Tender For Repairs To Branded Furntitures And Repairs To Trade Pattern Class Room Furniture At Afs Tambaram; 1 AUDITORIUM CHAIR 2 M & L for dismantling of old unserviceable upholsered portion of (seat & back)Auditorium chair by removing old tornout tapestry cloth, cushion, cloth malmalandreplace the Cushion with moulded PU foam density 40 of size 480mm x475mm approx with PVC seat , bottom cover back rest made of curved high density cushion of size 450mm x 575mm covered wth poly wide fire protected fabric of approved colour with PVC cover PV and provided Laminated fabric with 3 mm foam and all as specified model and as directed. 3 M & L for removing the old unserviceable / colour paded upholstry cloth and lining cloth from seat and back of size 480mm x475mm X 100 mm for Auditorium Chair and S & F new upholstry cloth and lining cloth of approved quality & colourand stiched over the cushion complete all as directed all as shown on Model of chair ,The seat and back frame shall be neatly covered with PPCP TRAY with sound absorbing acoustical properties.Note :-Cost of the upholstry cloth used shall be of not less than 300/-- per meter and as directed. (Make : Bombay Dying/ Raymonds/ Arvind Mills) 4 M & L for repairs of Auditorium chair arms by removing old unserviceable arms and replacing with new arms. 5 M & L for repairs of Auditorium chair Back frame by removing old unserviceable frame and replacing back frame with MS sectionas per required size 25mmx18mm with 3 mm wall thick duly welded / screwed as per Manufacturers instructions complete all as specified and as directed. 6 M & L for repairs of Auditorium chair Seat frame by removing old unserviceable frame and replacing Seat frame with MS as per required size 20mm x 18mm with3 mm wall thick complete all as specified and as directed. 7 Removing unserviceable seat auto tip and replacing new seat auto tip of same make and model of old one all as specified and as directed. 8 M&L for preparation of exisitng steel surfaces and applying two coats of powder coated synthetic enamelasian painting to all steel exposed surfaces with spray gun machine and to hidden steel surfaces all as specified and as directed. 9 Refixing the existing auditorium chair at site by providing and tightening nut & bolts of suitable size and numbers as per existing and by providing suitable MS bottom plate with necessary fixing holes with anchor bolts and nuts including MS side panels by making the auditorium chair functional all as specified and as directed. 10 Sofa Sets 3 seater & 5/6 seater premium leatherette TP (Make : Godrej/Featherlite/Durian/TP) 11 Material and labour for removing of old unserviceable long rail fromseat of sofa set 3 seater and replacing single long rail with first class hard wood (Teak wood) of size 35 x 100 x 1680 as specified all as shown on drg and as directed. 12 Material and labour for removing of old unserviceable long rail fromseat of sofa set single seater and replacing single long rail with first class hard wood (Teak wood) as specified all as shown on drg and as directed. 13 Material and labour for removing of old unserviceable frame of seat back of sofaset 3 seater and replacing with first class hard wood (Teak wood) of required size and shape as specified all as shown on drg and as directed. 14 Material and labour for removing of old unserviceable frame of seat back of sofaset single seater and replacing with first class hard wood (Teak wood) of required size and shape as specified all as shown on drg and as directed. 15 Material and labour for removing of old unserviceable stiffener in seat / backof sofasetand replacing the same with first class hard wood (Teak Wood) of size 20 x 50 x600 as specified all as shown on drg and as directed. 16 Material and labour for removing of old unserviceable rear leg from sofa set 3 seater / single seaterand replacing with first class hard wood (Teak wood) of size 35 x 70 x 500mm as specified all as shown on drg and as directed. 17 Material and labour for removing of old unserviceable front leg from sofa set 3 seater / single seaterand replacing with first class hard wood (Teak wood) of size 35 x 70 x 500mm as specified all as shown on drg and as directed. 18 Material and labour for removing of old unserviceable side railfrom sofa set 3 seater / single seaterand replacing with first class hard wood (teak wood) of size 30 x 100 x 580mm as specified all as shown on drg and as directed. 19 Material and labour for removing of old unserviceable handle of sofaset 3 seater / single seaterand replacing the same with first class hard wood (Teak wood)of size 20 x 50 x600 as specified all as shown on drg and as directed. 