alstone, Alcobond,prime bond or equivalent ISO certified or approved brands to be used. Shades to be as per banks approval. It has to be used for cladding, boxing over main door and both side Jam of main door and fixed glazing. Complete panelling should be of ACP. 290 Sqft. 19 MDF JAALI: Providing and fixing 12/18mm thick MDF Jali computerized cut design on columns. Back side of this jali will have milky white acrylic sheet with yellow colored LED 4’ long tube lights. 20 Sqft 20 WALL PAPER: Providing and laying wall paper as per sample approved. 40 Sqft 21 TEXTURE PAINT: Providing and laying texture paint of “Heritage” Co. “Rustic type” as per colour scheme. 0 Sqft 22 UBI LOGO: Providing , making to shape and size ( as per the design provided) and fixing to position UBI logo made out of Acrylic sheet of bank color (pre approved) including LED lights inside fixed in position, nutts bolts and hooks etc. 8 Sqft 23 P/F UBI small logos of acrylic/plastic/tape on each tables of size 6x6 10 Nos Buy back of old tables, counters, partitions (wooden/Aluminum), electrical switches & D/Bs only 1 LS TOTAL B. ELECTRICAL QTY. UNIT RATE AMOUNT (RS) S No DESCRIPTION QTY UNIT RATE AMT 1 i Providing & Fixing 2’x2’ recessed / or panel model mounted LED Luminaire LCTLR-36-CDL of Crompton / Havells / Syska. 19 No 2(i) Providing & Fixing 15 W LED ROUND DOWNLIGHTER LCND15-CDL of Crompton / Havells / Syska. 26 No (iii) Providing & fixing LED tube lights 1x20W of Philips / Crompton / Havells / Syska. 10 No 3(i) Providing & Fixing wall fans: Khaitan / Crompton Greaves / Orient. 12 No ii Providing & Fixing meattalic wall fans: Khaitan / Crompton Greaves / Orient. 0 Nos (iii) Exhaust Fans 12” Dia : 1400 rpm Heavy duty Crompton Greaves / Phillips / . 3 No iv P/F ceiling fans 48 dia of Orient/Usha/Crompton/Bajaj 2 No v P/F modular regulators for ceiling fans 2 Nos vi Supply Installation, testing & commissioning of LED STRIP light with driver and Accessories complete as required ( MS CROMPTON or equivalent of WIPRO , PHILLIPS, BAJAJ etc. Warm White Cat No. 38389 (M/S Philips) 70 Mtr 4 ELECTRICAL POINTS : Providing laying, fixing & testing of electrical points including wiring from MCB’s to switches, plate type switches, socket & M.S. Modular boxes with rust proof treatment size to accommodate the required nos. of switches & sockets plus circuit wiring from switches to lights/fans/fixtures etc. wherever required complete with earthing 1.00 mm2 multi strand wire in 25mm dia. Unbreakable PVC conduit ISI marked with specials under floor / wall & above false ceiling or making truff under / along work – stations including chase cutting, disposal of melba away from the site and repair of the same with cement mortar, copper conductor wires only will be used of approved make. 0 a) Air Conditioning wiring: Supplying & laying of Eletrical flexible cable of 5x2.5sq.mm multi strand suitable for 2.0 Tr , 1.5 Tr & 1.00 Tr H.W Split/Cassette unit (including communication wire) between Indoor & Outdoor units shall be considered as ONE length for the purpose of measurement. (Make : Havells/Legrand/ KEI/ Finolex) 6 Nos b) A/C wiring from AC D/B to indoor unit with 5 x 2.5 sq.mm. with one no. 1.5 sq.mm. insulated copper conductor of PVC insulated PVC sheathed armored cable of 1100 V (IS-1554 part I) and fixing of cable on wall with suitable size of clamps/ saddles or laid in floor/recess wall including cutting of floor/wall and making good the damages etc. 6 Nos c) P/F metal clads for A.C.s: Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 6 No d) 15 Amp wiring with 2.5mm sq. multi strand PVC copper wire with socket & switch. 