Tender For Instrumentation Works Tender For Ms Block Unit And Pfcc Unit For Epcm1 At Nrep; 1 Supply of following items Supply charges including charges for transportation, unloading at site, MTC, fasteners, accessories, material inspection at Vendor work shop including TPI charges , , MOCas per Modulating & ON/OFF Control and Isolation Valves-TP-1ZZZA-IC-SPE-0011 & TP-1ZZZA-IC-SPE-0012; For Hooter, Beacon & FireDetectors refer Specification-TP-1ZZZA-IC-SPE-0024_D1. 2 SOLENOID VALVES 3 AIR FILTER REGULATORS 4 BEACON & HOOTER 5 TERMINAL BLOCKS 6 DIN RAIL 7 Hand SWITCH STOP, RESET 8 Light Interface Unit with Patch Chord - 6 port 9 8-Port ethernet switch 10 RS-485 to MODBUS TCPIP converter- Industrial Grade of reputed make 11 Ethernet to FO converter - industrial grade of reputed make 12 Corrosion probe with Hand held indicator and retractable probe and mandatory spare. (Refer MR documentTK-1ZZZA-IC-SPE-0035 for details) 13 JUNCTION BOXES - SUPPLY 14 Supplycharges including handling, TPI charges, transportationto the installation location, required hardware’s/fasteners, plugging of spare entries, Tagging, box-up, suitable greasing forscrews/L key screws, tools & tackles, manpower,scaffoldingetc. (MOC of hardwares shall as per tkUIPL -India specificationand direction of Engineer-in-Charge.Refer Specification no- TP-1ZZZA-IC-BOD-0001_D3 15 WEATHERPROOF JUNCTION BOXES 16 30 Terminals 17 EX-ROOF/FLAME PROOF JUNCTION BOXES 18 20Terminals 19 12 Terminals 20 06 Terminals 21 40 Terminals 22 EX-PROOF/FLAME PROOF/WEATHER PROOF HAND SWITCHES/PUSH BOTTON - SUPPLY 23 PUSH BUTTON STATION / CONTROL / LOCAL PANELS 24 EMERGENCY STOP 25 VIBRATION RESET/ON-OFF VALVES RESET PB STATION 26 BEACON TEST AND RESET PB STATION 27 INSTRUMENT AIR MANIFOLDS- SUPPLY 28 Supply charges including handling, transportationto the installation location, hardware/fasteners, accessories installation, pneumatic testing, cleaning/flushing, require consumables, tools & tackles, manpower, etc. all complete as per specification all complete as per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation. and direction of Engineer-in-Charge. 29 10 WAY 30 TUBE AND TUBE FITTING- SUPPLY 31 Supply charges including handling, TPI charges, transportation to the workinglocation, fabrication, accessories installation (fittings, valves manifold, etc.), tools & tackles, manpower, scaffolding , Hydro/Pneumatic testing, dressing, clamping, tagging, etc. all completeas per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation 32 SS316 TUBE SIZE 33 12mm OD x 1.65mm WT, Seamless, SS316 34 10mm OD Copper Tube 35 FITTINGS- SS316 36 MALE CONNECTORS- SS316 (1/2 NPTM x 1/2 OD) 37 MALE CONNECTORS- SS316 (1/4 NPTM x 12mm OD) 38 FEMALE CONNECTOR- SS316 (1/2 NPTF x 1/2 OD) 39 UNION TEE (1/2 OD x 1/2 OD x 1/2 OD) 40 TUBE UNION (1/2 OD x 1/2 OD) 41 TUBE CAP (1/2 OD) 42 NEEDLE VALVE 43 GATE VALVE (1/2 NPTF x 1/2 NPTF) 44 END BLIND CAP (NPT MALE) 45 ADAPTOR/REDUCER 46 VARIOUS FITTINGS 47 CONDENSATE POT-SS316 (3 Pot with, 1/2NPT) 48 2 VALVE MANIFOLD SS316 (1/2NPTFx1/2NPTF) 49 MALE CONNECTOR, 1/2OD X 3/4NPTM, SS316 50 MALE CONNECTOR, 1/2OD X 1NPTM, SS316 51 Instrument Tube support 52 MALE CONNECTOR, 1/2OD X 1/4(G), SS316,TYPE, WITH DOUBLE FERRULES, 53 MALE CONNECTOR, 1/2OD X 1/8(G), SS316,TYPE, WITH DOUBLE FERRULES, 54 C series check valve 1/2OD,crack pressure,1/3PSIG seal,MOC-SS 316. 55 Female Connector 3/4 NPTF X 3/4 OD,SS316 56 CONNECTOR - 1/2 X 3/4 - BSP (M) X OD - 6000 # - SS316/SS316L 57 CONNECTOR - 3/4 X 3/4 - BSP (M) X OD - 3000 # - SS316/SS316L 58 Male connector double compression 1/2BSP(M) x 1/2 OD,SS316 59 FEMALE CONNECTOR- SS316 (1/4 NPTF x 12mm OD) 60 2 VALVE MANIFOLD SS316 (1/2NPTFx1/2NPTM) 61 TUBE UNION-SS316 (6mm OD) 62 END BLIND CAP ( 12mm OD) FOR TUBE 63 CONDENSATE POT-SS316 (3 Pot with, 3/4NPT) 64 CABLE GLANDING AND TERMINATION 65 Supply charges includingTPI charges, transportation to working location ,require hardware/fasteners, consumables, installation of hoods & adapters, tagging ,ferruling, lugging, supply of consumables( like lugs, sleeve for shield/drain, sealing compounds etc.) , making suitable holes for cable entries, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge. Glanding & termination is included in cable laying cost. Following is applicable if contractor to perform only glanding & termination and cables are layed by others. 