Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE ADDON 1050W-750D-900HRate (Rs.) : 5163.82 |
| 2 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE ADDON 1200W-750D-900HRate (Rs.) : 5377.82 |
| 3 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE MAIN 1200W-750D-900HRate (Rs.) : 6961.42 |
| 4 | NS Item -Providing Under bench cabinets which are Pure epoxy powder coated with thickness of 40-60 microns and will be suspended from tubular structure. The cabinet will have a corrosion resistance magnetic strip as shutter catch, shutter and drawer are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet.Unit Construction : It will be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8 mm and drawer separator should be of 1.2mm thick.Shelf : Will be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm.Shutter will be over-closing type. It has a sandwich door construction with shutter front and shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening. Drawer: Will be welded single piece construction with over-closing sandwich drawer front filled with 15mm thick paper honeycomb for sound dampening. Units will be in 450mm and 600mm widths. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.UNDERBENCH CABINET 600W-450D-674H 2S 1DRate (Rs.) : 17023.70 |
| 5 | NS Item -Providing and supply of Welded Top Units : Over head cabinets are Pure epoxy powder coated with thickness of 40-60 microns and should be fixed on the wall. The cabinet will have a corrosion resistance magnetic strip as shutter catch, shutters are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet.Unit Construction : It will be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8 mm.Shelf : will be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm.Shutter will be over-closing type. It has a sandwich door construction with shutter front and shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening.Units will be in 450mm and 600mm widths. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.WALL CABINET 600W-320D-674H 2SRate (Rs.) : 13262.65 |
| 6 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.LEG SPACE PANEL SET 1050W-900HRate (Rs.) : 3250.66 |
| 7 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.LEG SPACE PANEL SET 600W-900HRate (Rs.) : 2227.74 |
| 8 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.REAR SIDE PANEL SET 750D-900HRate (Rs.) : 2194.57 |
| 9 | NS Item -Providing and supply of electrical trunking: Using for housingelectrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made fromCRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. Granite Work Top : It shall be 19mm ( plus/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Table Mounted Trunking along with worktop of table and Electrical accessoriesRate (Rs.) : 9947.00 |
| 10 | NS Item -Providing and Placing in place of conference table of follwoing specifications. The overall dimensions of the table shall be 2100 x 1200 x 750mm. These terminating leg structure shall be in M.S. CRCA sheet/tubes/rods as per IS. 513/7138/432 finished with epoxy power coating of the approved colour as per the project designer. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Cross members in the Upbeat system are made from 50 mm x 25 mm x 1.2 mm thick. Cross members are assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of 165 mm from worktop sides. Wire management: Wire tray with integrated power box made with a combination of 0.6 mm thick CRCA outer body and 0.8 mm thick CRCA switch plate (8 plus 3 Anchor Roma) module cut out as standard.They are mounted on worktop. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) and BIFMA LEVEL certified. The product shall be of Godrej/ Haworth/ Steelcase make only.Library Table 2100x1200Rate (Rs.) : 30250.00 |
| 11 | NS Item -The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D), The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm. BACK SIZE: 48.00 cm(W) x 57.60 cm (H).,The polyurethane foam for seat is of density= 48 ± 3kg/m. The armrest is made of injection moulded Polypropylene which is connecting seat and back . The mechanism is designed with the following features:*360° revolving type.*Centre - Tilt.*Tilt with upright lock. The pneumatic height adjustment has a stroke of 10 ± 0.5cm. The pedestal is injection moulded Polyamide and fitted with 5 nos.twin wheel castors. The pedestal is 66.1 ±0.5 cm P.C.D. The twin wheel castors are injection moulded in black Polyamide having 6.0± 0.1 cm wheel Diameter.Company should be ISO9001,14001,45001,50001, BIFMA, AIOTA and Greenguard Certified. Product should be Greenguard(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only.Library ChairRate (Rs.) : 6300.00 |
| 12 | NS Item -Body - a. Side panels, Frame and Cross L bracket are made using 0.8 mm CRCA (IS:513).b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade.c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLTref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glueUnder Structure - Under structure is made of 0.8m CRCA (IS:513).Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513).b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below.c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit.d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down constructionFinish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800WShelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product should be Greenguard (UL) certified.The product shall be of Godrej/ Haworth/ Steelcase make only.Single sided rack 1200W x 295DRate (Rs.) : 20791.00 |
