|
| 1 | Supply and Fabrication,erection and alignment of structural steel with ISMC /ms plate/ built up section( Grade of Steel Y-210) / combination of both conforming to IS:2062, Pipes /SHS/RHS conforming to IS:1161/ IS:1239 for mild steel square, MS Plateform,ladders, Bracing including anti corrosion MS primer coat and paint etc(Primer coat are to be applied before fabrication in the fabrication yard.). in columns, beams, portals, hangers, struts, stiffeners, brackets, stub columns, bracings, cleats, base plates, splice plates, walkway platforms, hand-rails etc with ,fabrication, straightening, cutting, bending, rolling, grinding, machining, drilling, welding, electrodes and other consumables, alignment, erection bolts and nuts , inspection of welds, visual inspection, non destructive Test, rectification and correction of defective welding works, , protection against damage in transit, stability of structures, setting column bases. All welding work shall be carried out at specified location in site with necessary equipments. Make list of electrodes are Manglam. Advani and ESSAB E7018/ E6013 Or as per instruction of engineer-In charge.( Make list- TATA, SAIL, JINDAL, RINL)SHS 63mmX63mm*3mm SHS 40mmX40mm*3mm Base Plate 200x400x12mm Anchor bolt dia 16mm length 440mmProviding and anchoring in position high strength 16mmand standard lengths including necessary Foundation up to required depth , anchoring and grouting with RCC base foundation with 12mm TMT bar) necessary equipments etc., complete as per specifications of agency Base L 2mtr X Width1.5 mtrX height 1.2 mtr (As per Drawing)3mm ACP (Aluminum Composite Panel) sheets are composed of two thin aluminum sheets bonded to a non-aluminum core, typically polyethyleneColor as per directed by engineer - in - charge LED Module : OSRAM BA-L-CX_-880-G5 or equivalent make with prior approval of EICIP Rating : IP66 Power Consumption : 1.5 watt,Luminous intensity : 150 lm(Typ.) Operating Temp : -25-80 DegreeLife Span: 50000h Power supply module make : Union ELECOM or equivalent make with prior approval of EICOperating Voltage : 90 - 265V Output Voltage : 12V Power rating : 300W Output current : 25A Overload protection : Yes , 110% of capacity. IP Rating : IP67 Warranty : 5 YearsLandT GIC Daily Weekly Programmable Electronic Crono Timer Switch 110240 VAC Crono Time switch,110 - 240 VAC (50/60 Hz),1 C/O (SPDT) Cat.GIC Daily Weekly Programmable Electronic CronoTimer Switch 110 240 VAC Crono Time switch,110 - 240 VAC (50/60Hz),1 C/O (SPDT) CatGi conduit for cable as required Silicon for sigange Sililing-Make : Dowsil or equivalent make with prior approval of EICGrade : 789 All weather purpose waterproof sealing- All temperature gunability- Primerless adhesion- Long-life reliability ( -50°C to 150°C)Including transportation, fixing labour charges etc. |
| 2 | Supply and Installation direction signages for the University campus at various locations of size 4ft(L) x 2ft(W) complete in all respect (incl. MS frame structure embedded in ground) having following specifications:- Supply and Fabrication,erection and alignment of structural steel with ISMC /ms plate/ built up section( Grade of Steel Y-210) / combination of both conforming to IS:2062, Pipes /SHS/RHS conforming to IS:1161/ IS:1239 for mild steel square, MS Plateform,ladders, Bracing including anti corrosion MS primer coat and paint etc(Primer coat are to be applied before fabrication in the fabrication yard.). in columns, beams, portals, hangers, struts, stiffeners, brackets, stub columns, bracings, cleats, base plates, splice plates, walkway platforms, hand-rails etc with ,fabrication, straightening, cutting, bending, rolling, grinding, machining, drilling, welding, electrodes and other consumables, alignment, erection bolts and nuts , inspection of welds, visual inspection, non destructive Test, rectification and correction of defective welding works, protection against damage in transit, stability of structures, setting column bases. All welding work shall be carried out at specified location in site with necessary equipments. Make list of electrodes are Manglam. Advani and ESSAB E7018/ E6013 Or as per instruction of engineer-In charge.( Make list- TATA, SAIL, JINDAL, RINL) (i) SHS 63mmX63mm*3.2mm (ii) SHS 40mmX40mm*2.6mm 3mm ACP (Aluminum Composite Panel) sheets are composed of two thin aluminum sheets bonded to a non-aluminum core, typically polyethylene Color as per directed by engineer - in - charge. Letters A garde cast acrylic letter cutting on cnc laser machine with 3M Double side tape Gi conduit for cable Silicon for sigange Sililing- Make : Dowsil or equivalent make with prior approval of EIC Grade : 789 All weather purpose waterproof sealing - All temperature gunability - Primerless adhesion - Long-life reliability ( -50°C to 150°C) Including transportation, fixing labour charges etc. |
| 3 | Supply and fixing of University Directory having floor wise detail of rooms, deptt. Etc. to be installed/fixed on wall having following specifications complete in all respect with prior approval of EIC (incl. designing of directory):-Supply and Fabrication,erection at site Base Sheet: 8 MM Toughened / Tempered glass is a safety glass that has undergone processes of controlled thermal treatment to increase its strength. Safety Film: Garware 7 Mil Safety Film or equivalent with prior approval of EIC , are optically clear, transparent, high impact resistant Polyester Films, which once installed on glass, gives additional strength to glass, reduce glare and prevent glass from splintering on impact. Avery Dennison(MPI Versa White) Graphics Solutions reports or equivalent with prior approval of EIC , offers a versatile, lustre finish for short-term promotions and is suitable for both indoor and outdoor applications on flat surfaces. Avery Dennison® PC 500 Promotional Calendered Series or equivalent with prior approval of EIC Opaque Black Permanent Kraft cnc Plotter cutting as per design.Stud For Glass : Stainless Steel SS Point Fitting GlassStud, Size: 1 Inch |