66 SIGNAL,CONTROL,POWER CABLES 67 1/2 NPTDOUBLE COMPRESSIONSS304 with shrouds 68 1/4 NPTDOUBLE COMPRESSION SS304 with shrouds 69 1-1/2 NPTDOUBLE COMPRESSION SS304 with shrouds 70 1-1/4 NPTDOUBLE COMPRESSION SS304 with shrouds 71 1 NPT DOUBLE COMPRESSION SS304 with shrouds 72 1/2 NPTBLINF PLUG 73 1-1/2 NPTBLIND PLUG 74 1 1/4 NPT PLUG 75 CABLE GLANDS 1-1/2 ET, Weatherproof with Checknut (PANEL) 76 CABLE GLANDS 1 ET, Weatherproof with Checknut (PANEL) 77 CABLE GLANDS 1-1/4 ET, Weatherproof with Checknut (PANEL) 78 1/2 NPT X 3/4NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 79 3/4 NPTDOUBLE COMPRESSION 80 1 1/2NPT X 1NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 81 1 1/2NPT X 2NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 82 M20DOUBLE COMPRESSIONSS304 with shrouds 83 M40DOUBLE COMPRESSION SS304 with shrouds 84 FIBER OPTICAL; ARMOURED /UNARMOURED 85 Scope includes preparation of all fibres and splicing / patching ,Supply of adequate consumables for the execution of the work (such as fibre optic connectors suitable for the application), testing, tools & tackles, manpower, scaffolding etc. all complete as per specification REFER ASTP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge. 86 FIBER-OPTIC CABLES- Single Mode , 6 Fibre 87 FIBER-OPTIC CABLES- Single Mode , 24 Fibre 88 CABLE TRAYS/DUCTSSUPPLY 89 Supply charges including transportation to working location, TPIcharges ,Fabrication, Clamping, accessories installation (including bends, elbows, reducers etc.), Tray identification, painting wherever require, consumables, tools & tackles, manpower, scaffolding etc. all completeas per tkUIPL-INDIA specificationand direction of Engineer-in-Charge. TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation 90 PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM (Upto 300mm Bends shall be site fabricated) 91 WIDTH 300 MM 92 WIDTH 150 MM 93 WIDTH 100 MM 94 WIDTH 50 MM 95 CABLE DUCTSWITH COVERS- SUPPLY 96 Supply charges includingTPI charges, transportationto working location, insuringproper duct supports/runners provided by other, duct supports if required, welding wherever require, tools & tackles, manpower, scaffolding, Clamping, duct covers installation, accessories installation (including bends, elbows, reducers etc.), painting wherever require, consumables,etc. all completeas per tkUIPL specification and direction of Engineer-in-Charge.TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation & TP-1ZZZA-IC-STD-0001_D1 Installation Standards Instrumentation_1 97 1200 x 400 mm (1A) 98 1000 x 400 mm (1A) 99 CONDUITS : 100 RIGID HDPE CONDUITS : HDPE conduit shall be as per IS-4984 or as per equivalent IEC code. The outer sheath colour of HDPE conduits shall be orange with black for the fittings throughout the fibre optic cable run.Installation charges including transportation from tkUIPL/Client material store to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffoldingetc. all complete as per tkUIPL-INDIA specification-REFER ASTP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge. 101 25 mm nominal dia 102 50 mm nominal dia 103 FLEXIBLE CONDUITS (SS304): Supply and Installation charges includingTPI charges, transportation to working location, fabrication like (making threads, bends, etc.), require hardware’s/fasteners (U clamps etc.), clamping/supporting, accessories installation(fittings), consumables, tools & tackles, manpower, scaffoldingetc. all complete as per tkUIPL-INDIA specification REFER ASTP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation and direction of Engineer-in-Charge. 