15 No e) 5 Amp plug point wiring with 1.5mm sq. multi stand PVC copper wire inc. Plate switches, sockets, plugs. Etc. 10 No f) Call-bell point wiring including Ding-dong bell with 1.5mm sq. multi strand PVC copper wire including plate switches, sockets, etc. 1 No g) Electrical lights, wall fan points with 3-pin socket and switch, lights & exhaust fan point wiring with 1.5mm sq. from D/B to switches & fittings multi strand PVC copper wire including plate switches, sockets, etc. ( For payment no. of switches shall be counted). 72 No h) Signage wiring (material & labour) – P&F of 3x4mm & copper flexible wire & PVC conduiting of ISI make complete with all accessories like Saddles, bends modular switches etc. 2 No 5 UPS POINTS: P/L & testing electrical three point wiring /circuit wiring having individual circuits for computers with 2.5mm2 Multistrand copper PVC wire in unbreakable PVC conduits 25mm dia wall thickness 2mm thick with specials under floor / wall & above false ceiling including chase cutting, disposal of malba away from the site and repair of the same with cement mortar, incl. Switches & socket M.S. switch boxes with rust proof treatment size to accommodate the required nos. of Modular switches, sockets etc. & plate type sockets with indicator three in one plate including earthing with 1.00 mm2 multi strand wire complete in all respect. 0 (i) Set of 6 amp. 4 sockets & 1 switch 25 SET 6 i Copper plate earthing: Supply, fixing and termination of Copper plate of size 600x600x3mm thick with 8 S.W.G. Copper wire, all accessories such as watering pipe & funnel and providing masonary enclosure at top with cover plate i/c excavation of pit, supplying & filling of salt charcoal, refilling of pit etc complete as reqd as per IS 3043-1987. The voltage between neutral & earth must be below 1 volt with 3 mtr 20x3mm size copper strip 3 mtr below ground level. 1 set ii G.I. plate earthing: Supply, fixing and termination of G.I. plate of size 600x600x3mm thick with all accessories such as 8 S.W.G. G.I. wire, watering pipe & funnel and providing masonary enclosure at top with cover plate i/c excavation of pit, supplying & filling of salt charcoal, refilling of pit etc complete as reqd as per IS 3043-1987. The voltage between neutral & earth must be below 1 volt with 3 mtr 32x3mm size G.I. strip 3 mtr below ground level. 2 set 7 Providing and fixing of PVC conduit in wall floor including Telephone wire, M.S. box and two pin telephone sockets or R.J. – 11 plates out let incl. Testing and commissioning etc. as required. 8 No 8(i) Providing, laying, testing and commissioning CAT-VI/ Lucent / D-link computer networking cable in PVC conduit in floor or wall from server room to each table with I.O.’s (Socket) 25 No (ii) Supplying of patch chords for computers 1m & 2m length. 50 No DISTRIBUTION BOXES 9 supply, installation, testing and commissioning of factory fabricated distribution board rust inhibited, powder coated sheet fabricated comprising of incoming isolator and outgoing MCBs neutral link or neutral bus, top and bottom detachable entry earthing bolts interconnection and grouting bolts etc complete as reqd. as per details below :- (a) 10 - way SP MCBDB double door in recessed wall including cutting of wall and making good the damages comprising of 1no. 32 Amp DP and 10 no. 6/10 Amp MCBs etc. complete as reqd. (For UPS supply to tables in banking hall) 1 no. (b) 6 way MCBDB double door comprising of 1 no. 63 amp isolator DP and 4 no. 6/10amp MCBs etc. complete as reqd. (for CCTV, Security etc.) 1 no. (c) 4 way TPN MCBDB double door comprising of 1 no. 63amp isolator and 6 no. 32 amp DP MCBs ( For Acs) 1 no. (d) 4 way TPN MCBDB comprising of 1 no. 63 amp TPN and 12 no. 6-32 amp SP MCBs etc. complete as reqd. (For lighting circuits & Power Pts) 2 no. (e) P/F 4way box with 32 amp DPs for UPS input and output. 2 Nos (i) Amp Meter and voltmeter set 1 SET (ii) Kit-kats 160 Amp. With neutral link. 4 No (iii) Aluminum bus bar 160 Amp proper tinned. 