| 13 | NS Item -Body - a. Side panels, Frame and Cross L bracket are made using 0.8 mm CRCA (IS:513).b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade.c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLTref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glueUnder Structure - Under structure is made of 0.8m CRCA (IS:513).Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513).b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below.c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit.d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down constructionFinish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800WShelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product should be Greenguard (UL) certified.The product shall be of Godrej/ Haworth/ Steelcase make only.Double sided rack 1200W x 590DRate (Rs.) : 33766.00 |
| 14 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE ADDON 1500W-750D-900HRate (Rs.) : 5955.62 |
| 15 | NS Item -Providing Fixed Reagent Shelves: It will be complete modular design consisting of 2 stage horizontal storage shelves. 270mm gap to be maintained between two shelves. Reagent shelf post will have a cross section of 115mm x 30mm hollow structure of 1.2mm thick. Welded frames to be screw fitted between two posts and to be made of 1.2 mm thick. And, metal shelves of 0.8mm thick CRCA MS with pure epoxy powder coating sheets to kept in between the frames. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.REAGENT SHELF ISLAND MAIN 1200WRate (Rs.) : 13872.55 |
| 16 | NS Item -Providing Fixed Reagent Shelves: It will be complete modular design consisting of 2 stage horizontal storage shelves. 270mm gap to be maintained between two shelves. Reagent shelf post will have a cross section of 115mm x 30mm hollow structure of 1.2mm thick. Welded frames to be screw fitted between two posts and to be made of 1.2 mm thick. And, metal shelves of 0.8mm thick CRCA MS with pure epoxy powder coating sheets to kept in between the frames. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.REAGENT SHELF ISLAND MAIN 1500WRate (Rs.) : 14867.65 |
| 17 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.LEG SPACE PANEL SET 750W-900HRate (Rs.) : 2556.23 |
| 18 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.ISLAND SIDE PANEL SET 1500W-900HRate (Rs.) : 2375.40 |
| 19 | NS Item -Providing and supply of electrical trunking: Using for housingelectrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made fromCRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. Granite Work Top : It shall be 19mm ( plus/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Table Mounted Trunking along with worktop of table and Electrical accessories..Rate (Rs.) : 22913.00 |
| 20 | NS Item -Providing and supply of Sink, Faucets and Accessories : Polypropylene moulded sinks are made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. Standard bowl size (L x W x D) is 500 x 400 x 300 mm. Faucet shall be 3-way or 1-way type faucet of approved make. Service fittings are of laboratory grade, and water faucets and valve bodies are of cast red brass alloy or bronze forgings, all fittings are of powder plated unless specified otherwise. OEM should beISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D)Rate (Rs.) : 2910.40 |
| 21 | NS Item -Providing and supply of Sink, Faucets and Accessories : Polypropylene moulded sinks are made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. Standard bowl size (L x W x D) is 500 x 400 x 300 mm. Faucet shall be 3-way or 1-way type faucet of approved make. Service fittings are of laboratory grade, and water faucets and valve bodies are of cast red brass alloy or bronze forgings, all fittings are of powder plated unless specified otherwise. OEM should beISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.3 Way Water Faucet Bench Mounted, 8`` Swing Gooseneck Model No. 100/32Rate (Rs.) : 9505.88 |
| 22 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Emergency Eye Wash - 2 Way, Deck Mounted (Drench Hose Unit) With Braided Stainless Steel Hose Model No. 100-36 granite worktop of table and Electrical accessoriesRate (Rs.) : 13169.00 |
| 23 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Body/Eye Shower, free standingModel no:17956009Rate (Rs.) : 284471.27 |
| 24 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Bracket for island tableRate (Rs.) : 181.90 |
| 25 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE ADDON 600W-750D-900HRate (Rs.) : 4569.97 |
| 26 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. Work Top : It shall be 19mm ( plus /- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and havingSEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.REAR SIDE PANEL SET 750D-900H with granite worktop of table and Electrical accessoriesRate (Rs.) : 7635.00 |
| 27 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.SMT-600W-750D-900HRate (Rs.) : 7001.01 |
| 28 | NS Item -Providing and supply of electrical trunking: Using for housing electrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Table Mounted TrunkingRate (Rs.) : 1370.67 |
| 29 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.SIDE PANEL FOR SINK UNITRate (Rs.) : 1732.33 |
| 30 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.INLINE SINK UNIT FOR STAND AWAY TABLE 750W x 900D x 900HRate (Rs.) : 13375.00 |
| 31 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.INLINE SINK UNIT 750W x 750D x 900HRate (Rs.) : 13232.69 |
| 32 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Emergency Eye Wash - 2 Way, Deck Mounted (Drench Hose Unit) With Braided Stainless Steel Hose Model No. 100-36 including granite worktop of table and Electrical accessoriesRate (Rs.) : 39169.00 |
| 33 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.5 FEET BENCHTOP ABP AEOLUS FUME HOOD WITHOUT ANY ACCESSORIESRate (Rs.) : 220594.41 |
| 34 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Airflow monitor for FumehoodRate (Rs.) : 72913.01 |
