Upgradation to the road from Dharapuram Kongur PT - Manakadavu Appanuthu Road to Karattukadu Road Km 0/0 - 2/0 (Working Reach Km 0/0 - 1/900)(R-508) in Dharapuram block of Tiruppur District- 1 Upgradation to the road from Dharapuram Kongur PT - Manakadavu Appanuthu Road to Karattukadu Road Km 0/0 - 2/0 (Working Reach Km 0/0 - 1/900) (R-508)Clearing the light/scrub jungle by uprooting including all cutting charges and disposing of the products and clearing as directed by departmental officers including all incidental charges etc. complete.MORD Specification 111, 112, 201 2 Earth work excavation and depositing on back with an initial of 10m and lift 2m in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth etc., as per SS 20 A including laying and spreading in layers of 250 mm loose thick each, sectioning , wateringand compacting by Power roller to achieve the required Proctor density at 100% compaction at optimum moisture content as determined in occurrence with complete as per MoRD 111, 112, 202, 900, 301, 304 3 Providing and laying Gravel including cost and conveyance of gravel from approved sourcesto work site including labour for spreading , watering and compacting by power roller to achieve the required protect density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., complete. MORDSpecification 111, 112, 401, 900 Km 0/0-1/90 4 Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in subbase/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. 5 Providing and applying Primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 6 Providing and applying Tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface treated with Primer cleaned with Hydraulic broom as per Technical Specification Clause 503.4 7 Bituminous Concrete (BC)BC 25/30/40mm Thick (Grade-II) Using VG30 Bitumen and Plastic Waste ProvidingandlayingBituminousConcreteto25/30/40mmthickusing0.13cumof19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 47.28kgsof VG30 bitumen and 3.02Kgs of Waste Plastic for premixing per 10sqm including cost and conveyance ofallmaterialstoCMPsite,heatingthebitumenandaggregatetorequiredtemperatureand mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mixbytippertruckstopaversite,spreadingthemixtouniformthicknessof40mmwith mechanicalpavertothespecifiedgradesandcrosssectionsandconsolidatedby8-10tonne Vibratorytotherequireddensityetc.,includinglabourforattendingtopavertositeetc., includinghirechargesandfuelchargesfor20-30tCMPwithbitumenboiler,tippertrucks, PaverFinisher,Vibratoryrollerandallothertoolsandplantrequired,includingfuelandall otherincidentalchargesetc.,completeasperspecificationusingCMPasperclause507of MORTH Rev-5 8 Reinforced cement concrete M15 grade Hectometre stone of standard design (size 0.90m x 0.15m x 0.15m) as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 9 Reinforced cement concrete M15 grade kilometre stone of standard design (size 1.65m x 0.45m x 0.15m) as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703Ordinary Kilometer Stone (Precast)specification Clauses 1703 10 RUMBLE STRIPS COVERED WITH BITUMINOUS SURFACEProvision of 15 nos. rumble strips covered with bituminous mixes, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking 11 Providing and fixing of typical MGSMT informatory sign board/ CIB with Logo and Maintenance board as per detailed specifications and drawingcommunicated by the Direcorate of Rural Development and Panchayat Raj 12 GST Amount for providing Service to Government Contract Works for the aboveWorks. { GST Amount is the Total GST Amount for overall quoted amount above this row in column BB for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
