Tender For Procurement Of Furniture For Sihm Bolangir, bolangir-Odisha

Procurement Of Furniture For Sihm Bolangir , Supplying Fitting And Fixing Of Full Back Executive Chairs Are Of Size 76.3 (W) X 76.3 (D) X 99.5 - 110.5 (H) X 43.3 -54.3 (Sh) Cm . The Seat Assembly Is Made Up Of 1.2 +0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam Of Size 47.0 Cm. (W) X 48.0 Cm. (D) .The Back Asembly Is Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of B2.54 +0.03Cm.X 0.2 +0.016Cm.Thk.Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Is Upholstered Using Net Fabric With High Tenacity Yarn Of Size46.5 Cm. (W) X 60.5Cm. (H) . The Hr Polyurethane Foam Is Moulded With Density =45+/-2 Kg/M° And Hardness Load 16 + 2 Kgf As Per Is:7888 For 25% Compression.The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.The Mechanism Is Designed With The Following Features: • 360° Revolving Type. • 17° T2° Maximum Tilt On Pivot At Centre • Upright Position Locking. • Tilt Tension Adjustment. The Powder Coated (Dft 40-60 Microns) Tubular Frame Is Cantilever Type & Made Ofb2.54 +0.03Cm.X 0.2 +0.016Cm.Thk. M.S. Er.W. Tube. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 +0.3Cm.The Bellow Is 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.The Pedestal Is Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 6C.3 +0.5Cm.Pitch-Center Dia. (76.3 +1.0Cm With Castors.). Make : Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge , Supplying Fitting And Fixing Ofexecutive Tables Are Of Size 120 (L) X 60 (W) X 75 (H) Cm With Hing Door Storage Width 35.0 Cm Outer To Outer . Work Surface,Modesty Panel,Under Structure & Hinge Door Storage Should Bemade Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirrming To Is-12823; 1990,Edge Banded With Matching 2 Mm Thick Pvc Lipping. Gromet Provided On Work Surface For Wire Management.Handle & Cam Lock Should Be Provided On Hinge Door Of Storage. Make: Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge , Supplying Fitting And Fixing Ofeducational Study / Training Units Are Of Size 124 (L) X 113 (W) X 75.72 (H) Cm ,Desk-Top Panel,Modesty Panel & Back Panel Should Be Made From 18Mmthk Pre-Laminatedtwin Board (E1/P2 Grade)With Pvc Edge Bandingon All Sides.The Panels Have Corners Roundedfor Safetyusage. All Side Metal Frames And Cross Connectors Are Made From Combination Of 25.4 X1.2 Mm Thk(Approx. 18 Swg) Round Erw Tubes ,31.8 X 1.2 Mm Thk(Approx. 18 Swg) Round Erw Tubes And 28.6 X 1.2 Mm Thk(Approx. 18 Swg) Round Erw Tubes(As Per Is:7138)Which Are Welded Together.The Welded Structures And Cross Connectorsafe Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. Back Supports Which Are Provided At The Rear Back Are Made Of 50.8 X 25.4 X 1.2 Mm Thk(Approx. 18 Swg)Rectangular Erw Tubes(As Per Is:7138).The Tubes Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. The Storage Shelves Are Made From 0.6 Mm Thk Ms Sheet(As Per Is:513) Fixed Below The Desk Top Panel And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. Hooks Are Provided On The Vertical Side Frameson Both Sides Ofthe Desk For Hanging Bags/Bottles. They Are Made From 2 Mm Thk Ms Sheet(As Per Is:513) And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. The Understructure Is Assembled Using M6 Trilobular Screws(As Per Din 7500) With Zn Blue Plating(As Per Is 1573:1986).Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge Compact Laminate Seat And Back Panels Are Assembled Using M6 Countersunktrilobular Screws(As Per Din 7500) With Zn Black Plating(As Per Is 1573:1986). Spacers Are Provided On The Top Of Round Tubes For Wooden Panels Fixing.They Are Made Of Pp Glass Filled(30%). Plastic Caps Made Ofpp Copolymer(3530 Grade) Are Also Provided On The Rear Frames Adding More Aestheic Value To The Product. M6 High Tensile Tvs Make Bolt(Class 8.8) With Glasss Filled Nylon Level Adjustors Are Provided At The Bottom Of Understructure To Take Cafe Of Unevenness In Floor With Height Adjustment Of Approx 15Mm. Make: Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge , Supplying Fitting And Fixing Ofeducational Study Units Are Of Size 59.4X 105.1 X 72.55 Cm , Desk Of 12Mmthick(±1Mm),Base Material-10.4Mm Bent Ply,0.8Mm Thik Dl On Top 0.8Mm Thik Backing Laminate On Bottom Surface Edgefinish-Malamine Matching With Dl Colour M6 Plastic Inserts Are Providedfor Mounting The Desk To The Understructure. Storage Under Desk Should Be Fabricate Dstructure In Ø5mm Rod With Powder Coat Finish.Storage Under Seat Should Fabricated Structure In Ø16mmx2mm Thik Tube With Ø5mm Rod With Powder Coat Finish.Under Structure Should Made From Ø25.4Mmx2mm Thik Tube With Powder Coatfinish.Capin Nylon-6S13pt Grade Are Mounted On The Open End At Bottom Side Of The Structure & At The Other End Endcap In Ldpe Are Mounted. Stud In Nylon-6 S13 Pt Grade Are Mounted On The Bottom Side Of The Structure.For Seat Mounting 50.8Mmx25.4Mmx2mm Thk Tube Fabricated With Ø16mmx2mm Thk Tube With Powder Coating. At The Open End Of Ø16 Tube Internal Ferrule In Ldpe Are Mounted.Seat Shell Should Plastic Moulded Seat Shell In Pp Are Mounted On The Understructure.Seat Shel Lhaving M6 Nut Insert On The Bottom Side For Mounting. , Executive Storage Unitwith 4 Door Main Module Of Size 1797 H X 698 W X 418 D Mm With Addon Unit Sizer688 Mm(H) X 340 Mm (W). All Side Panels Top/Bottom Panels, Doors And Shelf Panels Are Made From 18Mm Thick Pre–Laminated Boardof E1-P2 Grade And Approved Shade Confirming To Is12823:1990 With 2Mm Thick Pvc Edge Lipping. Back Panel Made From 9Mmthick Pre–Laminated Board . The Add On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel .Uniformly Distributed Load Capacity Per Each Shelf Is 25Kg. Camlock Should Have Oval Knob That Functions As A Handle With Click Action Mechanism.Key Removal In Locked And Unlocked Position Should Be Possible And It Have Zinc Alloy Die Cast Housingmake: Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge , Supplying Fitting And Fixing Of Executive Storage Unit With 8 Door Main Module Of Size 1797 H X 698 W X 418 D Mm With Addon Unit Size 443.5 Mm(H) X 340 Mm (W). All Side Panels Top/Bottom Panels, Doors And Shelf Panels Are Made From 18Mm Thick Pre–Laminated Boardof E1-P2 Grade And Approved Shade Confirming To Is12823:1990 With 2Mm Thick Pvc Edge Lipping. Back Panel Made From 9Mmthick Pre–Laminated Board . The Add On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel .Uniformly Distributed Load Capacity Per Each Shelf Is 25Kg. Camlock Should Have Oval Knob That Functions As A Handle With Click Action Mechanism.Key Removal In Locked And Unlocked Position Should Be Possible And It Have Zinc Alloy Die Cast Housing. Make: Godrej/Durian/Geeken/ Or Equivalent As Directed By E.I.Charge

INR 6000 /-

INR 32.52 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB