Tender For Supply Of Material For Anganavadi Construction Work - Stone Aggregate(Single Size):40Mm Nominal Size 2 Stone Aggregate(Single Size):20 Mm Nominal Size 3 Coarse Sand(Zone |||) 4 Portland Cement 5 Hire Charges Of Concrete Mixer 0.25 To 0., chadayamangalam-Kerala

Tender For Supply Of Material For Anganavadi Construction Work - stone Aggregate(single size):40mm nominal size 2 stone Aggregate(single size):20 mm nominal size 3 Coarse sand(zone |||) 4 Portland Cement 5 Hire charges of concrete mixer 0.25 to 0.40 cum with Hopper 6 vibrator(needle type 40 mm) 7 stone for masonry work 8 structural steel such as tees,angles,channels and R.S.joists 9 Red oxide Zinc chromite Primer 10 Adjustable telescopic prop 3m (2.02-3.75m) 11 Beam Clamp 300-380mm(450-1070mm) 12 wall form panel 1250*500mm 13 Coner angle 45*45*5mm 1.50m long 14 100mm channel shoulder 2.5m long 15 double clip 16 Single clip 17 M.S Tube 40mm dia 18 Adjustable spanESO+SI(2.35-3.40) 19 Stone Aggregate (single size): 10 mm nominal size 20 Twisted steel 21 Solid blocks of size 30*20*20cm 22 Solid blocks of size 40*20*10cm 23 Solid blocks of size 30*20*15cm 24 Anjili wood scantls 25 Mild Steel round bar above 12mm dia 26 Flats up to 10 mminthickness 27 Fine sand (zone iv) 28 Vitrified floor tile (60*60) 29 Ceramic Glazed Tiles1st quality 300*300 mm in all shades designs except White,lvory,fume red brown 30 Ceramic Glazed Tiles1st quality minimum thickness 5mm in allcolours shades and designs except burgundy,bottle green 31 Anjily wood in planks 32 Bright finished or black enameled mild steel butt hinges 100*58*1.90 mm 33 Bright finished or black enameled mild steel butt hinges 50*37*1.50 mm 34 Bright finishedor blackenameled mild steel screws 40 mm 35 Bright finishedor blackenameled mild steel screws 20 mm 36 Anjili woodplanks 37 Floatglasssheet of nominal thickness 4 mm ( weight not less than10 kg/sqm) 38 Factory made door frame size 50*47 mm with wall thickness5mm made of single piece extruded profile 39 35 mmthickfactory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished 40 powder coated M S butt hinges 100mm*58mm*1.9mm 41 Water thinnable cement primer for interior wall surface, having VOC content less than 50gms/litre 42 Plastic emulsion paint 43 Synthetic enamal paint in black or choclate shade 44 Black Japan 45 Brass mortice latch and lock 100*65mm with 6 levers and a pair of brass lever handles 46 Oxidised mild steel tower bolt(barrel type)250*10mm 47 Oxidised mild steel screws 30mm 48 200mm Aluminium aldrop 49 Iron hooks & eyes 100mm 50 Anodised aluminium handles 125mm with plate 175*32mm 51 Chromium plated brass screws 25mm 52 Black plastic seat (solid)with lid C.P.brass hinges & rubber buffers 53 Vitreous China pedestal type wate closet 54 Flushing Cistrn P.V.C 10 Its capacity (low level)(white)(with fittings, accessories and flush pipe) 55 Vitreous China flat black wash basin 630*450mm 56 15mm C.P brass tap 57 C.P brass waste 32mm 58 C.I bracket for wash basin and sinks 59 stainless steel kitchen sink - without drain board 470*420 mm bowl depth 178mm 60 semi rigid P.V.C waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fittings 61 PVC pipe 20mm outer dia 10kgf/cm2 62 PTMT-towel rail (600mm) 63 Second class teak wood in scantling 64 PVC pipe 25mm outer dia 12kgf/cm2 65 PVC pipe 110mm outer dia 6kgf/cm2 66 PVC pipe 25mm outer dia 10kgf/cm2 67 Polyethylene water storage tank with cover and suitable locking arrangements 68 PVC vent cowl 110mm dia 69 15mm PTMP bib cock 70 C.P brass angle valve 15mm 71 PTMT - soap dish/ holder 138*102*75mm 72 Mild steel tubes hot finished welded type 73 welding by electric plant 74 Mild steel round bar 12mm dia and below 75 Inter locking C.C paver block (80mm thick, M-30)

INR 2950 /-

INR 15 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB