Tender For Repair And Maint Of Rrs Equipments/ Plant And Vehicle At Af Stn Bhisiana; 1 M&L for overhauling ofVibrator Roller including all required lathe work and spare parts required to replace as under :-(i)Oil seals (ii) Piston sleeve (iii)Oil filter (iv)Air Filter(v) Diesel Filter(vi)Piston Ring(vii) Connecting Rod(viii) Connecting rod bush (ix)CR bush(x)Crank Tukdi (xi)Head valve (xii) Valve seal (xiii) Head guide(xiv) Clutch plate(xv)Hydraulic oil (xvi) Window Sock (xvii) Window Glass (xviii) Fuse box(xix)Rubber gasketto make thevehicle fully functional and conducting required static test run, The entire work has to be completed to entire satisfaction of Engineer-in-Charge. 2 M&L for overhauling ofJCB including all required lathe work and spare parts required to replace as under :- (i)Oil seals (ii) Piston sleeve(iii)Oil filter(iv)Air Filter(v) Diesel Filter(vi)Piston Ring(vii) Connecting Rod(viii) Connecting rod bush (ix) CR bush (x)Crank Tukdi(xi) Head valve (xii)Valve seal (xiii) Head guide (xiv) Clutch plate(xv)Hydraulic oil(xvi) Window Sock (xvii) JCB Window Glass(xviii) Style Glass(xix)Side window ARG clear JCB(xx)Fuse box (xxi)Rubber gasketto make thevehicle fully functional and conducting required statictest run, The entire work has to be completed to entire satisfaction of Engineer-in-charge. 3 M&L for periodic servicing JCB (3DX)/Farm Track 70 (Loader) /Tractor/Eicher Tipper body including necessary labours required for the replacement of engineer oil, Oil filter, Fuel filter, Tighting of break, Hour meter, Control panel, front and rear indicator, locking system and made it fully ready etc, complete all as specified and directed by Engineer in charge. 4 NOTE FOR ITEM No 1 TO 3 (a) Tools required for repair of above mentioned vehicle is deemed to be included in quoted rates. (b) The replaced parts will be measured & paid separately under relevant items of schedule. (c) Replacement cost of minor parts like nuts/bolts/greasing/thimbles are deemed to be included in above quoted rates. 5 Supply/Replacement of the following items suitable for JCB (3DX), Farm Track (Loader),Tractor,Eicher Tipper Body etc :-Note :- All necessary labours required for replacing the parts/items mentioned from item No. 4.01 to 4.28. 6 Hydraulic oil 7 Hydraulic oil Filter 8 Hydraulic pump 9 Hydraulic hose pipe steel 10 Hydraulic pump flange plate 11 Engine Oil 15-40Wor as per site requirement 12 Transmission/Gear Oil 13 Air Filter Set 14 Engine Oil filter 15 Diesel Filter 16 Cabin filter 17 Coolant 18 Horn 19 Wiper Blade set 20 Head light LT and Rt side both with lamps complete 21 Indicator LT and Rtfront and rear 22 Self starter 12 Volt 23 indicator LT and Rtfront and rear 24 V-belt 25 Break Drum 26 Break shoe with lit lined shoe complete 27 Alternator for tractor 28 Clutch plate with complete kit 29 Seat cover 30 Door lock with key 31 Control cable for Accelerator/Bonnet release /break cable/clutch cable/door lock link/ Fuel lid lock cable /seat cable or any other as per site requirement 32 Replacement of connecting rod of piston ring 33 Bearing of existing sizefor Rear wheel bearing/ Pilot bearing/shook absorber/Transmission /Alternator/Big end/ Clutch release/crankshaft /front wheel, complete all as specified and directed by Engineer in Charge. 34 M&L for opening of punctured type with tube and refix the same after making puncture repaired for Eicher tipper /Tractor /JCBor equivalent any type any makefront or rear wheel complete with and including refilling of Air, complete all as specified and directed by Engineer in Charge. 35 Supplyfor distilled water for Batteries in 5 Ltr containers of best quality, complete all as specified and directed by Engineer in Charge. 36 Providing Operator for Vibrator Roller only as required and directed by Engineer-in-Charge. Note :- (a) Vibratory Roller and fuel shall be provided by the department.(b)Payment shall be made only for the operator/Driver driving the Vibrator Roller. 37 Providing Co-operator for Vibrator Roller only as required and directed by Engineer-in-Charge. 