Tender For Maintenance And Repair Works To Ward No 03, Periyamudhaliyar Chavady Mariyamman Koil Opposite 33607120226 In Kottakuppam Municipality, Villupuram-Tamil Nadu

Tender For Maintenance And Repair Works To Ward No 03, Periyamudhaliyar Chavady Mariyamman Koil Opposite 33607120226 In Kottakuppam Municipality- 1 Chipping of concrete and roughening the surface including cost and conveyance of all labour charges etc.,complete as per standard specifications. W-0036 2 Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles withminimum possible width of joints and pointing the joints with white cement mixed withmathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by thedepartmentalofficers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) 3 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 4 ABS DOOR / EQUIVALENT Specification:Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. Plain Pre-laminated Door M-0677 5 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. 6 Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1x1/8copperflat)on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection SD 126 7 Supplyandfixingof1200mm(48)weep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18) SD 106 8 Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC light point / fan point (for electronic regulator) SD 16 9 Provision for GST 18% CGST-9%,SGST-9%

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	21-08-2025	Fees Details Updation	Fee	22-08-2025

Refer document

Refer document