Tender For Addn/Altn Of Bathroom Of Bldg No P-383 And P- 384 Of 21 Corps Pro Unit At Dronachal Under Ge Dronachal; 1 M & L for preparing newly/oldplastered surface ofwalls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification over acoat of waterproof putty with complete removal of existing paint etc complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items. 2 M&Lfor applying 1-2 mm thickwhite wall putty on walls complete all as specified and directed. 3 M & L for preparingold or unplastered surface ofceiling and applying two coats of white wash on ceilings complete all as specified and as directed. 4 M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B0 12.5mm graded aggregate complete 5 Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed 6 S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedcomplete all as specified and as directed. (minimum thickness of powder coating 50 micron) 7 Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. 8 M&L for granite (any type) 18-20 mm thick machine cut in steps, jambs, cooking platform , window cills and similar worksincluding 15mm thick screed bed in CM 1:4and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcuing grinding and polishing types completeall as specified and directed. 9 Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 10 M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed. 11 M&L for 15 mm thick rendering over fair face or other than fair face brick or concrete surface in cement plaster 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. 12 M&L for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door/window frames and in bed blocks etc complete all as specified and as directed. 13 Dismantling of stone slabs and tiles of any description or thickness in floors & aprons etc laid over bedded and pointed in any mortar complete all as specified and directed. 14 M&L for coloured tiles in vertical surface450X300X7mmthick set and jointed over and including 10 mm thick rendering even and rough in CM 1:3 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. 15 M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick joint free, (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15 cm in CM (1:6) complete all as specified and directed. 16 S&F in repairs vitreous china wash down water closet (EWC) 1st qualitywith seat cover and trap incl connection to drain pipe or outgoing pipe and flushing pipe etc complete, waste pipe,sheet covers & fittings (complete set)and fixing complete all as per manufacturer instructions and as directed by Engr-in-Charge. 17 S&F in rpr Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 18 S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. 19 S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed. 20 S&F in repairs Toilet paper roll holder chromium plated fixing complete all as specified and directed by Engr in charge. 21 S&F in repairsapprox size 2.4x0.60 m looking mirror approved quality with wooden back and edge beading, complete with polishing fixed with screws to wall, complete all as specified and directed. 22 S&F in repairs chromium plated/SS grating square slit 150 mm dia with or without waste hole complete all as specified and directed. 23 S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mmfixing complete all as specified and directed by engr in charge. 24 M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75 mm bore complete all as specified and direcetd. 25 S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore fancy type complete all as specified and directed r all as specified and directed. 26 S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 27 S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. 28 S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut, screwed down, screwed for iron pipe or union complete as specified and directed. 29 Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 30 Supplying and laying20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. 31 Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 32 Supplying and laying16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. 33 M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 75/110 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified. 34 S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed/ laid in trenches/floors with nahani or gully or multi junction or reducers etc trapin floors/walls fixedcomplete all as specified and directed. 35 S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed in walls / laid in trenches/floors (with nahani or gully etc trap while laid in floors) fixed with MS clamp complete all as specified and directed. 36 S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 37 S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed. 38 S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed. 39 M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. 40 Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)(unreinforced)complete all as specified and directed. 41 S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. 42 S&F inrepairs 15 mm SS Pillar taps of long body any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) fixed all as specified and directed. 43 S&F in rpr for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm45gms/40mm-60 gms) incl waste pipe incl all complete fitting all as specified and directed 44 S&F in rpr for Urinal spreader of SS for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed. 45 S&F in rprBrasschromiumplatedshower rose 125mm sizeChromium plated shower roseswith or without swivel joints, any size, including fixing to steel pipe or union complete 46 S&F forSheet glass, tinted ordinary quality for fixing in window or where required complete all as directed 47 Demolition of reinfored cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) 48 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC Sheet on both side PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both sidePrelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edgeswelded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. 49 S&F for 150 mm Aluminium handles, cast type,anodised, complete all as specified and directed 50 S&F 150 mm Mild steel barrel towerbolts, stove enamelled black, with bright bolt and fixed and fixed complete all as specified and directed. 51 S&F 100 mmButt hinges, extruded brassISI marked, compound complete all as specified and directed. 52 S&FSolid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete 53 Taking down carefully copper/aluminium point wiring from woodenbattan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc. 54 Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed. 55 M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall& including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVCinsulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as specified and as directed 56 One light/fan point controlled by one way switch ( switch to be measured and paid separately) 57 One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVCinsulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete (socket and switches to be measured and paid separately) 58 S & F in replacement switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. 59 S & F in replacement switch Modular type 16 Amps 1Way, 1 module with indicator modular plate light marking 230V AC complete all as specified and directed by Engineer in charge. 60 S & F in replacement Modular socket outlet 2/3 pin 6/16Amp universal socket 2 module complete all as specified and directed by Engineer in charge. 61 M&L ceiling rose 3 phase PVCpolycorbonate,isolated body complete all as directed. 62 S & F in replacement of modular white cover plate with frame, 6 moduleISI marked complete all as specified and directed by EIC. 63 S & F in replacement of modular white cover plate with frame, 3 moduleISI marked complete all as specified and directed by EIC. 64 S & F in replacement LED batten luminaire surface mounted ,4 feet system wattage 20 Watts with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection 2.5KV , IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 Degree, system efficacy at luminarie level > 120 Lumens/watt, filcker freeandincluding connecting up with PVC sheathed suitable sizecopper conductor flexible wire from ceiling rose to fitting completeallas specified and directed. 65 S & F in replacement LED batten luminaire surface mounted 2 feet system wattage 10 watts and not less than 1200 lm with life time of 50000 burning hours with . CRI > 80, power factor > 0.95, THD < 10%, color temperature - 6000 to 6500 K , surge protection 2.5 KV , IP- 20 protected meets LED IS specifications, Class - 1,short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt, filcker free and including connecting up with PVC sheathed suitable size copper conductor flexible wire fixed complete all as specified and directed. 66 S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan completeall as specified and as directed.
