|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and rendering 12mm thick 1:4 cement plaster using cement slurry on fair faces of brick workCement Make- ACC, lafarge, KC or equivalent.Test certificate of cementis required during sample approval. Specifications of material used should conform to clause no. 4.3,4.4 & their sub clauses of MES SSR 2009, Part-1 |
| 2 | M&L for applying 3mm thick wall care putty on walls |
| 3 | M&L for priming surface using primer chalk whiting, on new plastered or other surfaces on walls, preparatory to painting including prepration work as approved or directed All the work must be executed as perclause no. 15.12subclause no. 15.12.2 ,15.12.3 , 15.12.5 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work. |
| 4 | M&L for prepration and applying two coats of Interior acrylic emulsion paint over old painted Surfaces of any description over 10cm girth or width, not otherwise describedAll the work must be executed as per conditions of MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.Make: Asian, Berger, Nerolac, Indigo or equivalent |
| 5 | M&L for applying 02 coats of synthetic enamel paint over wood or wood based surfaces of any description over 10cm girth or width, not otherwise described including prepration of old painted surfaces.All the work must be executed as perclause no. 17.6 & 17.10 subclause no. 17.6.4,17.6.5, 17.10.1 & 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.Make: Asian, Berger, Nerolac, Indigo or equivalent |
| 6 | M&L for applying 02 coats of synthetic enamel paint over steel and iron surfaces of any description over 10cm girth or width, not otherwise described including prepration of old painted surfaces material and shade as approved by EIC before use in work. All the work must be executed as perclause no. 17.8 & 17.10 subclause no. 17.8.5, 17.8.6, 17.10.1 & 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.Make: Asian, Berger, Nerolac, Indigo or equivalent |
| 7 | M&L for prepration and applying two coats of Exterior emulsion paint over old painted Surfaces of any description over 10cm girth or width, not otherwise describedAll the work must be executed as per conditions of MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.Make: Asian, Berger, Nerolac, Indigo or equivalent |
| 8 | M&L for applying 02 two coats of synthetic enamel paint on old painted surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including prepration workAll the work must be executed as perclause no. 17.6 & 17.10 subclause no. 17.6.4,17.6.5, 17.10.1 & 17.10.2 & other related conditions as per MES SSR Part-1-2009. Quality assurance certificate from manufacturer must be provide before execution of work.Make: Asian, Berger, Nerolac, Indigo or equivalent |