20 Material and labour for removing of old unserviceable foam andleather from seat and back of sofa set and supply and fix new 100 mm thick foam 40 denisity of size and fix new recron cotton and elastic shape as per required basis and high quality tapestry cloth/leatherof approved quality and colourwith rate not less than Rs 750/- per mtr as specified all as shown on drg and as directed. 21 Material and labour for removing of old unserviceable foam tapestry clothfrom seat and back of sofa set and supply and fix new tapestry clothduly stitched of approved shade / colour as specified all as shown on drg and as directed. 22 SOFA SINGLE SEATER, FIVE SEATER AND FOUR SEATER FD-281 23 M & L for removing the old unserviceable / colour faded upholstry cloth and lining cloth from cushion of size 580 X 530 X 100 mm for sofa set FD-281 and S & F new upholstry cloth and lining cloth of approved quality & colourand stiched over single cushion complete all as directed.Note :-Cost of the upholstry cloth used shall be of not less than 300/-- per meter.(Make : Bombay Dying/ Raymonds/ Arvind Mills) 24 M & L for removing old unserviceable/ wornout cushion and tapestry cloth from sofa set 5 seater (Set consisting of 10 pieces of cushion) and supply of new cushion (set of 10) of size 580x 530x 100 mm thick make : sleep Well/Kur-lon with 40 density as approved by GEand cushioncovered with tapestry clothof approved shade & quality over a cover of lining cloth duly coveredand stiched over the cushions complete in all as specified and as directed. (Note : Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 300/- per meter.(Make : Bombay Dying/ Raymonds/ Arvind Mills) 25 All as per item No. 3.02 above but for sofa set 4 seater consisting of 8 pieces of cushion (FD-281) 26 Removing the old unserviceablewooden long rail of sofa set five seaterand S & F new long rail of same size made out of 1st class hard wood ( teak wood) all as specified and as directed. ( FD -281) 27 Removing the old unserviceablewooden short rail of sofa setfive seater and Single seater and S &F new short rail of same size made out of 1st class hard wood ( teak wood)all as specified and as directed.(FD-281) 28 Taking out unserviceable legs of sofa setthree seater and single seater and S & F new leg made out of 1st class hard wood ( teak wood)all as specified and as directed. (FD-281) 29 Removing the old unserviceable wooden front/side rail of sofa set single seaterand S &F new front/side rail of same size made out of 1st class hard wood ( teak wood) and all as specified and as directed. (FD-281) 30 Removing the old unserviceable side rail of sofa setthree seaterand S & F new side rail made out of 1st class hard wood ( teak wood)all as specified and as directed. (FD-281) 31 Removing the old unserviceable Arms of sofa setthree seater and single seater and S & F new arm made out of 1st class hard wood ( teak wood) all as specified and as directed. (FD-281) 32 Removing the old unserviceablewooden frontsupporting long rail of sofa set single seaterandS & F new long railof same size made out of 1st class hard wood ( teak wood)all as specified and as directed. (FD-281) 33 Removing the old unserviceablewooden bottom / rear supporting rail of sofa set single seaterand S & F new bottom/rear supporting rail of same size made out of 1st class hard wood (teak wood) all as specified and as directed. (FD-281) 34 Removing the old unserviceablewooden bottom / rear supporting rail of sofa set three seaterand S &F newof same size made out of 1st class hard wood (teak wood) all as Specified and as directed. (FD-281) 35 Material and labour for removing of old unserviceable stiffener in seat / backof sofa set Singleseater, Four Two seater ,Three seater and replacing the same with first class hard wood (Teak Wood) of size 20 x 50 x 600 as specified all as shown on drg and as directed. 36 Preparation of wooden surfaces of the Sofa set Five seater by scrubbing/ dusting / sanding and applying melamine polish (Make: Asian/Berger/Shalimar) of approved colourand shade by using spary gun machine as per trade paractice with shining and finishing without any scratches and standard Engineering workmanship all as directed 37 Preparation of wooden surfaces of the Sofa set Four seater by scrubbing/ dusting / sanding and applying melamine polish (Make: Asian/Berger/Shalimar) of approved colour and shade by using spary gun machine as per trade paractice and with shining and finishing without any scratches standard Engineering workmanship all as directed 38 Preparation of wooden surfaces of the Sofa set single seater by scrubbing/ dusting / sanding and applying melamine polish (Make: Asian/Berger/Shalimar) of approved colour and shade by using spary gun machine as per trade paractice with shining and finishing without any scratches and standard Engineering workmanship all as directed 39 CHAIR EXECUTIVE HIGH BACK, Make : Godrej/Featherlite/Durian 40 Removing old / torned unserviceable tapestry cloth from seat of the chair revolving high back, supply and fix new cloth along with cushion 32 density lining on seat of approximate size 480 mm x440 mm or required size and shape all as directed. NOTE:Cost of tapestry cloth shall not be less than Rs 300/metre and make shall beRaymonds/Bombay Dying/Arvind Mills and make of cushion shall be Kurlon/Sleepwell/U-Foam. 41 All as per ser itemNo 4.01 above but back of chair revolving high back of size 680 mm x 500 mm. 42 Removing the old unsv hydralic pressure system of chair revolving high back and replace new system as per existing origin as approved by GE and all as directed. 43 Removing the old unsv singlelock mechanism of chair revolving high back and replace new system as per existing origin as approved by GE and all as directed. 44 Removing of old broken castor wheels of chair revolving high back and supply and fix new castor wheel PVC (set of 5) Godrej as per existing origin as approved by GE and all as directed. 45 Removing of old unserviceable handle from chair revolving high backand supply and fix new handles as approved by GE and all as directed.Note for Item No 1 to 4 : Furniture items shall be removed carefully from store yard for repairs without damaging other items and after carrying out repairs shall be shifted in side store yard and neately stacked all as directed by furniturte incharge on a daily basis and the quoted rate shall be deemed to include for this provision. 46 TABLE COMPUTER: TP 47 Removing old unserviceable top from table computer supply and fix new top for table computer of size exceeding6 Sqft and not exceeding 8 Sqft.Note: Table (TP) top shall be made out of compresed laminated from company.Make : Godrej/Zurai/Damro/Equivalent 48 Removing old legs of table computer supply and fix new compresed laminated legsof size 760 mm x 600 mm as per existing trade pattern complete and all as directed.Make: Godrej/Damro/Equivalent 49 Removing old broken caster wheels of table computers supply and fix new PVCwheels set of 4 (four) best quality all as per TP complete and all as directed. 50 Removing old drawer of table computer supply and fix new drawer all as per TP including sliding channel and locking system complete and all as directed. 51 Removing old key board plank and sliding channel , supply and fix new key board plank and channel made out of compresed laminated from company of size 1x2 1/2,and sliding channel as per TP complete and all as directed.Make : Godrej /Damro/Equivalent 52 Removing back side and bottom of table computer of TP/Godrej supply and fix new back side plank and bottom of table computer compressed laminated ofsize 1 x 4complete and all as directed.Make: Godrej/Damro/Equivalent 53 CHAIR COMPUTER REVOLVING Make: Godrej/Featherlite/Damro/Durian 54 Removing the existingold unserviceableseat & back cushion including faded cloth completefrom therevolving chairsand replacing the same with new tapestry cloth, along withPVC beading alround and cushion foammake of (Sleep well/Kur-lon/Equivalent) 32 mm density of size as per Godrej brandand as approved complete all as directed. 55 Removing the existingold unserviceable worn out/torn out seat & back cushion complete with faded/wornout cloth from therevolving chairsMid back and replacing the same with new tapestry cloth,PVC beading alround and cushion foam (Sleep well/Kur-lon/Equivalent)32 mm density of size as per Godrej brand and as approved by Engr-In-Charge. 56 Removing the existingold unserviceable worn out/torn out seat & back cushion complete with faded/wornoutcloth & Ply wood from the Chair Office and replacing the same with new tapestry cloth as per size and shape, cushion foam (Sleep well/Kur-lon/Equivalent) 32 mm density, and size as per specifications and as approved(TP) 57 Removing the old unserviceable singlelock mechanism of chair revolving high back and replace new system as per existing origin as approved by GE and all as directed 58 Removing of old unserviceable handle from chair revolving mid back/low backand supply and fix new handles as approved by GE and all as directed. 59 Removing the existingold unserviceable worn out/torn out parts from therevolving chairs, S&F the new standard parts including necessary welding work wherever required including making good for Arm rest left and right through welding complete all as specified and as directed. 