}

Tender For Supply Installation Testing Commissioning Of Online Booster Pumpset At Dwarka Sector 12 Pocket 4 Bps., Delhi-Delhi

Delhi Jal Board has published Tender For Supply Installation Testing Commissioning Of Online Booster Pumpset At Dwarka Sector 12 Pocket 4 Bps.. Submission Date for this Tender is 20-08-2025. Submersible Pump Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

50696395
Tender For Supply Installation Testing Commissioning Of Online Booster Pumpset At Dwarka Sector 12 Pocket 4 Bps.
Tender
Indian
Delhi
Delhi
20-08-2025

Tender Details

supply installation testing commissioning Of Online Booster Pumpset At Dwarka Sector 12 Pocket 4 Bps.- 1 S/o 7.5 HP 3 phase centrifugal mono block pumpset , suction and delivery size as per site requirement,fitted with C.I. impeller with standard fitting suitable with 7.5 HP motor. Make: Kirloskar/ M&P/ DJB approved. 2 S/O DI D/F Sluice Valve -150 mm dia with SS Spindle, 1.0 Make: KBL/IVC /VAG/Dorot/ DJB Approved Make 3 S/O Double Flanged MS Pipe of 150 mm dia as per site requirementMake : JINDAL/TATA / DJB Approved Make 4 S/O Double Flanged MS Pipe of 80 mm dia as per site requirementMake : JINDAL/TATA / DJB Approved Make 5 Fabrication of various MS standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per site requirement. 6 S/O nuts bolts and washers of required size. 7 S/O neoprene packing. 8 Supply of Pressure gauge for delivery side of the pump along with G.I tubing soldering etc as required. Make: H Guru/Fiebig/DJB Approved 9 Making of RCC foundation of the monoblock pump set by cutting the floor level of the chamber up to suitable depth and refilling it with the help of RCC mixture up to suitable height of the suction line including the cost of plastering of newly made foundation etc as required Size of foundation. 10 Earthing of the electrical equipment’s by using suitable size of G.I. strip with the existing earth electrode.including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping. 11 Fabrication / Supply of starter Panel suitable for installation in above enclosure of size 700 X 500 X 200 mm (minimum) made out of 16 SWG CRCA sheets, duly painted with powder coating process suitable for up to 10 to 15 HP Motor / Pumps with Star Delta starting system and having suitable provisions for mounting / fixing of below switchgears, control gears, instruments and complete with the material as below duly installed with their complete connections and inter connections with copper cables / bus bars etc. as per requirement. Make of insertions / Material:- L&T / C&S / BCH / Minilac / AE / DJB Approved:-63 Amp FP MCB 415V AC and manual Phase changeover for incoming supply -1 No, Earth Leakage protection - 01 No., Power Contactor 3 Pole 40 Amp – 3 No, Star Delta Timer -01 no., Over Load Relay for up to 10 HP to 15 Hp ( 9 Amp. To 32 amp.)– 1 No.,Automatic Phase changeover system in case of phase reversal (with 40A Contactors) – 1 set, Current Transformer - 3 No.,Phase Indication Lights & ON/OFF/Trip Indication Light -6 Nos., 6 AMP SP MCB -4 Nos.Start / Stop Push Button -2 Nos., Digital Ampere Meter - 1 No.Digital Volt Meter - 1 No., Ampere Meter Selector Switch – 1 No.Volt Meter Selector Switch – 1 No., 24 hour timerdigital – 01 No.Protection against voltage unbalance and single phasing-1 No.Auto Manual Switch-01 No., Capacitor of 5KVAR -01 No. (Make:- Epcos/Jyoti/L&T/DJB Approved) 12 S/O PVC insulated PVC sheathedcable with Annealed bare copper conductorhaving three core 4 sq mm415/1100V (each roll 100 mtr)Make :- Havells/RR/KEI as per DJB Approved 13 Installation and fixing of the mono block pump sets on the base frame including couple the pump and motor jointing the pump with suction/ delivery line with proper alignment. the job also include fixing of Valves, laying of cable and making thimbling of cable on both ends by 4 sq. mm 6 Nos thimbles as per site requirement, making connection the motor from starter/panel etc i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load in the presence of Engineer In Charge . 14 Testing on load for any leakages in suction line in presence of engineer-in-charge.

Key Value

Document Fees
INR 500 /-
EMD
INR 5600.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail