|
| 1 | Excavation in trenches in hard/dense soilnot exceeding 1.5 mtr width and not exc 1.5 mtr deepfor laying of pipe Hard dense soil etc and getting out allas specified. |
| 2 | Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick hard soil all as specified and directed by Engr-in-charge. |
| 3 | Removing surplus soil to a distance 150mtr and deposit where directed at alevel not exceeding 1.5 mtr above the starting point. |
| 4 | Supply and fixing of GI Tubes, \"medium grade\" 15 mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or under floors, complete all as specified and as directed. |
| 5 | Supply and fixing of GI Tubes, \"medium grade\" 20 mm bore, ISI marked including all fitting such as sockets, bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches complete all as specified and as directed. |
| 6 | Supply and fixing of GI Tubes, \"medium grade\" 25 mm bore, ISI marked including all fitting such as sockets, bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches complete all as specified and as directed. |
| 7 | Supply and fixing of GI Tubes, \"medium grade\" 40 mm bore, ISI marked including all fitting such as sockets, bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches complete all as specified and as directed. |
| 8 | Supply and fixing of GI Tubes, \"medium grade\" 50 mm bore, ISI marked including all fitting such as sockets, bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches complete all as specified and as directed. |
| 9 | Supply and fixing of GI Tubes, \"medium grade\" 80 mm bore, ISI marked including all fitting such as sockets, bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches complete all as specified and as directed. |
| 10 | Supply and fixing of GI Tubes, \"medium grade\" 100mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts and including galvanised iron flange without thread (02 Nos in each pipe with rubber washer) with nuts, bolts and washers including with welding work etc, laid in trenches complete all as specified and as directed. |
| 11 | Supply and fixing of GI Tubes, \"medium grade\" 150 mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts and including galvanised iron flange without thread (02 Nos in each pipe with rubber washer) with nuts, bolts and washers including with welding work etc, laid in trenches complete all as specified and as directed. |
| 12 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 15 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 13 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 20 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 14 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 25 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 15 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 40 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 16 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 50 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 17 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 80 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 18 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 100 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 19 | Taking up or down from existing locations, old/unserviceable galvanised steel tubing of 150 mm bore pipe, and connections, any type, including jointing materials, complete all as specified and as directed. |
| 20 | Supply and fixing in replacement of old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15 mm bore pipe line, complete all as specified and as directed. |
| 21 | Supply and fixing in replacement of old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe line, complete all as specified and as directed. |
| 22 | Supply and fixing in replacement of old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe line, complete all as specified and as directed. |
| 23 | Supply and fixing in replacement of old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40 mm bore pipe line, complete all as specified and as directed. |
| 24 | Supply and fixing in replacement of old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50 mm bore pipe line, complete all as specified and as directed. |
| 25 | S&F in repair of cast iron sluice valve of size 80 mm bore class-I PN-1.6 with gun metal spindle both end flanged complete with all fitting all as specified and directed by Engr in Charge. |
| 26 | S&F in repair of cast iron sluice valve of size 100 mm bore class-I PN-1.6 with gun metal spindle both end flanged complete with all fitting all as specified and directed by Engr in Charge. |
| 27 | S&F in repair of cast iron sluice valve of size 150 mm bore class-I PN-1.6 with gun metal spindle both end flanged complete with all fitting all as specified and directed by Engr in Charge. |
| 28 | M&L for construction of PCC block walling valve pit of size 900mm x 900mm x 1200mm (internal dimension) with precast cement concrete block and 10 mm thick rendering in cement mortar 1:4 on internal and exposed external surfaces with and including 40 x 40 x 6 mm mild steel angle iron frame and 3 mm thick MS sheet cover with locking arrangement and 1 No 50 mm size 4 lever lock with key in duplicate complete all as specifiled and as directed by Engr-in-Charge including demolition of existing valve pit. |
| 29 | M&L for construction of PCC block walling valve pit of size 600mm x 600mm x 600mm (internal dimension) with precast cement concrete block and 10 mm thick rendering in cement mortar 1:4 on internal and exposed external surfaces with and including 40 x 40 x 6 mm mild steel angle iron frame and 3 mm thick MS sheet cover with locking arrangement and 1 No 50 mm size 4 lever lock with key in duplicate complete all as specifiled and as directed by Engr-in-Charge including demolition of existing. |
| 30 | Supply & fixing in repair of Cast iron air release valve with two air outlet, 100 mm dia to 100 mm dia bore of air release valve all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply & fixing in repair of Cast iron air release valve with two air outlet, 80 mm dia to 80 mm dia bore of air release valve all as specified and as directed by Engineer-in-Charge. |
| 32 | Cutting the existing road/hardstanding of suitable length & width for laying pipe line and making good the disturbed surface level with PCC 1:2:4 type B2 (using 40 mm graded crushed stone aggregate) the road/hardstanding exactly making to the existing road/hardstanding complete all as specified and as directed. |
| 33 | S&F in Repairs 100 mm bore dia heavy duty Ultra high molecular weight polythylene (UHMWPE) pipe for water supply having nontoxic, sliding friction and self lubricating qualities, double layered having thermal stability for cold waterwith 02 Nos connector, flange gasket, suitable size flange nut and bolts complete for every set of pipe both side with clamps threaded including allfittings laid in wall, floor, nalah complete all as specfied and directed . |
| 34 | Supply and fixing water chlorinator (Stequa Pack Pro V2) Automatic erosion feed enabled water sanitizer / conditioning treatment station with proportional dosing arrangement consisting of:1) Receptacle with following attachments:a) Station Holding Assembly (b) Water Inlet Regulator (c) Overflow Vent (d) Drain valve (e) Fluid Level controller with In-built Level Switch (f) Sludge Level Gauge g) Station Base Assembly with Station Base Buffer (h) Material of construction: Non-metallic thermoplastic (i) Maximum Temperature: 45°C(j) Capacity: 100 litres k) Shape: Cylindrical2) Station Hood Assembly with multi-cavity arrangement as under: a) Custom cover (b) Refill Cavity Lids c) Electrically powered drive unit with pressure resistance up to 8 Bars d) Material of construction: Non-metallice) Max Temperature: 45°C (f) Shape: Circular (g) Cavity Lids storage bin 3) Automation assembly with accessories Compatibility: Stequa 411 AE RefilMake: Declibac or equivalent as approved by GE |
| 35 | M&L PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in walls, retaining walls of any thickness, size or shape including plasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases) all asspecified and directed. |
| 36 | M&L for 3mm thick MS sheet top cover over the sluice valve pit/filtration tank, made with MS angle iron/channel and MS sheet with locking arrangement including pad lock and providing suitable lifting handle for each cover/valve pit including cutting, drilling, bending,bricks work,plaster all as specified and directed. |
| 37 | M&L for cleaning of sedimentation water tank of 50,000 gln capacity complete as specified and directed by Engr-in-Charge, comprising the following works:- (a)Wash out the complete tank by opening wash out valves and dewatering the left out water fom tank manually or by pumping out through pump set (b)Taking out complete sludge/mud from the tank and removing and storing the same at low level area earmarked by Engr - in Charge (c)Cleaning of inner surface of walls of tank and bottom of tank with the help of wire brushes, scrapper and broom for cleaning of sludge from walls/floors(d)Washing of inner walls of tank by bleaching powder solutiion(e)The empty Water storage tank tank shall be first cleaned with fresh water twice and there after cleaned with fresh water sterililsed with 2% solution of potassium permagnate and writing location, capacity and date of cleaning with white paint firm and hand written over a black plate with synthetic enamel paint for entire satisfaction of Engr-in-Charge |
| 38 | All as per Item No 37 here-in-before but of Water Storage tank of 25000 to 40,000 gln capacity |
| 39 | All as per Item No 37 here-in-before but of Capacity 100000 gln |
| 40 | M&L in replacement for (25000 ltr sand filter tank ) filling the following filter media in the filter bed duly cleaned and washed with 5% concentrated sholution of NaOH complete including clening of tank as per standard procedure andreplacement of 80mm bore medium grade 6m lenth with water drop hole & assessories for supply of water into the chamber complete all as directed by Engr-in charge . (a) Filter pebbles - 1.4 Cum (b) -do- but size 3/41.5\"\"-0.90Cum(c ) -do- but size 1/2\"\"-3/4\"\" - 0.30 Cum (d) -do- but size 1/4\"\" - 3/8\"\"-0.30 Cum(e) -do- but size 1/8\"\" - 1/4\"\"- 0.50 Cun (f) Silica sand- 5.5 CumNote :- The pebbles and silica sand to be tested from NABL approved lab as per IS-8419 and certificate to be submitted by the contractor without any extra cost. |
| 41 | Supply and fixing in repairs HDPE coil water pipe long straight length PN-8 (Kg/cm²), Material Grades PE-63 • PE-100, of outer dia 63mm size ,ISI marked all as specified and directed |
| 42 | Supply and fixing in repairs HDPE coil water pipe long straight length PN-8 (Kg/cm²), Material Grades PE-63 • PE-100, of outer dia 110mm size, ISI marked all as specified and directed |
| 43 | M&L for opening filter manhole of pressure sand filter of capacity up to 11000 LPH& taking out existing choked / wornout filter media , cleaning inernal surface , stainer plate media , cleaning internal surface , stainer plate and painting internal surface with lead free black bituminous paint , replacement of PP stainers with new stainers , supply and charging of fresh filter media as per manufacturer recommendations . including repalcement of gaskets or any blots & nuts etc if required including synthetic enamle spray painting of filteration plant as per existing colour all as specified and directed by Engr-In-Charge. |
| 44 | M&L for servicing of Alum/Chlorine dosing system complete all as directed by Engr-In-Charge. |
| 45 | Supply and fix sceneries / glow signage boards of area exc 1.0 sqm but n. exc 2.0 sqm withbase framemade from angleiron andbacksideformACP sheet 3.00 mm thick with IP 68 ProtectionLED module , goodquality virgin monomerAcrylic sheet ,MES Logo letter with5 mm sun board channel , includingMounting arrangement / grouting with M S clamps with nut and bolts on pillers,poles,walls,completewiringandpower supplywith IP 68 protection, eachletter will be made withcomputeroffset for having same letter style and type/Size/sceneries and subject such as (Save Water,Save Life, Pani Bachao Jindagi Bachao etc.) to decideand approved by Engineer - in- chargesuch as (Save Water,Save Life,Pani Bachao Jindagi Bachao,Save Electricity etc.) complete all as specifiedanddirected. |
| 46 | M&L for images sceneries painting landscape of various water proof colours on wall or stone piece of any structures of area exc 6.0 sqm but n. exc 9.0 sqm with background paint such as nature adventures, wild nature, wild river, wild flowers in mountains, nature view evening, sun rise view, Gardens, water fall, Snow at himalyan, childerns are playing at park, Save Nature, save water, save Electricity, Birds, Animals, Entertainment with Instriuments, Jangal Life, Forest sceneries, all as specified and directed by Engineer-in-Charge. Note : The mentioned sceneries images details will decided by Engineer-in-Charge |
| 47 | Taking down cement plaster on brick work or stone walls etc incl raking out joints hacking for key scrubbng down with water complete all as directed. |
| 48 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement in external surfaces complete all as specified and directed. |
| 49 | M&L for preparing new plaster wall surface apply two coat of Cement based paint over one coat of alkali resitant primer complete all as specified and directed. |
| 50 | M&L for preparing old plaster surface and apply two coat of Cement based paint complete all as specified and directed. |
| 51 | Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 15mm size |
| 52 | Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm size |
| 53 | Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 25mm size |