104 25 mm nominal diaconduit 105 50 mm nominal diaconduit 106 CANOPY /SUNSHADEFRP - SUPPLY 107 Supplycharges including TPI charges ,transportationto working location, supporting wherever requireforinstruments, JBs , etc. (like integratedinline instruments, close couple mounted instruments, etc.), hardwares/fasteners, consumables etc. Fabrication, installation, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL-INDIA specification and direction of Engineer-in-Charge.TP-1ZZZA-IC-BOD-0001_D3 Engineering Design Basis for Instrumentation 108 PREFABRICATED. CANOPIES 109 SINGLE TRANSMITTER/INSTRUMENT 110 TWOTRANSMITTERS/INSTRUMENTS 111 SINGLE JUNCTION BOXES 112 THREE JUNCTION BOXES 113 FOUR JUNCTION BOXES 114 HAND SWITCH/PUSH BUTTON 115 MULTIPLE TRANSMITTERS/INSTRUMENTS 116 TWO JUNCTION BOXES 117 SIX JUNCTION BOXES 118 EIGHT JUNCTION BOXES 119 FIVE JUNCTION BOXES 120 STANCHIONS FOR INSTRUMENTS - SUPPLY 121 Supply charges including TPI charges, transportation to workinglocation,brication, surface cleaning, painting, suitable clamps with pipe line (for close couple hook-ups etc.), hardwares/fasteners, grouting, clamps, consumables, tools & tackles, manpower, scaffolding etc. all complete as per tkUIPL-INDIA specification-REFER AS PER DOCUMENT INSTRUMENT INSTALLATION SKETCHES and direction of Engineer-in-Charge.REFER AS PER DOCUMENT TP-1ZZZA-IC-STD-0001INSTRUMENT INSTALLATION SKETCHES 122 FLOOR MOUNTING 123 STEEL COLUMN MOUNTING 124 RCC WALL, COLUMN 125 PLATFORM MOUNTING 126 OUTSIDE HAINDRAIL 127 MULTIPLE TX ON PLATFORM MOUNTING 128 STRUCTURAL STEEL 129 Supply charges including TPI charges,transportation , fabrication, installation, surface cleaning, painting , consumables, tools & tackles, manpower, etc. all complete as pertkUIPL-INDIA specification.and direction of Engineer-in-Charge. 130 STRUCTURAL STEEL 131 NUT & BOLTS WITH WASHERS, M10x35mm, SS 132 ANCHOR FASTNER, M10x80mm, MS (CADMIUM) 133 BEAM CLAMP WITH SS BOLT & NUT , HEIGHT 40mm, MS/SS 134 PIPE CLASSB,IS=1239 PART-1 , 2, MS(PAINTED) 135 COVER PLATE FOR2PIPE , 6THK., MS(PAINTED) 136 TYPE J HOOK BOLT & NUT , M10x100mm, MS 137 NUT & BOLTS WITH WASHERS, M12x50mm, SS 138 ANCHOR FASTNER, M10x100mm, MS HD.GALVANISED 139 ANCHOR FASTNER, M12x100mm, MS (CADMIUM) 140 STRUT CHANNEL (1-5/8) 141 FIRE PROOFING FOR CABLE DUCT,TRAY,ANGLE TRAY,ETC.- SUPPLY 142 Supply charges including TPI charges,transportationto workinglocation,installation of Mattresses, Cladding, SS Clamps, all fittings, accessories, tools & tackles, manpower, scaffolding etc. all complete as pertkUIPL-INDIA specificationand direction of Engineer-in-Charge.REFER ASTP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation 143 PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM 144 WIDTH 300 MM 145 CABLE DUCTSWITH COVERS- SUPPLY 146 Supply charges includingTPI charges, transportationto working location, insuringproper duct supports/runners provided by other, duct supports if required, welding wherever require, tools & tackles, manpower, scaffolding, Clamping, duct covers installation, accessories installation (including bends, elbows, reducers etc.), painting wherever require, consumables,etc. all completeas per tkUIPL-INDIA specification and direction of Engineer-in-Charge. 147 1200 x 400 mm (1A) 148 1000 x 400 mm (1A) 149 General 150 Supply of Motorized Cable Feeder as per Annexure-Tech-1 151 Supply of Cable rollers & Hook Type Sheaves (Set of various types) as per Annexure-Tech-1 152 Supply of Floor mounted electric winch machine for Cable pulling as per Annexure-Tech-1 153 Supply of Cable Drum Lifting Jack assembly as per Annexure-Tech-1 154 Supply of Portable Electric cable pulling machine as per Annexure-Tech-1 155 Supply of Rope of the winch system (50 Mtrs.) as per Annexure-Tech-1 156 Supply of Rope of the winch system (100 Mtrs.) as per Annexure-Tech-1 157 Supply of Rope of the winch system (200 Mtrs.) as per Annexure-Tech-1 158 Supply of Rope of the winch system (300 Mtrs.) as per Annexure-Tech-1 159 Supply of Rope of the winch system (500 Mtrs.) as per Annexure-Tech-1
