Tender For Repair To Steel Furniture And Painting Of Steel Furniture Of Md Accn /Otm Accn And Repair To Charpoy Gi Pipe Nylon Newar/Charpoy Gi Folding Nylon Newar Converted Into Plywood Top Under Bso (N) Pune And Kolhapur Under Ge(North) Pune., pune-Maharashtra

Repair to Steel furniture and painting of steel furniture of Md accn /OTM accn and repair to charpoy GI Pipe nylon newar/Charpoy GI folding nylon newar converted into plywood top under BSO (N) Pune and Kolhapur under GE(North) Pune.; 1 Supply & replacement of following unserviceable items of Almirah Large steel with Shelves & 1/2 S x 1/2 H complete all as shown in drawing and as directed.(Drg No. - FD-67, FD-243 & FD-1031, FD-1033) 2 Base made out of 1mm thick MS Sheet channel with ends covered into required shape 3 Brass lock 50mm 4 lever with duplicate keys approved quality 4 Cromium plated MS Handle 5 75 mm MS Hinges duly painted 6 MS Clit without bolts 7 Locking arrangement complete set of 8mm round MS Rod 8 Refixing shutter/ Shelf with necessary welding as required 9 Hanging rod of mild steel chromium plated 1.6mm thickfor Almirah Large steel 1/2H x 1/2S 10 Supply & replacement of following unserviceable items of Almirah Medium Steelwith Shelves & 1/2H x 1/2S (Drawing No FD-1032, FD-1034/FD114(M) 11 Base made out of 1mm thick MS Sheet channel with ends covered into required shape 12 Brass lock 50mm 4 lever with duplicate keys approved quality 13 Cromium plated MS Handle 14 75 mm MS Hinges duly painted 15 Locking arrangement complete set of 8mm round MS Rod 16 Refixing shutter/ Shelf with necessary welding as required 17 Hanging rod of mild steel chromium plated 1.6mm thickfor Almirah Med steel 1/2H x 1/2S 18 Supply & replacement of following unserviceable items of Book Case Steel (Drg No FD-1028) 19 Base made out of 1mm thick MS Sheet channel with ends covered into required shape 20 Brass lock 50mm 4 lever with duplicate keys approved quality 21 Cromium plated MS Handle 22 Refixing shutter/ Shelf with necessary welding as required 23 Repair of GI Charpoy Pipe 32 mm with hardtop /plywood top as shown in drawing No. FD-220. 24 Supply & fixing of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’all as per drawing and directed by Engr in Charge. 25 Supply & fixing of stiffener of size 40mmx06mmMS flat iron of 85cm (+/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’) duly spray painted 2 coat over a coat of primer complete all as specified and as directed by Engr-in-Charge. 26 M&L fordismantling of u/s GI long rail of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium gradeISI marked both end threaded and fixedall as shown on drawing. 27 M&L fordismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 1.03 above and all as shown on drawing. 28 M&L fordismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI Long Rail/short rail obtained from item No 1.03 and 1.04 Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl painting two coats of black Japan synthetic enamel paint over one coat of red oxide primer and rest as shown on drg. 29 M&L fordismantling of u/s GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing by new GI elbow 3 way of 32 mm dia medium grade with ISI markedshall be provided as shown on drawing. 30 M&L fordismantling of u/s GI check nut 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI check nut 32 mm dia 6 mm thickof best quality as shown on drawing. 31 Supply and replacement of Hardwood blocks made out of 1st Class hard wood. 32 Conversion ofCharpoy GI Pipe 32 mm Newar to Charpoy GI 32 mm plywood top as shown in draing No. FD-220. 33 (i) Removing old, torn Nylon Newar from existing charpoy GI pipe.(ii) Supply of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’.(iii) Supply of 03 (Three) nos of extra stiffener of size 40mmx06mmMS flat iron of 85cm( +/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’).(iv) Fixing of all three M S flat iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6” distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level. (v) Fixing of 7 layer12mm BWR plywood to the holes made on the M S flat iron stiffener with 9 counter-sunk flat head scres/locks nuts & bolts as directed by Engr-in-Charge.(vi)Corners ofplywood shall be rounded off and suitably holed with rose bit to prevent heads of nuts/bolts from protruding out in case bolts other than flat head are used. All four corners & bottoms of plywood to be chiselled/suitably sheared off to the extent to ensure housing of raised portion of elbow and chuk nuts, to make the plywood seat flat on rails & stiffener evenly throughout. Remaining details all as directed by Engr-in-Charge. 