| 35 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Anti-Siphon Bottle Trap Model : S 04 Make: PremierRate (Rs.) : 539.28 |
| 36 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Apparatus Grid For 5 Feet Benchtop Aeolus Fumehood (Epoxy)Rate (Rs.) : 13790.16 |
| 37 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Ceiling Front Cover Panel For 5 Feet Aeolus FumehoodRate (Rs.) : 2229.88 |
| 38 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Ceiling LH/ RH Side Cover Panel For Aeolus FumehoodRate (Rs.) : 1291.49 |
| 39 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Compressed Air (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)Rate (Rs.) : 21924.56 |
| 40 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Eco Panel (0.75 To 1 Hp)With Tl/ Bl For Aeolus FumehoodRate (Rs.) : 61241.45 |
| 41 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.FIXED TYPE APPARATUS STORAGE CABINET FOR BENCH TOP ENHANCED FUME HOOD (750 WIDTH)Rate (Rs.) : 24545.80 |
| 42 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Flexible/F Serated Connector Model : Hp 01 Make: PremierRate (Rs.) : 557.47 |
| 43 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.LED LIGHT FOR 4 TO 6 FT AEOLUS FUMEHOODRate (Rs.) : 12101.70 |
| 44 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Nitrogen (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)Rate (Rs.) : 21994.56 |
| 45 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.RAW Water (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)Rate (Rs.) : 21924.56 |
| 46 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Rear Support Panel Offixed Type Apparatus Storage Cabinet For Benchtop Aeolus FumehoodRate (Rs.) : 3859.49 |
| 47 | NS Item -Centrifugal Fan with Housing in PP Construction and suitable stand in MS Zinc Plating with Powder Coating.Inlet/Outlet Dia: 400mm Impeller Dia: 400mmNon FLP Motor: 3 HP 1400 RPMCFM: 2600 @ 50 WCMM Static PressureMotor make : IE2 (Non FLP), Crompton Greaves/Bharat Bijlee make whichever is availableDB Level: 85 ApproxMotor Description: IP55, 3 Phase, 440 Volt , 50 Hz. Weather cover for motor of model For PP40 ModelAnti-Vibration Pads and M10x100 pin type Anchor Fasteners. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified.Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Rate (Rs.) : 144842.50 |
| 48 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hose FLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH– Corrosion resistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and½” IPS U.S. made PVC coated brass stay open ball valves, and polishedstainless steel pull rod. Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly. Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified.Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only. Anti-Vibration Pads and M10x100 pin type Anchor FastenersRate (Rs.) : 3309.24 |
| 49 | NS Item -Providing and supply of Eye Wash and Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.DECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hoseFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosionresistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod.Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly.Unit shall include ANSI compliant sign. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Blower Weather Cowl (FRP Outlet) and MS Stack Support with required Clamps PP40-3014...Rate (Rs.) : 18519.60 |
| 50 | NS Item -Providing Under bench cabinets which are Pure epoxy powder coated with thickness of 40-60 microns and will be suspended from tubular structure. The cabinet will have a corrosion resistance magnetic strip as shutter catch, shutter and drawer are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet.Unit Construction : It will be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8 mm and drawer separator should be of 1.2mm thick.Shelf : Will be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm.Shutter will be over-closing type. It has a sandwich door construction with shutter front and shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening.Drawer: Will be welded single piece construction with over-closing sandwich drawer front filled with 15mm thick paper honeycomb for sound dampening.Units will be in 450mm and 600mm widths.OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.UNDERBENCH CABINET 450W-450D-674H 1S 1D LH/RHRate (Rs.) : 13674.60 |
| 51 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.CORNER TABLE CABINET FILLER PANEL FOR CABINET 900HRate (Rs.) : 1550.43 |
| 52 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.CORNER TABLE PIPE FRAME 750D-900HRate (Rs.) : 9781.94 |
| 53 | NS Item -Providing and supply of electrical trunking: Using for housing electrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Table Mounted Trunking including granite worktop of table and Electrical accessoriesRate (Rs.) : 10123.00 |
| 54 | NS Item -Providing and supply of electrical trunking: Using for housing electrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make onlyTable Mounted Trunking including granite worktop of table and Electrical accessoriesRate (Rs.) : 10977.00 |
| 55 | NS Item -Providing and supply of electrical trunking: Using for housingelectrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made fromCRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. Granite Work Top : It shall be 19mm ( plus/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only...Table Mounted Trunking along with worktop of table and Electrical accessoriesRate (Rs.) : 45242.00 |
| 56 | NS Item -Providing D-Frames manufactured from standard hollow metal sections: confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout.Horizontal Members are made from square pipes of 1.6 mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two D-Frames together as shown using C-clamps/U-clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 1050, 1200, and 1500. OEM should be ISO-9001, 14001, 45001,50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.TABLE ADDON 450W-750D-900HRate (Rs.) : 4405.19 |
