Supply Installation And Commissioning Of Lab. Equipment For Mechanical Engg Dept , Steam Turbine Power Plant Setup Features • Steam Power Plant And Its Components • Start-Up, Operation And Shut Down Of A Steam Power Plant • Closed Steam-Water Circuit With Feed Water Treatment • Among Others, Determining: O Boiler Efficiency O Mechanical/Thermal Efficiency Of The Turbine O Condenser Efficiency O Specific Fuel Consumption Of The Plant Specification Steam Generator • Steam Output: 200Kg/H At 11Bar • Fuel Consumption: 12L/H • Heat-Up Time: 8Min • Pressure: 13Bar Super Heater • Power: 7Kw Single-Stage Axial Turbine With Curtis Wheel And Hydraulic Speed Regulator • Power: Max. 1,5Kw At 3000Min-1 Water-Cooled Condenser • Cooling Capacity: 98Kw • Transfer Surface: 2,5M2 Measuring Ranges • Temperature: 9X 0…400°C, 2X 0…100°C • Flow Rate: 0…167L/Min (Cooling Water) • Pressure: 3X 0…16Bar, 1X ±1Bar • Torque: 0…20Nm • Speed: 0…4000Min-1 400V, 50Hz, 3 Phases 400V, 60Hz, 3 Phases, 230V, 60Hz, 3 Phases Dimensions And Weight • L X W X H: 3500X 2500 X 2250 Mm Weight (Approx.): 2250 Kg , Rotary Air Compressor Test Bench Features: • To Study All Components/Accessories Used In Rotary Air Compressor. • To Study & Determine Isentropic Work, Actual Work Volumetric • Efficiency, Isentropic Efficiency & Free Air Delivery At Different Delivery Pressure. • To Plot Volumetric Efficiency/Isentropic Efficiency Against Delivery Pressure & Comment On The Nature Of The Plot. Observations Can Be Taken By Air Compressed In Storage& Free Condition. • Instrumentation: Sensors With Digital Displays • Software For Data Acquisition Via Usb Specifications: • Vane Compressor – Rotary Compressor, Driven By 3 Hp Motor. • Calibrated Orifice Meter With Water Manometer To Measure Air Intake. • Energy Meter To Measure Input Of The Meter. • Pressure Gauge To Measure Discharge Pressure. • Control Valve At Delivery Side. • Stop Clock. Dimensions And Weight: • L X W X H: 1500X 1500 X 1250 Mm Weight (Approx.): 320Kg , Marcet Boiler Test Apparatus Features: • Recording The Vapour Pressure Curve Of Water • Presentation Of The Relationship Between Pressure And Temperature In A Closed System • Temperature And Pressure Measurement Specification: Bourdon Tube Pressure Gauge: -1…24Bar Temperature Limiter: 200°C Safety Valve: 20Bar Heater: 2Kw Boiler, Stainless Steel: 2L Measuring Ranges • Temperature: 0…200°C • Pressure: 0…20Bar 230V, 50Hz, 1 Phase 230V, 60Hz, 1 Phase 120V, 60Hz, 1 Phase Dimensions And Weight: • L X W X H: 800X 600 X 600 Mm Weight (Approx.): 45 Kg , Slip & Creep Apparatus Material: Stainless Steel Motor Type: Dc Power : 1 Hp Speed: 1500 Rpm , Universal Governor Apparatus Type: Digital Driven Type: Pulley Material: Steel Display: Digital Spindle Material: Stainless Steel Power Source: Electric Motor Type: Dc Voltage: 220 V , Motorized Gyroscope Apparatus Material: Steel Disc Material: Stainless Steel Disc Diameter: 300 Mm Thickness:12 Mm Weights: 2 Kg, 1 Kg, 1/2 Kg, Driven Type: Motorised , Static & Dynamic Balancing Apparatus Material: Stainless Steel Display: Analog Drive Motor: Fhp Motor , Radical Angle Dekkor Unit Radical Angle Dekkor Unit Comes With Objective Lens Aperture Of 28Mm. Measuring Range Of 10 Mtr. Read Out Of 1 Mtr. Telescope Length Of 250Mm. Brass Body Of 240X300mm, Closed Grains Casting Hardened, Stabilities And Scrapped. Light Source Of 6V 15W.Ardened 1) Focal Length Of Objective 220Mm. 2) Clear Aperture Of Objective: 40Mm 3) Magnification: 11X. 4) Measuring Range: 60-0-60 Minute In X-Y Axis. 5) Least Division On Of Arc Raticle : 1 Minute 6) Least Division With Micrometer Drum: 2 Second Of Arc , Cylinder Bore Gauge 50 To 150Mm Range (Metrology Calibrated With Dial Indicator 0.001” Increments) , Thickness Gauge (Ultrasonic Type) Resolution: 0.01 Mm (0.001 Inch) For Thickness Upto 99.99 Mm Memory Capacity: 5000 Readings , Auto Colimator Auto Colimator G.G. Make Autocollimator A.A. 10 Is A Versatile Model Capable Of Meeting Various Measuring Requirements Involving Small Angles & Displacements In Linear & Flatness Testing. A. Collimator Unit. Objective Lens Aperture. :25 Mm. • Focal Length:300 Mm. Telescope Length: 375 Mm. Telescope Barrel Diameter: 38 Mm. • Magnification:10 X. Measuring Graticule Division.: 1’ (Minute). • Micrometer Least-Count.:10” (Seconds). • Target Graticule: Plain Cross. • Electric Supply: A 220-240V.,50 Hz. Supply Is Required. A 220-6V. Step-Down Transformer Is Provided Along-With The Unit. • Illuminator: 6 V- 10 Wattshalogen Bulb Is Used. Body: Powder Coated & Chrome Plated. B.Stand • Vertical Movement: 100Mm, By Hard -Chrome & Plated Finely Ground Lead-Screw. • Horizontal Rotation: 360 0, About Axis Of The Lead -Screw. Vertical Rotation:360 0. , Pneumatic Comparator Accurate ‘C’ Jet. Dial Type Air Gauge Unit Range ±0.001Mm Oil & Moisture Removal Filters Set Unit Outlet Hose, Cock Valve, Pressure Indicator. , Electrical & Electronic Comparator • Base Steel Fabricated & Powder Coated, Size 150 X 180 X 50 Mm • Stand: Dia 25 Mm Hardened Ground & Lapped, Chrome Plated Bar With A Height Of 100 Mm , Digital Comparator Din 878 • Accuracy: 0.001 Mm • Measurement Range: 0 – 12.5 Mm • Lcd Display: 6 Mm , Sensor/Transducer Trainer Kit Sensor/Transducer Trainer Kit Designed With Abs Injection Moulded Sturdy Electronic Desk With Input Power Supply Of 230V,50 Hz Built In Output Power Supply: +/- 12V, 500Ma, Variable 5V To 14 V @3Amp Provided With Following Sensors: A) Pressure: Piezo Resistive Transducer For Pressure Measurement( 0 To 15Psi) With Pressure Generating Hand Pump, Signal Conditioner And Proper Patching Cords. B) Force/Weight Measurement: Strain Gauge Type (0 To 10 Kg) With Signal Conditioner And Output For Multimeter Display C) Displacement Sensing: Sliding Pot (0-50 Mm), Rotary Pot(0 To 1800) And Lvdt Transducer(0 To 20Mm) With Signal Conditioner And Proper Output To Read With Digital Multimeter. D) Level Measurement: Float Type(0 To 100Mm) With Signal Conditioner And Output E) Speed Sensor: 12 V Dc Motor (0-1500Rpm) With Optical Sensor3 ½ Digit Digital Display