38 Providing 03 Operatorfor IMDM machine as required and directed by Engineer-in-Charge. Note :- (a)IMDM Machine and fuel shall be provided by the department.(b)Payment shall be made only for the operator/Driver driving the IMDM. 39 Provide 02 Helper for opening RAPIGROUT Bag by cutter and cleaning of RRS equipment on completion of work as required and directed by Engineer-in-Charge. 40 Replacement of lead battery 180Ah,12 V with its copper terminal complete 41 M&L for periodic servicing (After every 2000 KM run or after 03 month which occur earlier) by washing of motor cycle (Bajaj Platina/Hero CD deluxe/Royal Enfield) including the labour only for replacement of engine oil, oil filter, Disc/pad breaks, clutch wire, horn, light, indicators front & rear, locking system, speedometer, self starter, tighting of chain, battery terminal, seat coveretc, complete all as specified and directed by Engineer in Charge.Note :- (a) Tools required for repair of above vehs are deemed to be included in quoted rates. (b) The replaced parts are measured & paid separately under relevant items of schedule.(c) Replacement cost of minor parts like nuts/ bolts/ greasing/thimbles are deemed to be included in quoted rate. 42 M&L for periodic servicing (After every 8000 KM runor after 6 months which occur earlier) by washing, vacuuming of car cabin complete of LCV vehicles ( TATA mobile/Xenon/Gypsy/Dezire) including labour only for the replacement of engine oil, break oil, Gear oil, oil filter, fuel filter, tightening of breaks, clutch plate, checking of horn,Head and Tail lights, indicators, locking system, speedometer, setting of current, wheel alignment, wheel balancing, wheel rotation, suspension work and hub greasing, complete all as specified and directed by Engineer in Charge.Note :- (a) Tools required for repair of above vehicles are deemed to be included in quoted rates. (b) The replaced parts are measured and paid in the relevant of sch.(c) Replacement cost of minor parts like nuts/ bolts/ greasing/thimbles are deemed to be included in quoted rate. 43 M&L for periodic servicing(After every 8000 KM runor after 6 months which occur earlier) by washing and vacuum cleaning of cabin complete of Heavy vehicles(Eicher 10.7/Eicher tipper 10.75) including labour only for the replacement of engine oil, break oil, Gear oil, oil filter, fuel filter, tightening of breaks, clutch plate, checking horn, Head and Tail lights, indicators, locking system, speedometer, setting of current,wheel rotation, suspension worketc, complete all as specified and directed by Engineer in Charge.Note :-(a) Tools required for repair of heavy vehicle is deemed to be included in quoted rates. (b) The replaced parts are measured and paid in the relevent of sch.(c) Replacement cost of minor parts like nuts/ bolts/ greasing/thimbles are deemed to be included in quoted rate. 44 Supply/Replacement of the following items suitable for Eicher 10.75 & Eicher Tipper/TATA Mobile/Indigo/Maruti Gypsy/Maruti Dzire 45 Timing belt/Timing Chain with guide 46 V-belt/V-Rubbed 47 Front/Back break pad 48 Break repair Kit 49 Break shoe with lit lined shoe complete 50 Break Drum 51 Clutch Disc, Clutch pressure plate & Clutch kit 52 Engine oil 15W to 40W 53 Air and Oil Filter 54 Wiper blade set 55 Replacement of lead battery 88AH,12V with its copper terminal complete 56 Coolant 57 Radiator with complete set for Eicher/TATA Mobile 58 Replacement of rear tail light with LED lights 59 Indicator LT and RT front and rear 60 Front shock absorber and strut 61 Rear shock absorber and strut 62 Bearing of existing size for Rear wheel/ shok absorber/ Transmission/ Alternator/ Big end/ Clutch realse/Crankshaft and front wheel etc 63 Control cable for Accelerator/Bonnet release/Break cable/Clutch Cable/ or any other as per site requirement 64 M&L for replacement of existing unserviceable tyre with tube of Pletina/HeroMC size 3.00/17.2, complete all as specified and directed by Engineer in Charge. 65 Replacement of lead battery 7Ah for motor cycle i.e Hero Honda Spl +,Bajaj Pletina, HF Deluxe and Royal Engield as per requirement, complete all as specified and directed by Engineer in Charge.
