Development Of Daradpora Hutments By Way Of Completion Of Main Building And Procurement Of Furniture Fixture And Kitchen Wares Etc-- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement all works apove plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) above Plinth Level incl all carriage from source to site of work. 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 4 Centring and shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platforms.. 5 Dry random rubble masonry with hard stone in foundation and plinth Nallah boulderss without bond sone, incl all carriage upto the site of work. 6 P/F of 3.5 mm thick glass panes in fixed windows/ doors incl wooden beadings complete. 7 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. 8 P/F of insulaiting board ceiling of approved quality (ply wood 12 mm thick) with necessary screws, incl frame work of budloo wood, incl cost of nails & beading all complete, incl all. 9 P/F of 12mm thick P&G Wooden Paneling (imported ) over 12 mm thick ply board incl. KD Wood joints of required size & nails complete with two or more coats of wood polish of approved brand and make to give an even shadeincl cost and carriage of material complete 10 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments.etc. completeSize of tile 600x600 mm 11 Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Raj Nagar plain 12 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble Work 13 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. 14 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge.Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. PN-3 pipe , 20mm OD(SDR-7.4) 15 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge.Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. PN-3 pipe , 25mm OD(SDR-7.4) 16 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall with clamps at 1.00 meterspacing. PN-3 pipe , 40mm OD(SDR-7.4) 17 P/F PVC Soil waste vent pipes 100 mm dia 18 P/F PVC Soil waste vent pipes 75 mm dia 19 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 20 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm. 21 Providing and fixing 15 mm nominal bore C.P. brass angle valve with CP brass wall flange of approved make complete incl cutting making good the walls wherever required. Cera, jaquar, Florentene or Equivalent brand. 22 P/F 600x20mm CP Brass towel rail of approved brand with CP Brackets fixed to wooden cleats with CP brass screws etc incl cutting and making good the wall wherever req. 23 P/F CP Brass Soap dish/tray of approved make incl screws complete. 24 P/F CP Brass single hole mixer of approved brand for washbasin of approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand 25 P/F CP Brass bib cockof approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand 26 P/F of Health faucet having chrome finish of approved brand 27 P/F CP non-telephonic wall mixerof approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand 28 P/F of stainless steel sink of double bowl of size 910x450x200 mm incl sink waste complete job of jindal or any approved brand. 29 P/F of towel ring of approved make 30 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 31 P/F of 15mm dia PVC connection 600 mm long incl end union and washers complete. 32 Providing, Installation, commissioning and testing, Hot water Geyzer of approved make incl fixing with bolts/fastners 25 ltr 33 P/F CP/Stainless steel anti cockroach trap(grating) on floor traps and floor drains with cement mortar, complete in all respects 100 mm dia 34 P/F in position precast RCC manhole cover and frame of required shape and approved quality(square shape- 450mm internal dimension.
