Tender For Construction of CSC at Kote Gali W.no 07, Panchayat Tanger, Block: Gandhri under SBM-G for the year 2025-26NIT NO:-28 of REW 2025-26 -- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 2 Provinding and laying of dry stone solling 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3;6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 30% boulders 4 Dumping of stones including cost of stones 5 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) and Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 6 Half brick masonry Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 7 Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work in Suspended floor, roofs, balconies etc. with:1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Steel reinforcement for RCC work i/c cuting, bending, binding and placeing in position all complete 9 Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings bases of column 10 Suspended floor roofs etc. 11 Edges of slabs etc. 12 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge 13 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces 14 Providing & laying cement concrete flooring 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete 15 Providing and fixing Ist quality ceramic glazed wall and floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 16 12mm cement plaster on the rough side or half brick wallcement of mix : 1:4 mix(1 cement : 4 fine sand) 17 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 18 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 19 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick 20 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:15 mm dia. nominal bore 21 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 22 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 23 Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock 24 Providing and placing on terrace at all levels polythyele waterstorage tank as per ISI12701 marked with complete lid and fittings. 25 Add provision for providing and fixing PVC Pipes 2.5 inch dia 3m long and 4 inch dia 12m long including Bend, P trap,Elbow,Socket,T, Union,Nipple etc all necessary required fitings with complete job 26 Carriage of Cement 27 Carriage of Sand 28 Carriage of Aggregates 29 Carriage of Stones 30 Carriage of Bricks 31 CIB (citizeninformation board)size 26 x 3 6 x 0 9(above plinth level)with tepered top having 20 degree slope including plaster, paint ,leterring and logos of (SBM) as per instruction of Engineer-in-charge including carriage of material (complete job) => Limited
