Tender For Development Of Taluk Hospital Parassala – Furniture Work - Furniture 2 Supplying And Placing Mesh Back Chair- Mesh Back With Lumbar Support, Breathable Mesh Synchro 1Mechanism 1D Adjustable Arms With Soft Armpad Nylon Base With Nylon Castors , parassala-Kerala

Tender For Development Of Taluk Hospital Parassala – Furniture Work - Furniture 2 Supplying and placing Mesh Back Chair- mesh back with lumbar support, breathable mesh Synchro 1Mechanism 1D adjustable Arms with soft armpad Nylon Base with nylon castors and Fabric Upholstered Cushion Seat Class 4 gaslift Chair tested as per Bifma X5.1 standards. including all charges etc complete. 3 High back chair(x-ray department)<br>Chair -Highback :- The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric. Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad and adjustable headrest. The moulded polyurethane foam for seat is with density=50-55 kg/m ³.The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest has button operated height adjustment.The arm top is made of soft moulded PU with MS .The mechanism of chair shall have followingfeatures:360 degree revolving type, Synchronous 1 Mechanism.The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be injection moulded in black GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards.The upholstery shall be fabrics with 100% polyester.The product shall be BIFMA compliant.The product shall be of approved make and colour. 4 PATIENTS REVOLVING STOOL FULL SS 304 Features, Specification and Accessories : Round revolving top, dia 300mm, made of SS304 sheet of 1.2mm thickness. Four legged stool, made of dia 25mm SS304 round tubes of 1.2mm thickness, mounted on central base pipe of dia 50mm SS304 round pipe with 1.6mm thickness. Height adjustable by screw thread rod mechanism. Overall size(Approx.): 350 Lmm x 350 W mm x 520- 635 Hmm. 5 AlmirahMaterial using IS 710 BWP Marine Ply Wood Lamination using 1 MM . The ply wood with lamination shall be hot / cold press machine required.Interior lamination using .8 MM .All the visible edges are covered with 2x22MM & .5x22MM PVC Edge band wherever required. Back Panel using 9MM thick BWP Grade marine plywood IS 710 grade marine ply wood with .8 MM thick interior lamination. Hardware using 90 Degree Soft Close Hinges , Multipurpose lock, D Handles etc Make - Ebco. Unit fully installed by knockdown fitting - Minifix system Size vary from Length 80cm -240cm, Width 45CM, Hight 90cm to 210cm. Size considered here 90x45x210cm x 28 Nos. 6 Steel rack - Supply and installing steel Slotted Angled Iron Rack with 6 Pannel(Size considered here: 1800x900x380 cm) 20g 7 Visitor chair (single):Providing and installing in Position Medium Back Visitor Chair with the following specifications. Seat and Back shall be Fabric upholstered/Mesh Back with 100% Polyester and weighing 320 GLM. Seat Foam shall be made out of PU foam with a density 50-60 Kg/m. Base shall be Mild Steel 4 Legged base powder coated mounted on PVC bush. The Back rest shall be of dimension 610mm (H) X 425mm (W). Seat Size shall be of dimension 455mm (W) X 480mm (D). The product shall be BIFMA compliant. 8 Supplying and placing Rectangular Table with 1500mm (W)*750mm(D)*740mm(H)/side table 900*450*740 mm and made of 25mm thick PLPB table top with 2mm thick PVC edge banding. Under structure made of 25 mm thick PLPB legs and 18 mmPLPB modesty panel. including all charges etc complete. 9 Airport chair<br>Three seater perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powdercoated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel . The Shell shall be assembled on the Cross Beam with help of bolts . Seat width- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats is 2cm. Overall Dimensions shall be Seat Height - 40.6 cm,Height - 77.5cm, Width & Depth of Chair as measured from ground- Width 176.5 cm and Depth-71cm.Dimensions tolerance / variations shall +/- 1cm. 10 Providing and installing curtain rod frame with curtain cloth. Curtain rod using Aluminium frame with cloth upto a height of 220CM.

INR 2950 /-

INR 41.94 Lakhs /-