Tender For Electrification Work In Various Places Of Municipal Area Merta City - Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Materia, merta-Rajasthan

Tender For Electrification Work In Various Places Of Municipal Area Merta City - PROVIDING & FIXING OF IK08, IP 66 PROTECTED LED STREET LIGHT LUMINAIRE ON EXISTING BRACKET/POLE. FIXTURE MADE OF POWDER COATED SINGLE PIECE PRESSURE DIE CAST ALUMINUM MATERIAL WITH HEAT DISSIPATION FINS ON HOUSING WITH UV STABILIZED PC (UV STABLIZATION REPORT SUBMITTED FOR UV COVER ) /TOUGHENED GLASS COVER AND SECONDARY LENS ON EACH LED & SHOULD BE SMD TYPE OF 3 TO 5 WATT EACH . THE SYSTEM EFFICACY >=125 LM/ WT AND POTTED DRIVER & HAS A UNIQUE BIS R NUMBER WITH INPUT VOLTAGE AC 120 TO 270 V AC WITH HIGH VOLTAGE CUTOFF @>=300 V AC AND AUTO RESETTING SAFETY , POWER FACTOR >0.95 DRIVER EFFICIENCY >85% ,THD(I) 70 AND CCT 5700K +355K. SURGE PROTECTION SHALL BE MIN ≥ 4 KV INTERNAL AND MIN 10 KV EXTERNAL INSIDE DRIVER COMPARTMENT. DRIVER SHOULD BE PHASE TO PHASE PROTECTION OF 440 V FOR 4 HRS. MANUFACTURES WORD MARK/NAME ENGRAVED/EMBOSSING ON DIE CAST HOUSING TO ALLOW TRACEABILITY/AUTHENTICITY. FIXTURE SHALL BE AS PER IS 10322 COMPLIANCED.OEM MUST HAVE ITS OWN IN HOUSE NABL LAB SETUP FOR ALL TESTING FACILITIES FOR LED FIXTURES. (LM79/LM80) CERTIFICATE/ REPORT WITH LIABLE WARRANTY OF PRODUCT/ACCESSORIES FROM OEM SHALL BE SUBMITTED. ALL AS PER PRE APPROVED BY ENGINEER IN-CHARGE. FOR ADDITIONAL TECHNICAL PARAMETERS OF PRODUCTS/ WORK , REFER ANNEXURE A ATTACHED WITH THIS BSR . 2 LED STREET LIGHT FIXTURE WITH MINIMUM LUMEN OUTPUT 3700 LM 3 LED STREET LIGHT FIXTURE WITH MINIMUM LUMEN OUTPUT 5600 LM 4 LED STREET LIGHT FIXTURE WITH MINIMUM LUMEN OUTPUT 8700 LM 5 LED STREET LIGHT FIXTURE WITH MINIMUM LUMEN OUTPUT 15000 LM 6 PROVIDING & FIXING OF STREET LIGHT BRACKET MADE OUT FROM FOLLOWING SIZE OF B CLASS , MEDIUM CLASS G.I. PIPE CONFIRMING TO IS : 1239 P - 1 ( 2004 ) WITH HEAVY DUTY POLE CLAMP, SADDLES SUITABLE FASTNERS ETC. AS REQUIRED. ALL AS PER PRE APPROVED BY ENGINEER IN-CHARGE. FOR ADDITIONAL TECHNICAL PARAMETERS OF PRODUCTS/ WORK , REFER ANNEXURE A ATTACHED WITH THIS BSR . 7 40 MM DIA. 8 SUPPLY & DRAWING WIRING FOR SUB MAINS ISI MARKED (IS:694) 1100 VOLTS GRADE PVC INSULATED FLAT TWIN CORE SHEATHED SOLID ALUMINIUM CONDUCTOR WITH 10 SWG G.I. SUPPORT WIRE DULY CLIPPED ETC. AS REQUIRED. FOR ADDITIONAL TECHNICAL PARAMETERS OF PRODUCT / WORK REFER ANNEXURE A ATTACHED WITH THIS BSR 9 10.0 SQ.MM

INR 1000 /-

INR 49.91 Lakhs /-