Tender For Provision Of Children Park Near Pt Ground At Military Station Mount Abu And Provision Of Convered Shed For Connecting Path Near Building Number Cmh-3 And Building Number Cmh-4 At Military Station Mount Abu; 1 Excavating in post holes (or similar holes) each n.exc 0.5 cm, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm thick and removing surplus soil to a distance n.exc.50m and making good surface, complete all as specified. 2 Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete of post holes, complete all as specified. 3 Supply and fixingroof trusses(framed ) trussed, purlins, crane gantries, rails and fasteningand heavy bracket framing (Beam, tee,angle, channel or flat section) including distances pieces cleats etc fixed in position conforming to Fe-410(Gde 250) complete all as specified and directed. 4 Supply & fixed mild steel, rolled sections (channel, angle or tee sections) fixed independently cut to ordinary length as in fencing post or struts in fencing and door /gate etc. including cutting tops to shape as required, drilling holes, notching for wire etc. including flat iron fillets with nuts & bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc complete all as specified and directed. 5 Supply and fixding G.I. chain link fencing of dia of wire 3.15 mm thick, G.I. coating, size of mesh 80mm x 80mm to 120mm x 120mm compete all as specified & directed. 6 Material and Labour for steel bolts, machine made, dia of neck 11 to15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed. 7 Material and Labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hookingends and binding with mild steel (annealed) wire not less than 0.9mm dia, complete all as specified. 8 Material and Labour for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified. 9 Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified. 10 Material and Labourfor surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep in hard/ dense soil and getting out complete all as specified. 11 Material and Labourfor removing excavated material/ soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. 12 Material and Labourfor returning, filling in, hard/ dense soils, including spreading, leveling, watering and well ramming in layers not exc 25 cm. 13 Material and Labourfor hardcore of broken store or boulders of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 14 Material and Labourfor 75 mm thick PCC type C-2 1:3:6 (40 mm graded stone aggregate) as in sub base finished fair and even complete all as specified and directed 15 Material and labour for 15 mm thick rendering in cement mortar 1:4 on brick wall surfaces, finished even and smooth without using extra cement complete. 16 S&F high quality mild steel stanless steel coated 3 seater bench with back support and arm support of wight not less than 25 Kgs and size not less than 1740x660x780mm of each bench. The colour and design shall be as per approval of Engr-in-Charge all as specified and directed. Make:- Nil Kamal, Godrej, Supreme 17 Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; 18 Supply & Fixing for pre-painted galvantume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as (AZ150) in roof covering/ cladding to wall, fixed with self tapping screws as specified 19 Supply and fixing steel work in tubluar truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I s 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A all as specified as directed. 20 Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colourhaving 550 Mpa tensile strength (AZ150) as in roof covering/cladding and fixed with self tappingscrews, complete all as specified. 21 Material and Labour for Testing of water from approved Govt lab samples collected from pump house No-01 at main Gate as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge, the test report includes following parameters:- PH value, TDS(mg/l), Hardness (as CaCO3) (mg/l), Fluoride (mg/l), Chloride (mg/l),Turbidity (NTU), E.Coli (cfu), Free residual Chlorine