60 Removing the existingold unserviceableConnector of seat & backto Chair computer revolving LB/MB and replace new system as per existing OEM/Manufacturer as approved by GE and all as directed 61 Removing the existingold unserviceable Castor roller wheel to Chair computer revolving Mid Back/Low back and replace new system as per existing origin as approved by GE and all as directed. 62 Removing the existingold unserviceable Hydraulic compressor forChair computer revolving Mid Back/Low backand replace new system as per existing origin as approved by GE and all as directed 63 M & L replacing existingloose screws of arm rest, seat & back, base plate and greasingof compresor parts up/down lever, tightening of PVC beading and welding wherever required all asdirected forChair computer revolving Mid Back/Low back. 64 CHAIR WITH DESKELITE TP PCH 7004 GODREJ 65 Removing the old seat andback and supply and fix new seat and back as per model PCH 7004 including fixing of new seat and back cover complete and all as directed. 66 Removing theunserviceable handle special writing pad and supply and fix new special writing pad as per TP PCH 7004 complete and all as directed. 67 CLASSROOM FURNITURE / DESK SCHOOL CHILDTYPEA :FD-124 68 Removing the old unserviceable top of desk school type A supply and fix new top made from 18 mm thick plywood BWR grade and fixed with 1mm thick laminated sheet teak wood shade on the top of size 920 mm x 465 mm, cutto shape including 2mm thick PVC edging all round and fixed with strong bonded chemical by using hot pressed machineall as specified and shown on drawing. 69 Removing the old unserviceable bottom body ofdesk school type A, supply and fix new bottom body made from second class hard wood (Teak) of size 800 mm x 370 mm x 12 mm thick andapplying melamine polish of dark coffee shade (Make:Asian/Berger/Nerolac) of approved colour and shade by using spray gun machine as per trade practice and standard Engineering workmanshipall as directedand shown on drawing. 70 Removing the old unserviceable side rail of desk school type A ,supply and fix new side rail made fromsecondclass hard wood (Teak) of size 375 mm X 140 mm X 18 mm thick andapplying melamine polish of dark coffee shade (Make:Asian/Berger/Nerolac/Equivalent) of approved colour and shade by using spray gun machine as per trade practice and standard Engineering workmanshipall as directedand shown on drawing. 71 Removing the old unserviceable back rail of desk school type A, supply and fix new back rail made from firstclass hard wood (Teak) of size 800 mm x 140 mm x 18 mm thick andapplying melamine polish of dark coffee shade (Make:Asian/Berger/Nerolac/Equivalent) of approved colour and shade by using spray gun machine as per trade practice and standard Engineering workmanshipall as directedand shown on drawing. 72 Removing the unserviceable shelf of desk school type A, supply and fix new shelf made from firstclass hard wood (Teak) of size 370 mm X 120 mm X 18 mm thick andapplying melamine polish of dark coffee shade (Make:Asian/Berger/Nerolac) of approved colour and shade by using spray gun machine as per trade practice and standard Engineering workmanshipall as directedand shown on drawing. 73 Preparing the steel surfaces of desk school type A andapplying one coat of synthetic enamel black paint of approved tint and qualityall as specified andas directed. 74 Prepare the wooden surfaces of desk school type A by scrubbing , dusting/sanding andapplying melamine polish of dark coffee shade (Make:Asian/Berger/Nerolac/Equivalent) of approved colour and shade by using spray gun machine as per trade practice and standard Engineering workmanshipall as directedand shown on drawing.. 75 CHAIR CUSHIONED WITH WRITING PAD: TP 76 Removing old / torned unserviceable tapestry cloth from seat of the chair cushioned with writing pad, supply and fix new cloth along with cushion 32 density lining on seat ofrequired size and shape all as directed. NOTE:Cost of tapestry cloth shall not be less than Rs 300/metre and make shall beRaymonds/Bombay Dying/Arvind Mills/Equivalent) and make of cushion shall be Kurlon/Sleepwell/U-Foam/Equivalent 77 All as per ser itemNo 9.01 above but back of chair cushioned with writing pad of size 680 mm x 500 mm required size and shape all as directed. NOTE: Cost of tapestry cloth shall not be less than Rs 300/metre and make shall beRaymonds/Bombay Dying/Arvind Mills/Equivalent) and make of cushion shall be Kurlon/Sleepwell/U-Foam/Equivalent 78 Removing of unserviceable hand rest and stainles steel rod ofchair cushioned with writing pad, supply and fix newhand rest and stainles steel rod of required shape and size as per drg with one coats of synthetic enamel paint Black colour of first quality approved tint make by spray painting all as directed and as per drg. 79 Repairing the detoriated/damaged portion of chair cushionedwith writing pad by cutting and providing and welding new steel frame of 25mm 18 gauge rounded pipe of required length and shape, and applying two coats of synthetic enamel paint over a coat of primer etc, complete all as per drg and as directed. 