34 M&L fordismantling of u/s GI long rail of 25 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium gradeISI marked duly both end threaded and fixedall as shown on drawing. 35 Dismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 2.02 above and all as shown on drawing. 36 Dismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI short rail obtained from item No 2.02 and 2.03. Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl painting two coats of black Japan synthetic enamel paint over one coat of red oxide primer and rest as shown on drawing. 37 M&L fordismantling of u/s GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing by new GI elbow 3 way of 32 mm dia medium grade with ISI markedshall be provided and rest as shown on drawing. 38 M&L fordismantling of u/s GI check nut 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI check nut 32 mm dia 6 mm thickof best quality as approved by GE and rest as shown on drawing. 39 Supply and replacement of Gutkha made of 1st class hard wood for legs. 40 Supply & replacement of following unserviceable items of Charpoy GI Folding (Drg No FD-388) 41 S&F in repair removing of old nylon newar from charpoy GI folding and replacement with new new plywood 12mm thick as per IS:303 BWR grade make (Archid/ Century /Greenply) of size 6 to 6 ½ x3 (cut to suitable size to charpoy GI pipe folding) fixed with suitable type of screws and applying one coat of synthetic enamel paint complete all as specified and as directed. 42 S&F in repair removing of unserviceable plywood from charpoy GI folding and replacement with new new plywood 12mm thick as per IS:303 BWR grade make (Archid/ Century /Greenply) of size 6 to 6 ½ x3 (cut to suitable size to charpoy GI pipe folding) fixed with suitable type of screws and applying one coat of synthetic enamel paint complete all as specified and as directed. 43 S & F Hard Rubber Shoes for Charpoy legs as per Drg 44 Supply & replacement of following unserviceable items of Chair verandah complete all as shown in drawing and as directed. (Drg No. - FD-19 & FD-256) 45 Welding of broken legs joints and other joints of chair varanda as per drg 46 Removing unserviceable plastic cane & including re-canningin true Godrej pattern with 1st quality 4 mm wide and half round oval shape virgin plastic cane of white colour. The border of seat / back shall be weaved with 4 mm wide 1st quality virgin plastic cane (white colour) complete all as specified and directed:- Note: The re-canning shall be carried out only after finishing painting of item as required. 47 S & F Hard Rubber Shoes for legs of chair varandah as per Drg 48 Supply & replacement of following unserviceable items of Chair CB with / without arms complete all as shown in drawing and as directed. (Drg No. - FD-75) 49 Welding of seat frame with legs of chair CB without arms. 50 MS flat iron 25 x 3 mm of 50 mm length and including welding & spray paint with 2 coats of synthetic enamel paint over a coat of primer. 51 Seat frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete. 52 Back frame made out of teak wood and including two coats french polish and canning for chair CB with armscomplete. 53 Seat frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete. 54 Back frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete. 55 Hand rest made out of teak wood and fixed with screws and including two coats french polish for chair CB with arms complete. 56 Fixing only existing serviceable arms with new screws and including one coat french polish for chair CB with arms complete. 57 Hard rubber shoes 58 Supply & replacement of following unserviceable items of Locker Bed Side steel complete all as shown in drawing and as directed. (Drg No. - FD-257 & FD-1029) 59 Base made out of 1mm thick MS Sheet channel with ends covered into required shape 60 Brass lock 50mm 4 lever with duplicate keys approved quality 61 Cromium plated MS Handle 62 75 mm MS Hinges duly painted 63 MS Clit without bolts 64 Locking arrangement complete set of 8mm round MS Rod 65 Refixing shutter/ Shelf with necessary welding as required 66 Hanging rod of mild steel chromium plated 1.6mm thickfor Almirah Large steel 1/2H x 1/2S 67 Supply and replacement of following unserviceable items of Table 900 x 600 (3x2)with/ without Drawer Steel(Drg- FD-1008 & 1007) 68 Supply and replacement of table top : Supply and replacement of top made out of 18 mm thickprelaminated particle board as per drg. 69 Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 70 Long railmade out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 71 Short railmade out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 72 Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 73 Locks with duplicate keys 74 Supply and replacement of hard rubber shoes : Hard rubber shoes shall be of superior quality. 75 Supply and replacement of following unserviceable items of Table 3 x 3 steel (Drg - FD-1009) 76 Supply and replacement of table top : Supply and replacement of top made out of 18 mm thickprelaminated particle board as per drg. 77 Supply and replacement of hard rubber shoes : Hard rubber shoes shall be of superior quality. 78 Repair of Table Dining ORs Aluminium Top (Drg - FD-165 (M) 79 S&F of leg made out of square pipe 25mmhaving wall thickness 1.6mm complete, rest all as shown on drg and as directed by Engr-in-Charge. 80 M&L forwelding of broken joints of Table Dining ORs complete, rest all as shown on drg and as directed by Engr-in-Charge. 81 S & F Top of the table dining OR,s made out of 18mm thick plywood BWR with 22 gauge aluminium sheet of top, rest all as shown on drg and as directed by Engr-in-Charge. 82 S&F Hard PVC/rubber toes of superior quality as specified and as directed by Engr-in-charge. 83 Supply & replacement of following unserviceable items of Table Officers Steel complete all as shown in drawing and as directed. (Drg No. -FD-1003) 84 Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 85 Long rail made out of 25 x 40 x 1 mm mild steel U section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 86 Short rail made out of 25 x 40 x 1 mm mild steel U section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 87 Small Drawer including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 88 Top made of 18 mm thick prelaminated particle board,one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. 89 Lock with duplicate keys 90 Hard plastic shoes. 91 Supply & replacement of following unserviceable items of Table Clerk Steel complete all as shown in drawing and as directed. (Drg No. - FD- 84 & FD-381, FD-1004):- 92 Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 93 Long railmade out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 94 Short railmade out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 95 Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer. 96 Top made of 18 mm thick prelaminated particle board,one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. 97 Locks with duplicate keys 98 Hard plastic shoes 99 Repair of CHAIR REVOLVING HIGH BACK/LOW BACK/ EXECUTIVE /COMPUTER /VISITOR/NET SEAT & BACK CHAIR (Drawing No. TP) 100 S & F in repairs of maintenance free Gas lift for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. 101 S & F in repairs ofPadestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin isof press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. 102 S & F in repairs of twin wheel castorsfor all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge (Set of 5 twin castor wheels will be measure as 1 set). 103 S & F in repairs of PU/Fabricseat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. (Set of 1 seat and 1 back will be measured as 1 set) 104 S & F in repairs of handles of chair revolving made of blackintegeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolvingwith arm rest all as shown on drg and as directed by Engr-in-Charge. 105 Supply & replacement of following unserviceable items of Teapoy verandah complete all as shown in drawing and as directed. (Drg No. - FD-383) 106 Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete. 107 Hard rubber shoes 108 Welding in joint of the Legs and Frame of Teapoy Verandah alongwith supply and fixing of MS Cleat where ever required all as per drawing and directed. 109 Removal of existing worn out paint from inside & outside including preparation of surface complete of the folloeing steel furniture and M&L for applying two coats of 1st quality synthetic enamem paint smoke gray/ Olive green/white over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. 110 Almirah Large Steel with Shelves & 1/2H x 1/2S 111 Almirah Medium Steel with Shelves & 1/2H x 1/2S 112 Book Case Steel 113 Chair CB with/ without Arms Steel 114 Locker Steel 115 Table Office Officer Steel 116 Table Office Clk Steel

INR 500 /-

INR 48.99 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB