Tender For Interior Furnishing Work Of Cuttack Main Branch Of Canara Bank, Cuttack-Odisha

Tender For Interior Furnishing Work Of Cuttack Main Branch Of Canara Bank ELECTRICAL MAIN PANEL: Supply, delivery, installation, testing, commissioning, of L&T make indoor wall/ floor mounted type distribution boards made out of 2 mm thk. CRCA sheet metal duely acid treated premised & painted with 2 coats of enamel paint compartment arrangement for each equipment & bus bar chamber on the top of the panel running horizontal through out its length duly lamp, vermin proof having provision cable by conduit entry , earthling stud as per specification mentioned below duly factory wired confirming to the relevant ISS & as per special condition of contract, making good the damages M.S. Cubical type Panel board should have hinged door at the front. The panel shall be provided with all accessories & following arrangements complete in all respect & direction of EIC (Before Placing the Panel order, firstly it passed by the Bank Authority, otherwise it will not considered). It shall have the following: 1.00 Job INCOMER: 1 No.125 Amp. TPN, MCCB (25 KA breaking capacity) with overvoltage protection as incomer for Main supply. Bus bars 150 Amp., 3 phase, 4 strips, 415 volts, 50 Hz. Electrolytic grade Aluminum Bus Bars insulated with colored Heat Shrinkable PVC Sleeves & duly supported on SMC/DMC molded supports with Antitracking barriers. There should be 2 sets of BUS BAR in such a way that AC load should not be connected to GENERATOR power. 100 Amp Onload changeover with 1 Nos 100 amp 25 KA, TP MCCB for DG supply Incomer with 100 amp bus bar. Instruments: TWO set of Digital Multi function Meter (One for Main Power Supply & Other for Generator Supply) of standard make for displaying Input Voltage, Ampere, Power factor, KWH used with CTs. TWO set of Phase indicator lamp (One for Main Power Supply & Other for Generator Supply) Note- 1. All wiring and lugs inside the panel shall be of copper to be fixed using nut-bolt & spring washers. 2. All switchgears shall be properly marked with operaion marks. 3. All MCB to be C series

Refer document

Refer document