| 57 | NS Item -Providing and supply of Welded Top Units : Over head cabinets are Pure epoxy powder coated with thickness of 40-60 microns and should be fixed on the wall. The cabinet will have a corrosion resistance magnetic strip as shutter catch, shutters are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet.Unit Construction : It will be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8 mm.Shelf : will be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm.Shutter will be over-closing type. It has a sandwich door construction with shutter front and shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening.Units will be in 450mm and 600mm widths. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.WALL CABINET 450W-320D-674H 1S RHRate (Rs.) : 10176.77 |
| 58 | NS Item -All leg-space panels, rear cover panels, island side panels etc. should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.LEG SPACE PANEL SET 450W-900HRate (Rs.) : 1979.50 |
| 59 | NS Item -Providing and supply of electrical trunking: Using for housingelectrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made fromCRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. Granite Work Top : It shall be 19mm ( plus/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make onlyTable Mounted Trunking along with worktop of table and Electrical accessories..Rate (Rs.) : 9848.00 |
| 60 | NS Item -Providing and supply of Balance Table : The table consists of following parts:Tubular frame - Completely modular type tubular frame, which carries the load of kadappa and granite, kept on it. High-tension Pan head M6 Zinc black-coated screws (for better corrosion resistance) are used for the fastening. The material used is: 40Sq x 1.6 mm thick ERW tube and the overall load carrying capacity of tubular frame is 250 kgs of uniform distributed load.Cover Panels – They are 0.8 mm thick CRCA MS sheet and pre-treated and epoxy powder coated for better corrosion resistance. The thickness of powder coat is 45-50 microns which passes the test of Salt Spray for 1000 Hours and having the Scratch Hardness of 3 Kgs.Kadappa - 25mm thick Kadappa acts as the shock-dampening component. Work Surface – graniteVibration Isolating Rubber pads - The objective of using these rubber pads is to absorb the pulsating vibrations coming from the floor .The pads are made up from combination of nitrite rubber, cork particles and cross linked polyester fiber. This high-grade compound material possesses all the physical and mechanical properties required to minimize the dampening effect.Levelling screws - The Tubular frame has the provision for 4 height adjusters or Levelling Screws that take careof all levelling aspects.Size: (Width: 600/900mm, Depth: 600mm, Height: 750/900mm). OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Balance Table-1- 900 X 600 X 900MMRate (Rs.) : 75549.49 |
| 61 | NS Item -Providing and supply of Balance Table : The table consists of following parts:Tubular frame - Completely modular type tubular frame, which carries the load of kadappa and granite, kept on it. High-tension Pan head M6 Zinc black-coated screws (for better corrosion resistance) are used for the fastening. The material used is: 40Sq x 1.6 mm thick ERW tube and the overall load carrying capacity of tubular frame is 250 kgs of uniform distributed load.Cover Panels – They are 0.8 mm thick CRCA MS sheet and pre-treated and epoxy powder coated for better corrosion resistance. The thickness of powder coat is 45-50 microns which passes the test of Salt Spray for 1000 Hours and having the Scratch Hardness of 3 Kgs.Kadappa - 25mm thick Kadappa acts as the shock-dampening component. Work Surface – graniteVibration Isolating Rubber pads - The objective of using these rubber pads is to absorb the pulsating vibrations coming from the floor .The pads are made up from combination of nitrite rubber, cork particles and cross linked polyester fiber. This high-grade compound material possesses all the physical and mechanical properties required to minimize the dampening effect.Levelling screws - The Tubular frame has the provision for 4 height adjusters or Levelling Screws that take careof all levelling aspects.Size: (Width: 600/900mm, Depth: 600mm, Height: 750/900mm). OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Balance Table-1- 900 X 600 X 900MM..Rate (Rs.) : 7186.12 |
| 62 | NS Item -Providing and supply of electrical trunking: Using for housingelectrical switches and sockets, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body. It should be available in both, single sided and double-sided configurations. It should be made fromCRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. Granite Work Top : It shall be 19mm ( plus/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only...Table Mounted Trunking along with worktop of table and Electrical accessories.Rate (Rs.) : 10014.00 |
| 63 | NS Item -Design, supply and Installation of PP-FRP ducting of wall thickness 3mm PPGLplus3mm FRP for sizes up to 500mm Dia, Above 501mm Dia 4mm PPGLplus4 mm FRP shall be used unless otherwise specified. Including clamps, hanging support, all hardwares required to complete ducting work (PP FRP Ducting of 3mm plus 3mm). OEM should be ISO-9001, 14001, 45001, 50001, Greenguard BIFMA and AIOTA certified. Product Should be SEFA 8M, SEFA-10, EN13150 and EN14727 certified from certified agency and having SEFA membership from last 10 Years. The product shall be of Godrej/ Haworth/ Steelcase make only.Rate (Rs.) : 10764.00 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
