Tender For Comprehensive Rep/Replacement To Wooden/Steel/Aluminium Joinery Wk At Mil Stn Mount Abu Under Age(I) Udaipur; 1 Taking down wooden chowkats or frames areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washingor distempering with putty as per exiting surface complete all as specified and as directed.(Note – The qouted rate shall be deemed toinclude for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ revealsincl. white washingor distempering with putty and no separate items for these shall be paid). 2 Taking down wooden chowkats or frames area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washingor distempering with putty as per exiting surface complete all as specified and as directed.(Note – The qouted rate shall be deemed toinclude for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ revealsincl. white washingor distempering with putty and no separate items for these shall be paid). 3 Taking down Shutter area not exc1 sqm each 4 Taking down Shutter exc. 1 sqm and not exc . 2 sqmeach 5 Supply and fixing Factory made 100% Solid WPC (Wood Polymer Composite) -Door Frame 90mm x 65 mm (Moulded) Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & having good screw holding capacity (Screw Withdrawal strength of (Min, 990 N) Minimum Compressive Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / Moisture Proof & Fire retardant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Charge (Material test certificate and authentication should be compulsory provided by the manufacturing company) 6 Supply and fixing Factory made 100% Solid WPC (Wood Polymer Composite) -Door Frame 125mm x 65 mm (Moulded) Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & having good screw holding capacity (Screw Withdrawal strength of (Min, 990 N) Minimum Compressive Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / Moisture Proof & Fire retardant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Charge (Material test certificate and authentication should be compulsory provided by the manufacturing company) 7 Supply andfixed 30mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified. 8 S&F IInd class (hollock) factory made 35mm thick plain, framed, panelled shutters (minimum 6 panels), with panels of timber panels are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) 9 Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including S&F bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. 10 Supplyand fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical numberand minimum 02 Nos. for horizontal member), complete all as specified. 11 S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame 12 S & F PVC factorymade shutter solid, PVC moulded prelam sheet on the front face & 2mm prelam PVC sheet on back face door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings. 13 Supply & fixedsteel windows box type ERW hollow P section comprisingdouble frame for and includinggauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grilletc all asshown in drawingCECZ TD -219 sheet 1/3 to 3/3 as applicable completeNote :- For the purpose of measurement& paymentdouble shutter with frame and grill shall be considered as one unit. (ii)Glazing,wire mesh & painting shall bemeasured & paid separately. 14 M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. 15 M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. 16 M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. 17 S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165) 18 Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete.Note : Aluminium parts will be measured and paid separately. 19 S&F in repair mortice Lock 100mm (4leaver) with all fittings for aluminium door. (Make: Godrej/Link/Harrison) 20 S&F aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. all as directed. 21 S&F 150mm long aluminium anodised handle cast type and fixed 22 S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed 23 S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed 24 S&F 100 mm long stainless steel butt hinges type C-22 with galvanised MS hinge pin etc. 25 Supply & fixed100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.. 26 S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed. 27 S&Falluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. 28 S&F in repair 75mm size hasp and staple alluminium anodaised including bolt to hinge plate and fixed with screw 29 S&F in repair peg stay of standard qualityfor steel window/ventilatorsshutter. 30 S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete. 31 S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete. 32 S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete 33 S & F Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd withgrill . including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge. 34 S&F 5.50 mm thicksheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. 35 S&F for 12 mm thick prelaminated particle board interior grade both side decorative choice laminations fixed in aluminium frame work. 36 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.(Make -Sandhu/Hardwyn/Droma/Doorking). 37 S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.(Make -Sandhu/Hardwyn/Doorking/Kelwyn) 38 Hacking out old broken glass upto tripple storey bldgs (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads. 39 S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane 40 Supply & fixing of Cabinet Shutters made out from high density PVC solid fibre board of 18mm thick duly laminate with 2mm thick prelam PVC sheet of Front face.Cut to length of size & shape as directed. ( Make: Rajshri/ Sintex.) 41 Supply & fixing of self closing Casement type hinges 90/180 degree fix at site as per the directed. (Make: Haffle, Dorma) 42 Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod. 43 Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair. 44 Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified. 45 Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern wall towall for decorative type curtain rods22 to 25mm dia as per sample as in repaie complete all as specified. 46 Material & labour for fabrication ofpressed steel cupboard shutterusing1mm thick MS plainsheet with frame 1.25mmthick bent toshape including two coat of synthetic enamel painton internal surfaces & two coat of hammer tonefinish on external surfacealongwithlocking arrangementmortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3. 47 M&L for 18/19mm thick MDF boards, interior grade, commercial type, prelaminated with decorative face both side, fixed with screws to timber frame-work 48 Demolition of RCCchajjas(reinforcement cut as required to facilitate demolition) complete as directed. 49 Material and labour for reinforced cement concrete 1:1.5:3, Type-A1(using 20mm graded agg), cast in situ, incl all scaffolding, formwork etc, whatever required for repairing partly deteriorated roof projection and chajja drops, including 5mm thick cement plaster in CM 1:3 finished to match with the existing oldplaster in accurate line & level,also includingtwo coats of weatherproof acrylic emulsion paint over a coat of primer to match the existing shade. 50 M&L for making steel window/ ventilators serviceable by welding, oiling, etc complete all as specified & directed. 51 Taking down old projected type hinges & supply and fixing in position box type hinges to steel windows/ ventilators including necessary welding, preparation of surfaces and applying two coats of sythetic enamel paint over one coat of red oxide primer complete. 52 M&L two coat of synthetic enamel paint overnew woodensurfaces of any description not otherwise described over 10cm in width or grith over primed wooden surfacesincluding preparation of surfaces compelte. 53 M&L two coat of syntetic enamel paint overnewsteel surface of any description over 10cm in width or grithnot otherwise describedover shop coated red oxide primed surface including preparation of surfaces complete.