80 CHAIR VISITOR WITH ARMS:TP 81 Removing old / torned unserviceable tapestry cloth from seat of the chair Visitor with armssupply and fix new cloth along with cushion 32 density lining on seat ofrequired size and shape all as directed. NOTE:Cost of tapestry cloth shall not be less than Rs 300/metre and make shall beRaymonds/Bombay Dying/Arvind Mills/Equivalent) and make of cushion shall be Kurlon/Sleepwell/U-Foam/Equivalent 82 All as per ser itemNo 10.01 above but back of chair Visitor with armsrequired size and shape all as directed.NOTE: Cost of tapestry cloth shall not be less than Rs 300/metre and make shall beRaymonds/Bombay Dying/Arvind Mills/Equivalent) and make of cushion shall be Kurlon/Sleepwell/U-Foam/Equivalent 83 Removing of unserviceable hand rest ofchair Visitor with arms, supply and fix newhand rest rquired shape and size as per drg with one coats of synthetic enamel paint Black colour of first quality approved tint make by spray painting all as directed and as per drg. 84 Repairing the detoriated/damaged portion of chair Visitor with arms by cutting and providing and welding new steel frame of rounded pipe of required length and shape, and applying two coats of synthetic enamel paint over a coat of primer etc, complete all as per drg and as directed. 85 CHAIR CBA SPL WITH HAND REST 86 Removing of unserviceable seat of chair CBA special with hand rest steel, supply and fix new seat a frame made out of 2nd class hard wood (teak) beading 50 mm x 20 mm of size 450 mm/400 mm x 450 mm finished with two coats of French polish and canned with white plastic caneof 0.4mm thick 2mm wide half round and border with 0.4mm thick 3mm wide white plastic cane superior quality (Godrej pattern) etc ,complete all as per drawing and as directed . 87 Removing of unserviceable back of chair CBA special with hand rest steel , supply and fix new back a frame made out of secondclass hard wood (teak)beading 50 mm x 20mm of size 450 mm/380 mm x 300 mm finished with two coats of French polish (Make :Sheenlac/Asian/Equivalent) and canned with white plastic caneof0.4 mm thick 2 mm wide half round and border with 0.4 mm thick 3mm wide white plastic cane superior quality (Godrej pattern) etc complete all as per drg and as directed. 88 Removing of unserviceable hand rest ofchair CBA special with hand rest steel, supply and fix new hand rest made out of 18 mm thick teak wood of size 485 mm x 255 mm x18 mm of required shape and size as per drawing with two coats of French polish (Make :Sheenlac/Asian/Equivalent) and fixed with wood screw all as directed. 89 Derusting/scrubbing of steel surface of chair CBA special steel with hand rest prepare the surface providing putty white of approved quality and applying two coats of synthetic enamel paint over a coat of primer by using spray gun machine , providing new PVC shoe best quality suitable to the legs etc, complete all as per drawing and as directed. 90 Repairing the detoriated/damaged portion of Chair CBA special with hand rest by cutting and providing and welding new steel frame of 25mm square pipe 1.6mm thick of required length and shape, and applying two coats of synthetic enamel paint over a coat of primerby using spray gun machinecomplete all as per drawing and as directed. 91 Taking out the existing unserviceable canning from chair CBA special seat and back, cleaning the holes of chairs and rebated portion and recanning with new white plastic cane 0.4 mm thick 2 mm wide, half round and border with 0.4 mm thick 3 mm wide plastic cane of approved superior qualityetc., all as specified and as directed. 92 LOOKING MIRROR 5X2 TP 93 Replacement of unserviceable mirror with frame for looking mirror, Supply and fix mirror of size 5x2 x 5.5 mm thick including the frame using 6 mm plywood on back and teak wood beading alround according to the size and shape shown on drawing and as directed. 94 Polishing for looking mirror 5x2 with one coat of french polishing with shining and finishing without any scratches to old/ new surfaces including preparation of surfaces complete all as specified and as directed. 95 Note for Item No 01 to 12 : Furniture items shall be removed carefully from store yard for repairs without damaging other items and after carrying out repairs shall be shifted in side store yard and neately stacked all as directed by furniturte incharge on a daily basis and the quoted rate shall be deemed to include for this provision.
