}

Tender For Supply And Construction Of 01 X Ug Fdc, jammu-Jammu And Kashmir

Indian Army has published Tender For Supply And Construction Of 01 X Ug Fdc. Submission Date for this Tender is 29-08-2025. Fabrication Work Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

50745110
Tender For Supply And Construction Of 01 X Ug Fdc
Tender
Indian
Jammu And Kashmir
Jammu
29-08-2025

Tender Details

Tender For Supply And Construction Of 01 X Ug Fdc; 1 Fabrication, construction and Installation of Underground FDC size 20x10x10Ft with MS Steel work with Base plate, Nut and bolts including MS steel door with plain sheet size 2.1x1.2m with paint finish of two coat of synthetic enamel paint over one coat of red oxide primer. Make: Tata/Sail/Jindal or ISI marked Note : Electric supply arrangement for all fabrication and welding work will be done by Contractor at his own management and expenses. Nos 01 2 Excavating over areas, 3.15 m deep and getting out in hard/dense soil. Hard strata should be available at the place of excavation else suitable location will be proposed for construction of the structure. 3 Removing excavated material of soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point 4 Foundation . Column foundation shall be as per Sketch R. 5 Columns. The 16 Nos main columns will be made out of ISMB of size 200x100mm and will be fixed using MS end plate 250x250x10mm thick at top and 4 Nos 12mm dia, 50mm length nut & bolts at top level. The column shall be welded with 300x300x10mm thick MS plate at bottom and shall be fixed to the foundation with 4 Nos bolts 16mm dia 450mm long through this plate over 450mm PCC 1:2:4 column. Make: TATA/SAIL/JINDAL or ISI marked 6 Truss. 06 Nos of Truss shall be made of ISMB section of size 100x70mm. The trusses are provided at a distance of 1.2m c/c and shall be supported on suitable columns. Two Nos MS plate of size 250x250x10mm thick should be welded to each truss to tie with top plate of the columns. Suitable arrangement of 150x150x8mm thick cleats with nos 04 drilled holes of dia 12mm for fixing purlins. As per Sketch. Make: TATA/ SAIL /JINDAL or ISI marked 7 Purlin. The purlins will be fabricated out of ISMB steel sections of size 100x70mm with 150x150x8mm thick cleats welded at both the ends with 04 Nos drilled holes of dia 12mm with 04 Nos 12mm dia 40mm length suitable nut and bolts for fastening. As per Sketch Make: TATA/SAIL/JINDAL or ISI marked 8 Wall cladding of 50mm thick Bison panels with tongue and groove joints. 9 Roof. Roof top of 5mm thick chequred plate with two half grooved single corrugation at both the ends to avoid ceiling leakage. 10 Over Head protection to be provided as per sketch R with 0.63mm PPGI sheet at top alongwith projection of 600mm alaround the structure. 11 PPGI Roof Sheet for entrance 0.63mm as per Sketch S. 12 HDPE/PP OG color woven Sand Bag of size 830mm x 350mm with rope. 13 HDPE sheet OG colored 300 GSM over APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced appplication. 14 Ordinary Portland Cement grade 43, IS-12269-1990, packed in 50 kgs HDPE bags conforming to ISI 1652/2000. Make : ACC/AMUJA/BIRLA/ULTRA TECH 15 River Sand: Sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities. The maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per IS-383-1970. 16 40mm Stone Aggregates Stone aggregate shall be crushed stone 40mm graded conforming to IS-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 17 20mm Stone Aggregates Stone aggregate shall be crushed stone 20mm graded conforming to IS-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 18 63mm Stone Aggregates Stone aggregate shall be crushed stone 63mm graded conforming to IS-383 -1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities. 19 Common building brick sub class A of size 23cm x 11.5cm conforming to IS 1077-1986. Average compressive strength not less than 15N/MM2. 20 Portable, Collapsible protective wall baskets (Hesco Basket), galvanized welded mesh frame (2 cells per set) 4mm dia of size length 4.0 feet, width 2.0 feet and ht 4.0 feet to be filled by PCC 1:5:10 as per drawing attached. The cage box have innerlining of non-woven geotextile Khaki colour. The geo textile will be 2.5 mm thick 250 GSM in heavy duty non-woven polypropylene. Make-Confirming to IS code 13162 (1992) 21 Aluminium Ventilator 450x350MM Nos 02 22 Cement panel board for wall panneling 8ftx3ft 23 Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15mm thick screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match Make: Kajaria/Somany /Jhonson 24 PVC sheathead copper cable 1.5 Sqmm single core with multistrand 1100 Volts grade as per IS 1554 Make: Anchor/Plaza/Havells Roll 40 25 Casing Capping ¾” length 10’ size Make: Ajantaplast/ Anchor/Havells Nos 360 26 PVC tee 3/4 Make: Ajantaplast/ Anchor/Havells Nos 100 27 PVC Cashing caping coupler of size 3/4 Make: Ajantaplast/ Anchor/Havells Nos 220 28 Ceiling Rose PVC. Make: Anchor/Plaza/Havells Nos 80 29 Switch Piano moduler type 10 Amp one way. Cat part No 21011 Make: Anchor/Plaza/Havells Nos 110 30 Switch Piano moduler type 20 Amp one way. Cat part No 21066 Make: Anchor/Plaza/Havells Nos 40 31 Socket 10 A modular type. Catpart No 21113 Make: Anchor/Plaza/Havells Nos 04 32 Socket multipurpose 3 pin 10 and 3 pin 20 Amp modular type of 2 module. Cat part No 30828 Make: Anchor/Plaza/Havells Nos 04 33 PVC elbow 3/4 for casing caping Make: Ajantaplast/ Anchor/ Havells Nos 16 34 Tape insulation 10 Mtr. Make: Anchor/Plaza/Havells Roll 02 35 Solid plate with base frame suitable for surface plastic box of 4 module Catpart No 30249WHMake: Anchor/Plaza//Havells Nos 02 36 Solid plate with base frame suitable for surface plastic box of 3 module. Catpart No 30238WH Make: Anchor/Plaza/Havells Nos 07 37 PVC Square Block. Make: Ajantaplast/ Anchor/Havells Nos 20 38 MCB DB SPN 8 ways double door 240 V with bus bar as per IS 8628 . Make: Anchor/Plaza/Havells Nos 01 39 MCB 20 Amps SP,240 V. as per IS 8623 Make: Anchor/Plaza/Havells Nos 02 40 MCB 10 Amps single pole 240 V as per IS 8628 .Make: Anchor/Plaza/Havells Nos 02 41 Isolator 40 Amp DP 240 volts Make: Anchor/Plaza/Havells Nos 01 42 PVC Copper Cable PVC 2.5 Sqmm S/C multistrand as per IS 694 Make: Anchor/Plaza/Havells Roll 02 43 Steel Screw full threaded 1/2 Best quality ISI marked(100 Nos) Pkt 01 44 Steel Screw full threaded Screw 1 ISI marked(100 Nos) Pkt 02 45 LED Tube light fitting 20 watt, Ultra bright glass shell, glare fee, wide angle, double side connection retofit LED tube G 13 lamp holder complete with fixing accessories. Make : BAJAJ/PHILIPS/HAVELLS Nos 04 46 LED 9W with holder. Make : BAJAJ/PHILIPS/HAVELLS Nos 04 47 Wall mounted Fan complete with electronic regulator and accessories 230V 300mm sweep with wire hook. Make : USHA/HAVELLS/BAJAJ. Nos 02 48 Changeover switch indoor 220/240V Make: Bajaj/Havels/Philips Nos 01 49 15 Amp switch socket combination 240 volt along with gang box. Make : ANCHOR/HAVELLS/BAJAJ. Nos 02 50 20 Amp switch socket combination 240 volt along with gang box. Make : ANCHOR/HAVELLS/BAJAJ. Nos 01

Key Value

Document Fees
Refer document
EMD
INR 22500.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents-1 0 KB
Click here to download tender document Tender Documents-1 0 KB
Click here to download tender document Tender Documents-1 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail