Tender For Renovation And Painting Work As Per Specification Required For Mecon Limited, Bhilai., Bhilai-Chhattisgarh

Tender For Renovation And Painting Work As Per Specification Required For Mecon Limited, Bhilai. Brick work with common burnt clay / fly ash bricks of class designation min 5 in superstructure above plinth level up to 1st floor level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2 0.00 0.00 0.00 2 FN 1 CEMENT PLASTER (IN FINE SAND) :12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) Sqm 20 0.00 0.00 0.00 3 FN 2 Providing and Applying two or more coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour., all as per specifications and as directed by Engineer In-charge etc. sqm 3200 0.00 0.00 0.00 4 W 1 Removal of existing steel window of approx. size of 1m X 1.5m and replacing the same by providing & fixing 3 track aluminium glazed window (consisting of two parts-Fixed & sliding) including fixing of mosquito net, made out of anodized aluminium section and fixtures, fittings with float glass panes of 5 mm thickness fitted with aluminium clips and rubber gaskets, pasting of SUN-CONTROL FILM of approved shade to the glass panes all complete as per specifications and as directed by the engineer. (Anodizing should confirm to 15 microns minimum). –Window has two parts which shall be as follows: (a) For FIXED PART window having aluminium section of minimum thickness of 1.5mm and profile as per manufacture specification. (b) For SLIDING PART window having frame and sliding sections of minimum thickness of 1.0mm and profile as per manufacturer specification Nos 28 0.00 0.00 0.00 5 WP 1 Chipping concrete/masonary surface upto 13mm for repair of columns, beams, RCC/masonary structures upto 3.5 M from plinth with chisels and cleaning of the same with wire brush, water including scaffolding and applying passivating bond coat of POLYMER LATEX (SBR LATEX) cement slurry(cement consumption @ 1.50 kg/ Sq.M and SBR latex @ 380gm. Sq.M) followed by providing and laying polymer modified high strength cement sand mortar (1:3) in thickness 10mm (average) admixed with approved polymer latex (SBR) upto 3.5 M height from floor level as per specifications and directions of the Engineer. (Cement Consumption @ 5.5 Kg/Sq.M. and SBR Latex @ 400gms/Sq.m.).Note: The following polymer latex (SBR) are approved: 1. STP, 2. FOSROC, 3. Schenectady BECK India Ltd., 4. SIKA, 5. Choksey Chemicals., 6.) SBR of ISO certified Manufacturer. SBR Latex shall have PH value 9.5 +/- 0.5, Solid content 40% +/- 2% and Density minimum 1 Kg/liter. (Quality Assurance Certificate to be produced from the manufacture along with quantity. date of manufacture, batch number, etc.) sqm 20 0.00 0.00 0.00 6 WW 1 Providing & fixing 32mm thick wooden solid core door shutters with approved quality Veneer fixed on both sides with necessary fittings hinges and hydraulic door closer fixed, the work also includes removal of existing door and as per directions of the Engineer Incharge. sqm 7 0.00 0.00 0.00 7 WW2 Providing and fixing wooden panel with 18mm waterproof termite resistant Century, Archid or equivalent make ISI mark commercial ply on teak wood batten frame work and as directed by Engineer-in-charge. Sqm 6 0.00 0.00 0.00 8 WW3 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work as per specification and direction of Engineer-in-Charge. Sqm 100 0.00 0.00 0.00 9 WW4 Cleaning of steel almirahs and steel cabinets to remove dust, rust, and any existing loose paint. Surface preparation through sanding and scrapping as per requirement. Application of a high-quality metal primer, followed by finishing with two or more coats of approved enamel or metal paint by using spray gun in the approved shade, ensuring a smooth, even, and long-lasting finish to restores the almirahs and steel cabinets. Sqm 300 0.00 0.00 0.00 10 WW5 Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality, including cost of adhesive. This work also includes repair and refurbishment of existing wooden cabinets

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB