Tender For Repairs To Wooden Joinery, Aluminium Joinery, Tiling, Plastering And Connected Misc B/R Works At ‘A’ & ‘B’ Wing Of Dad Residential Complex Under Age Br-I Of Ge South Pune.; 1 S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30x32x8/10 and of approved quality of finish, ISI marked complete all as specified and directed 2 S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, devided into squares with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive gauze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a), complete all as specified and directed 3 Demolition cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 4 Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed. 5 M & L for preparation of new or previously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and directed. 6 M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof Apex Ultima paint of required shade with silicon additive over and including priming coat of exterior grade of primer on external surfaces of walls etc. complete all as specified and directed 7 M & L for rendering 10mm thick in cement mortar 1:4 on brick / concrete surfaces finished even & smooth with a thin layer of sagol finish, including taking down of old unserviceable plaster, racking out joints, etc. complete all as specified and directed 8 M&L for 5mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth with out using extra cement, including taking down of old unserviceable cement plaster from ceiling, etc. complete all as specified and directed 9 M & L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick / concrete surfaces finished even & smooth with out using extra cement, including taking down of old unserviceable plaster, racking out joints, etc. complete all as specified and directed 10 M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed. 11 M&L for three coats white wash on new plastered surfaces of ceilingincluding preparation of new surfaces,complete as specified and directed. 12 M&L for complete removal of existing treatment by scrubbing down with wire brush, washing from walls and preparing of surface and applying two coats of oil bound distemper over a coat of primer on walls, over and including 2mm thick wall care putty complete all as specified and directed 13 M&L for complete removal of existing treatment by scrubbing down with wire brush, washing from ceilings and preparing of surface and applying two coats of oil bound distemper over a coat of primer on walls, over and including 2mm thick wall care putty complete all as specified and directed 14 S & F in repairs vitreous china squatting Pan Orissa pattern of size 580 mm X 440 mm white with integral foot rests (Excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed. 15 S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed 16 S & Fin repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and directed. 17 S & F in repairs 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts, complete all as specified and directed. 18 S & F in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed. 19 S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe suitable for WHB complete all as specified and directed. 20 S & F in repairs 15 mm bore, 600 mm long PVC connections withPTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed. 21 S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. 22 S & F in repairs 15 mm stop valves, concealed, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. 23 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 24 M&L for mild steel structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed 25 M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, includingpreparation of new steel surfaces, complete all as specified and directed. 26 Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof covering,complete all as specified and directed. 27 S & Froof sheeting pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 28 Supplying, fixing, jointing and testing galvanised iron tubing medium grade including with all fitting & fixtures such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old unserviceable GI water tubing complete all as specified and as directed for the following sizes:-(a). 15mm bore. 29 (b). 20mm dia bore. 30 Excavation in any type of soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 150m and making good disturbed surfaces, complete all as specified and directed. 31 M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed. 32 Taking down angle iron chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 33 Taking down angle iron chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 34 Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed. 35 M&L for 18/19mm thick pre-laminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround complete all as specified and directed 36 S&F in repairs 4mm thick plain or tinted glass, fixed as in three track sliding window’s shutter exc. 0.50 sqm in each pane including replacement of unserviceable rubber beading, shutter lock, handle, bearing and ensure smooth functioning of shutters including taking down & re-fixing of the same after doing the necessary repair in same opening and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge 37 S&F 30 mm flap width continuous piano hinges, mild steel, bright finish or electro galvanised, etc. complete all as specified and directed 38 S&F brass Locks, cupboard, grade I, size 65 mm (2 lever) with two keys complete all as specified and directed 39 M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed 40 M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid over and including 50mm thick stone dust cushioning, laid dry to the profile over rammed sub base, complete all as specified and directed 41 Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each, complete all as specified and directed. 42 Taking down wooden chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 43 Taking down wooden chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 44 S&F 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both side with 3mm thick veneer decorative plywood grade-1 with BWR resin, shade of veneer as approved white ash crown, figured sycamore, red film, Zebroo, white beech, steam beech, white ash maple (light) of truwood or century make, fixed on both faces including all around edges of flush shutter etc complete fixed with nails etc. complete all as specified and directed. 45 S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to following catalogue ofJINDAL or of equivalent make as mentioned in list of makes here-in-after complete all as specified directed by Engr-in-Charge.(a) Bottomframe 20620(b) Top frame & Verrtical 20621(c) Handle (side) 20606(d) Shutter inter lock20724(e) Shutter top & Bottom20844(f) Glazing Clip19352 46 S&F ventilators / louvers with partially gauged shutter using 4 mm thick x10 cm width frosted glass strip with following aluminium powder coated sections confirming to JINDAL catalogue or of equivalent makes as mentioned in list of makes here-in-after with and including necessary rubber beading, cleats and locking arrangements, etc. complete all as specified and directed:-(a) SP-20048 (b) glazing clips-19352 47 S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc completeas specified size of frame 105 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed. 48 S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc completeas specified size of frame 125 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed. 49 S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white,including flush pipe 32 mm dia, complete all as specified and directed. 50 S & F gratings 100 mm dia of PTMT (minimum weight 25 gms), complete all as specified and directed. 51 S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality, complete all as specified and directed. 52 S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed 53 S&F in repairs PVC black colour water tank cover with fixing brackets suitable for 500/1000 ltrs capacity tanks, etc complete all as specified and directed. 