Tender For Internal Electrification Of Community Center Sector Chi 4 Greater Noida. - Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in pvcconduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcementbefore concreting, complete with 1.5sq mm copper conductor cable as earth wire drawn inside . continuity wire,GP Box, modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. UPPWD-2018/138C+187A 3 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm pvccopperconductor cable as earthwire drawn inside the conduit .etc,GP Box , modular type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. UPPWD-2018/140 C+187A 4 Wiring point for two ways light with 1.5 sq. mm. F.R PVC insulated multistrand single core copper conductor cable in heavy guage Pvc conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq mm FRLSH Pvc insulated multi strand copper conductor Cable as earth wire drawn inside the Conduit GI earth continuity wire GP Box , and two number two way piano type switches & ceiling rose /angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including matching colour wash. UPPWD-2018/139C+187B 5 Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm copper conductor asearth wire etc continuity wire and modular type switch and socket etc., complete in all respect including matching colour wash.UPPWD-2018/141C+187C 6 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type modular socket in suitable M.S. box of 175mm x 100mm x 50mm size with modular switch & Socket in place of Pianotype Switch & Socket. UPPWD-2018/1139+187C 7 Supply and wiring of submain with two number 2.5 sq.mm. PVC insulated 1100 V grade multi Strand Copper conductor cable in 20 mm dia. heavy duty (2mm thick PVC conduit partly laid in slab along with reinforcement before concreting and partly concealed in wall, with one no.1.5 Sq mm GI FRLSH Pvc insulated 1100 V grade multi Strand Single Core Copper Conductor Copper earth continuity wire etc. complete in all respects including matching colour wash. (UPPWD-2018/1307C) 8 Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit including matching colour wash etc., complete in all respect.UPPWD-2018/216 C 9 Supply and wiring of submain with two number 10 sq.mm. PVC insulated 1100 V grade single core Copper conductor cable in 25mm dia heavy duty (2mm thick)steel conduit on surface, with one number 10 Sqmm FRLSH Pvc insulated multi Strand Copper Conductor Cable as earth continuity wire etc.complete in all respect.UPPWD-2018/213 C 10 Supply and wiring of submain with two number 16 sq.mm. PVC insulated 1100 V grade multi Strand single core copper conductor cable in 32mm dia heavy duty (2 mm thick) Pvc steel conduit on surface, with one number 10 Sq mm FRLSH Pvc insulated multi strand copper coonductor cable as earth continuity wire etc. complete in all respect.UPPWD-2018/214 C 11 Supply and fixing hexagonal/RoundG.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm& brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. (UPPWD-2018/1149) 12 S & F surface/Flush mounting 8ways V TPN distribution board without additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.UPPWD-2018/1028 A 13 S&F of 63 Amp. 4 Pole Isolator CAT- BUPPWD-2018/1007 B 14 S&F single pole MCB blanking plate. CAT B UPPWD-2018/1034 B 15 S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve CAT-B UPPWD-2018/1002 16 Supply of 1200mm sweep ceiling fan complete with double ball bearings, bladers, down rod, shackle insulator, canopy etc. complete as required.UPPWD-2018/1501 17 Supply, Installation, testing and commissioning of 300mm dia heavy duty 900 RPM exhaust fan complete with louvered shutters. Complete in all respect. GNIDA SOR-2024 (S.No.-52) 18 Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the atisfaction of Engineer in charge of work.UPPWD-2018/1203c 19 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AA UPPWD-2018/1413 20 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. CAT-AA UPPWD-2018/1422 21 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD-2018/501 22 4CX16sqmm 23 3.5CX120 sqmm 24 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. UPPWD-2018/503 25 4Cx16 Sqmm 26 3.5x120 Sqmm 27 Supply and fixing of plain or pin type copper tin plated cable socket( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.UPPWD- 2018/504 28 16 Sqmm 29 120 Sqmm 30 Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. (UPPWD-2018/289) 31 Supply and fixing of following dia G.I pipe (B class) in pole used as LED Street light bracket for fixing of LED Street light and for Cable entry including bending the pipe to the required shop Complete as required) (Each piece make 1.5mtr long) DSR-18/11.6.2) (used as Street lightbracket) 32 40 mm dia 33 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.UPPWD-2018/701(for TPN DB & High Mast) 34 Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-4. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. UPPWD-2018/807 e (2) 35 25Amp.TPN 36 S/L of 90mm dia DWC pipe for drawing of power cable across the road by drilling of 120mm dia at 1mtr. Below the road levelthe work should be done by manual Trenchless method. Complete in all respect. GNIDA SOR-2024 (S.No-15) 37 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.UPPWD-2018/802(C) 38 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. 39 Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with ccessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable oundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (UPPWD-2018/651) 40 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. CAT-AA(UPPWD-2018/1453) 41 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (UPPWD-2018/1131 42 Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work. UPPWD-2018/1134 43 Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.UPPWD-2018/1136 44 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. UPPWD-2018/1109 45 Labour Cess and GST will be paid extra as per govt. orders