1 No (iv) 160 Amp. Main switch MCCB type. 1 No v Outgoing 3-pole MCBs 63-100 Amp. 4 Nos (v) SITC of 160 Amp, 4P ON LOAD Change Over Switch with suitable size of angle iron frame suitable for installation on wall/floor including grouting of frame & painting etc. complete as required 1 job (vi) Making double-door powder coated M.S. Distribution board 3’x4’ to accommodate the above noted electrical items. 12 Sqft 11 Supply, installation, testing & commissioning of PVC insulated PVC sheathed armored cable of 1100 V (IS-1554 part 1) and fixing of cable on wall with suitable size of clamps/saddles or laid in floor /recess wall including cutting of floor/wall and making good the damages etc. complete as requd. of following sizes:- (a) 3.5x35 sq.mm. Aluminium conductor with 2 no. 8 S.W.G. GI wire (Main Electrical & Generator Cable) 30 per mtr. (b) 3.5x16 sq.mm. Aluminium conductor with 2 no. 8 S.W.G. GI wire (for AC, POWER D/Bs ) 20 per mtr. (C) 4 x 10 sq.mm. aluminium conductor with 2 no. 8 SWG G.I. wire (for LDB Panel) 20 Per mt. (d) P & laying 3x6 sq.mm. Copper conductor with 1 no. 8 S.W.G. GI wire (for UPS DBs only) 30 Mtrs 12 End termination with brass compression glands including providing lugs/ferrules and making necessary connection etc. complete as reqd. following sizes: (a) 3.5x35 sq.mm. Aluminium conductor 4 each (b) 3.5x16 sq.mm. Aluminium conductor 10 each SUMMARY 1 FURNISHING WORKS 2 ELECTRICAL WORKS TOTAL DISCOUNT, IF ANY NET TOTAL GST 18% TOTAL WITH GST (Rs. in words. ……………………………………………………………………………) CONTRACTOR UNION BANK OF INDIA (c) 4 x 10 sq.mm. aluminium conductor 10 each (d) P & laying 3x6 sq.mm. Copper conductor 14 each 13 Making double-door wooden laminated electrical almirah 3’x8’ to accommodate the above noted electrical items. 32 Sqft 14 Connectivity for the VSAT / leaselines (material & labour) – P&F of 40mm PVC conduit of ISI make including data cable of D-link & RJ-45, complete for connectivity. 2 No 15 Providing, fixing, testing and commissioning computers 32- Ports networking switch with patch panel & rack. 1 No 16(i) P/L copper pipe with complete insulation required for 1.5 ton/2.0 ton split/cassette type A.C.s from the place of external units upto the location of inside units. 360 Rft (ii) Providing and laying 25mm dia. PVC pipe heavy duty Diplast make for drainage of water of inside units. 250 Rft 17 Providing and fixing one no. amplifier (USB, Blue-tooth, Aux and Mic.) of Philips / Ahuja (DPA 570M, 50W RMS-75W Max. make and 4 nos. speakers for music in ceiling of Ahuja (CS663T 6W/100 W 6 full range)make and wireless Mike of Ahuja make with 1.00 mm2 copper wire in PVC 25mm dia pipe from the suggested place of control as per requirement. 1 Set 18 Removal & re-fixing of existing split ACs 2 Nos TOTAL 14 Connectivity for the VSAT / leaselines (material & labour) – P&F of 40mm PVC conduit of ISI make including data cable of D-link & RJ-45, complete for connectivity. 2 No 15 Providing, fixing, testing and commissioning computers 32- Ports networking switch with patch panel & rack. 1 No 16(i) P/L copper pipe with complete insulation required for 1.5 ton/2.0 ton split/cassette type A.C.s from the place of external units upto the location of inside units. 360 Rft (ii) Providing and laying 25mm dia. PVC pipe heavy duty Diplast make for drainage of water of inside units. 250 Rft 17 Providing and fixing one no. amplifier (USB, Blue-tooth, Aux and Mic.) of Philips / Ahuja (DPA 570M, 50W RMS-75W Max. make and 4 nos. speakers for music in ceiling of Ahuja (CS663T 6W/100 W 6 full range)make and wireless Mike of Ahuja make with 1.00 mm2 copper wire in PVC 25mm dia pipe from the suggested place of control as per requirement. 1 Set 18 Removal & re-fixing of existing split ACs 2 Nos