54 S & F in repairs 600X450X5.5mm thick size bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complete all as specified and directed. 55 S & F Transparent Glass 7.5 x 7.5 inch as in corner bathroom shelves with bracket (set of 2) (Model-Joyo Cera Gls 132 or equivalent), complete all as specified and directed. 56 S & F 100 mm long butt hinges medium weight, cold rolled mild steel for door shutters, complete all as specified and directed. 57 S & F 75mm long butt hinges medium weight, cold rolled mild steel for door shutters, complete all as specified and directed. 58 S&F 150 mmaluminium anodized barrel tower bolts of extruded section for door shutters, complete all as specified and directed. 59 S&F 100 mmaluminium anodized barrel tower bolts of extruded section for door shutters, complete all as specified and directed. 60 S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed, complete all as specified and directed. 61 S & F 150 mm extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed. 62 S & F 100 mm extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed. 63 Hacking out old broken glass (any thickness size, quality or description ) from Aluminium sliding window, partitions or metal frames and S&F sheet glass 4mm thick ordinary quality tinted / plain fixed with rubber beading or glazing clips etc,as required at site, each paneexc. 0.5 Sqm in area, complete all as specified & as directed . 64 M&L for hasp & staple 75mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed. 65 Taking down / cutting of steel windows shutter by means of gas cutter with out disturbing of sofit / jambs / cills etc of any description n. exc. 1.5 sqm (without taking off guard bar) complete all as specified and as directed. 66 S&F two legged aluminium floor door stepper with rubber shoe 140mm long complete all as specified and directed. 67 S&F in repairs 32/40mm bore dia of discharge waste coupling of PTMT (Half or full threaded (Minimum weight 45 gms, complete all as speciifed and directed. 68 S&F in repair tubular towel rail brass chromium plated 20mm dia D type, 600mm long fixed with brass screws, complete all as specified and directed. 69 Taking down shutters of any description n.exc 1.0 sqm each and resecuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed. 70 Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and resecuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed. 71 Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed. 72 M&L for machine cut cudappah stone slab, 20mm to 25 thick, laid over and including cement screed bed of 15 mm thick in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc complete including dismantlingof old unserviceable stone slab & screed bed and removal of debries etc. up to a distance exceeding 5 Km complete all as specified and directed 73 M&L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.06Sqm but not exceeding 0.11 as in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match including laid over and including 20 mm thick screed bed in CM 1:6 including taking down of old existing unserviceable tiles of any type including screed bed and removing of debries & dismantled materials etc. up to a distance exceeding 5 Km complete all as specified and as directed 74 M&L for coloured glazed ceramics tiles 450x300x7to8mm thickin vertical surfaces such as skirting dado set & jointed in neat cementslurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces of walls with and including triangular filletting in CM 1:4 on top edges including demolition of old unserviceable tiles of any description or thickness laid bedded and pointed in any mortar including backing coat etc and removing of debries etc. etc. up to a distance exceeding 5 Km complete all as specified and as directed. 75 M&L for light shade vitrified ceramic tiles 9-10 mm thick of 600x600mm size as in flooring, set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 with including taking down of old existing unserviceable tiles of any type including screed bed and removing of debries & dismantled materials etc. up to a distance exceeding 5 Km complete all as specified and as directed 76 M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in skirting, set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 with and including triangular filletting in CM 1:4 on top edges including taking down of old existing unserviceable tiles of any type including backing coat and removing of debries & dismantled materials etc. up to a distance exceeding 5 Km complete all as specified and as directed 77 M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick as in steps, jambs, pillars, window cill, cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer of 15 mm thick in CM 1:6 on masonry surfaces, including dismantlingof old unserviceable stone slab / tiles including backing coat / screed bed and removal of debries etc. up to a distance exceeding 5 Km complete all as specified and directed 78 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel complete all as specified and as directed. 79 S&F in repairs, stainless steel, fancy type curtain rod, 20mm bore (Medium weight) with fixedin brackets, stops or rollers etc. complete all as specified and directed. 80 S & F stainless steel fancy type, brackets and end stopes suitable for 20mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match as required, complete all as specified and directed. 81 S&F 32 mm bore PVC waste pipe of 90 cm long suitable for kitchen sink / WHB waste water, etc.complete all as specified and directed. 82 M&L for cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed. 83 M&L soap dish chromium plated brass fixed width brass screws as in repair complete all as specified and directed. 84 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and directed. 85 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. 86 S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to floor/ wall including clamp etc including taking down of old unserviceable pipes, complete all as specified and directed. 87 S&F for 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to floor/ wall including clamp etc including taking down of old unserviceable pipes, complete all as specified and directed. 88 S&F for 40mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to floor/ wall including clamp etc including taking down of old unserviceable pipes, complete all as specified and directed. 89 M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protectionfinishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and directed. 90 S&F PVC (SWR) bends with oval access door of75mm bore, complete all as specified and directed. 91 S&F PVC (SWR) bends with oval access door of110mm bore, complete all as specified and directed. 92 S&F in repairs 75mm dia SWR junction (single T) equal or unequal with door access, complete all as specified and directed. 93 S&F in repairs 110mm dia SWR junction (single T) equal or unequal with door access, complete all as specified and directed. 94 M&L for pruning of vegetation and plants growth on the external wall surfaces / roofs (dia n. exc. 3 inch) and applying Hydrochloric acid on the left over root portion and making good disturbed portion with CM 1:4 or PCC 1:2:4 grouting and finished with two coats of cement base paint to match the existing colour shade, complete all as specified and directed. Note:- The cost of necessary scaffolding up to G+3 height shall be deemed to be included in quoted rates 95 M&L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush to removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles / cracks in floor and wall and injecting injection of CORESEAL 135A/ CORESEAL 135B all as permanufactures insrtuctions complete all as directed by Engr-in-Charge. (Make:- AQYATYTE, CREAT, SEAL, grouting compound of Ashwin Enterprises, GPSS (Ground Penetrating sealing systems) of Saga Polytech or similar brand as approved)
