|
| 1 | Schedule \"A\" |
| 2 | Dismantling of plain or corrugated steel sheeting any gaugethickness including nainital or similar pattern on roof covering complete all as specified and directed. |
| 3 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F pre- painted galvatume aluminum zinc coating GI basedsteel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed. |
| 5 | S&F 0.63 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing ofcoating 275 complete all as specified and directed. |
| 6 | Dismantling of boards of any description fixed in any position with nails/screwincluding cover fillets complete all as specified and directed by Engr-in- Charge. |
| 7 | S&F in repairs forexposed GI powder coated snap grid frame work for false ceiling of grid size 600X600mm comprising of wall /cleat angle of size 24X 38X0.70mm with 4mm dia GI providing 4mm thick \"E\" board in ceiling with galvanised iron snap frame of \"T\" Section 24x38x0.70mm wall/cleat angle 25x25x0.35mm thick and hanging with 2mm GI wire all fixed arrangement will be done as per manufacture instruction and including two coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 8 | M&L for 4mm thick plywood (no of ply 03), grade BWR,type BB fixed with nails or screws to timber frame work complete all as specified and directed. |
| 9 | M&L for filleting in any position and to any shape, sectional area exe. 25 Sqcm but n. exe. 50 Sqcm in cement mortar (1:4) including all miters, stops etc, complete all as specified and directed. |
| 10 | M&L forSecond class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give20mm laps and fixedcomplete all as specified and as directed. |
| 11 | Dismantling of unframed timber scantling40 sq .cm and over in section,in any position complete all as specified and directed. |
| 12 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provide complete all as specified and directed. |
| 14 | S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. |
| 15 | M&L for preparation of newlypainted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 16 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 17 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 18 | M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M & L for rendering 10mm thick plaster incement mortar (1:6) on fair faces brick work or concrete surfacesfinish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand) |
| 21 | M&L for rendering 15mm thick in CM 1:4 onon fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all asspecified and directed.Note :(i)WPC will be measured and paid separately. (ii)using Dimapur Sand for plaster. |
| 22 | Supply only intergral water proofing compound complete all as specified and directed |
| 23 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil based distemper emulsion paint over a coat of primer complete all as specified and as directed |
| 24 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primercomplete all as specified and directed. |
| 25 | Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to distance 50 mtrs complete all as specified and directed. |
| 26 | M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick work in CM (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement all as specified.(Using Dimapur Sand)(Note: Integral water proofing compound shall be measured and paid separately.) |
| 28 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laying on primed surface by forced application complete all as specified and directed. |
| 29 | M&L for applying twocoats ofhot industrial bitumen 85/25 grade at the rate of 1.70 kg per sq.m over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc aftercovering joints with PCC 1:2:4 complete all as specified and directed |
| 30 | M&L for two coat of Aluminium paint over APP based polymeric membrane or surfaces of any description , over 10 cm width or girth not otherwise described all as specified and directed. |
| 31 | Dismantling Water tanks & removing from site to store, capacity of tanks exc 250 litres & n. exc. 500 Litres capacity each complete all as specified and directed. |
| 32 | Dismantling Water tanks & removing from site to store, capacity of tanks 500 ltr and n exc 1000 ltr complete all as specified and directed. |
| 33 | S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections likeball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed. |
| 34 | S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections likeball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed. |
| 35 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 250 litrs n exc 500 litrs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 36 | M&L in repair to prelaminated particle board 18/ 19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for working table / storage almirah, cabinets, cupboards, racks and wall panelling to the size and pattern complete all as specified and directed. |
| 37 | M&L in repair to prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for working table / storage almirah, cabinets, cupboards, racks and wall panelling to the size and pattern complete all as specified and directed. |
| 38 | S&F aluminium anodised Hasp and staple 75mm , safety type,mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 39 | S&F 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | M & L forNon skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and includig 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 42 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed. |
| 44 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick inCM 1:3 complete all as specified and directed. |
