Tender Notice For Proposed Interior Works Of Officers Mess At A.O. Jammu (Ut-J&K), Jammu-Jammu And Kashmir

Tender Notice For Proposed Interior Works Of Officers Mess At A.O. Jammu (Ut-J&K); 1.00 FLOORING / WALL CLADDING 1.10 PLANK TILES Providing & fixing PLANKS Tiles 280 x 1800 or 200 x 1200 of approved make ( Emser / Restile/ Kajaria/Orient/Jhonson ) in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3,/ Tile chemical of approved make i.e. (Roff/Pidilite/Mapei) with 3-4mm spacers and grooves filled with epoxy of approved makes and color ( make: Pidilite/Sika/Varmora) to match the shade to tiles. Works include dismentaling of old floor and removal of malba to nearest MC dumpyard. SQM 83.00 1.20 Moraccon tiles 300mm x 300mm Providing and laying 1st quality Moraccon tiles 300mm x 300mm (as specified in Dado (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: on 20 mm thick cement mortar 1:4(1 cement: 4 coarse) sand), including grouting the joints with white cement and matching pigments etc., complete.Approved makes( Nitco, Johnson, RAK, Kajaria ( Note: Work Incl.Dismentaling of existing tiles and disposal of material to contractors own dump.) SQM 15.00 (In DADO behind Buffet Counter) 1.30 Vitrified tiles 600mm x 600mm Tiles Providing and laying 1st quality Vitrified / Moraccon tiles 600mm x600mm or 300mm x 300mm (as specified in Dado (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: on 20 mm thick cement mortar 1:4(1 cement: 4 coarse) sand), including grouting the joints with white cement and matching pigments etc., complete.Approved makes( Nitco, Johnson, RAK, Kajaria ( Note: Work Incl.Dismentaling of existing tiles and disposal of material to contractors own dump.) SQM 55.00 ( Incl. Canteen & Kitchen area & In DADO) 2.00 P.O.P. / FALSE CEILING WORK 2.10 Gypsum False Ceiling Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed form M.S. sheet and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS ; 277 and cosisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm center to center, one flange fixed to the ceiling with dash fastner 12.5mmx50mm long with 6mm dia bolts other flange of cleat fixed to the angle hungers 0f 25x10..50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermidiate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre which the ceiling section 0.5 mm thick bottom wedge 80mm with tapered flanges of 26mm each having lips of 10.5 mm, at 450 mm centre to centre shall be fixed in the direction prependicular to G.I. intermidiate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channles 0.5 mm thick 27mm high having flanges of 20 mm and 30 mm long, the perimter of ceiling fixed to wall/partion with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screw @ 230 mm interval, including fixing of gypsum board to ceiling.Section and perimter channel with help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edes of the board with recmmended jointing compound, jointing tapes, finishing all as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channel suitably fixed ,all complete as perdrowings, specification and direction of the ingineer in Charge but excuding the cost of painting with : Note: work to include, removing and staking of Exiting Gupboard ceiling including G.I. channels and preparing the surface for new work neatly as per complete satisfaction of engineer-in-charge. 12mm thick tapered edge gypsum moisture resistant board. Sqm 50.00 2.30 Veneer Ceiling Providing and fixing 4mm thk. veener in ceiling over 12mm thk. marine ply screwed to GI ceiling sections also incorporating 2 x 2 soft wood sections where ever specified as drawing. The work includes P.U. polished of approved shade. The payment area will be the visible area only The work should be complete as per instructions of Architect or Engineer in charge. Sqm 45.00 2.40 Wooden Battens in ceiling Providing and fixing 38-50mm thk. ply wood battens cladded with 4mm thk. teak veener all around and fixed in ceiling screwed to GI ceiling sections also incorporating 2 x 2 soft wood sections where ever specified as drawing. The work includes P.U. polished of approved shade. The payment area will be the visible area only The work should be complete as per instructions of Architect or Engineer in charge. Rmt 40.00 Basic Veneer Price : Rs 85/- 3.00 DOOR / WINDOW WORK. 3.10 UPVC Door & Windows with DG Glass Supplying and fixing in position UPVC Casement windows (one opeining in each window size of diffrent sizes ( visit site for verification ) made out of frame section size of 80 mm in white color with DG Glass 5-12-5 and openable section of 62mm complete in all respects with hardware of Kinlong as approved. Sqm 12.00 3.20 Al. Door with Slim Profile Powder coated Providing and Fixing Casement openable doors with 10mm thk. Toughened glass with Al. slim section frame of 16mm x 45mm including georgian bars (stick on profiles)powder coated in approved shade. Including door closed/patch fitting/handle lock etc/ Sqm 5.00 3.30 Al. Fixed Windows with Slim Profile Powder coated Providing and Fixing Windows with 10mm thk. Toughened glass with Al. slim section frame of 16mm x 45mm including georgian bars (stick on profiles)powder coated in approved shade. Sqm 9.00 3.40 Powder Coated Al. windows Providing and Fixing Windows with 5-6mm thk. glass in Powder coated Al. section frame of 75mm x 45/38mm including openable shutters powder coated in approved shade. Including fitting/handle lock etc. Sqm 14.00 3.5 Flush Doors Providing fully panelled 32mm thk. flush doors along with 2-1/2 x 5 door frames to be finished with 1.0mm laminate of approved shade with1/8 x 1/8 groove asper design, complete in all respects including standard hardware of godrej/hettich/kich/edbo make i.e. hinges.,towerbolts,stopper,handles etc. to the satisfaction of Engg./ Architect Sqm 4.00 4.00 4.10 230mm thick brick masonry Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: . Cement mortar 1:6(1 cement: 6 coarse sand) CUM 0.30 ..... more on document

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB